Equipment information
Thurlby Thandar Instruments TTI TGP110 Generator
Manufacturer:
No picture available!
Maybe you can upload a pic for the
Thurlby Thandar Instruments TTI TGP110 ?
If you have any other manuals for the
Thurlby Thandar Instruments TTI TGP110 you can upload the files here .
Model:
TGP110
Date:
2009
Category:
Group:
Description:
10MHz PULSE GENERATOR
Information
The TGP110 is a mains operated, 0·1Hz to 10MHz pulse Generator with independent variable 50Ω Main and CMOS/TTL Auxilliary outputs. Period, pulse width and delay are each selected by an 8 position range switch, plus a vernier control.
There are no duty cycle limitations and with the use of the Complement switch very stable pulse trains with duty cycles of ~0 to ~100% can be achieved, within the overall period and pulse width limitations. Error lamps indicate illegal settings of the pulse width and pulse delay controls.
The variable 50Ω output is controlled by a vernier over two switch-selectable ranges of 0·1V to 1·0V and 1V to 10V (from 50Ω), giving an overall range of 50mV to 5V into a 50Ω load.
Operating modes are run, external trigger, external gate, and manual one-shot or gate. The pulse modes are normal, square, double and delayed. The Complement button inverts both the Main and Auxilliary outputs.
A Sync output and a Trigger/Gate input are also provided.
Manual Type:
User Manual
Pages:
38
Size:
593.40 Kbytes (607645 Bytes)
Language:
english, german, french, italian
Revision:
Issue 9
Manual-ID:
48591-0530
Date:
Quality:
Electronic document, no scan, very well readable.
Upload date:
2013 11 02
MD5:
663cb8b0fb11bad5dd4479d2df066d3a
Downloads:
839
Information
Introduction 2
Specification 3
Safety 6
EMC 7
Installation 8
Operation 9
Maintenance 12
Instructions en Francais
Sécurité 13
Installation 14
Fonctionnement 15
Entretien 18
Bedienungsanleitung auf Deutsch
Sicherheit 19
Netzbetriebsspannung 20
Betrieb 21
Wartung 24
Istruzioni in Italiano
Sicurezza 25
Installazione 26
Funzionamento 27
Manutenzione 30
Instrucciones en Español
Seguridad
Instalación 31
Operación 33
Mantenimiento 36