Информация по оборудованию
|Brookdeal 9503SC Усилитель|
|Описание:||Precision Lock-in Amplifier|
The 9503 series is a family of Precision Lock-in Amplifiers which incorporate circuitry and system innovations which advance the state of the art and enable low level ac signals to be accurately measured - even in extremely noisy environments. Six models are available. These differ in the response modes available and the digital output facility. There are three basic versions; the standard 9503 with the normal (squarewave) response mode, the 9503C, which adds the analogue correlation mode and the 9503SC, which in addition to these two modes includes Sinetrac (fundamental only) mode and digital correlation mode. The SC version also has the signal gating facility. Each of these three versions is also available with a digital display and BCD output -these models carrying the suffix ’D’. Both the Sinetrac and analogue correlation modes are based on new pulse carrier modulation techniques*. These facilities either match the instrument response to the signal energy frequencies, even for complex waveforms, or suppress all harmonics to give a ’’fundamental only" response. When harmonic suppression is wanted, or when operating at low frequencies (<lkHz), these options will greatly extend conventional lock-in performance with convenient operation. Further details on all of these response modes are given in the detailed operating instructions in section 5.4 and in greater detail in various Technical Notes available on request. All the 9503 versions have excellent dynamic reserve and output stability - optimised by mode switching pushbuttons - so that it is very suitable for applications when the signal recovery power of a system has to be stretched to the very limit as well as for those applications where the measurement demands extreme precision. When the frequency range of operation has to be extended, the extra bandwidth options make such measurements possible -wide band and without range or circuit card changes. All the necessary Interface requirements are incorporated to build up the system capability by means of the range of slot-in modules. These can be fitted as specific applications requirements develop.
Эти руководства доступны для вышеуказанного оборудования:
|Brookdeal -- 9503SC -- Обслуживание и Руководство пользователя|
|Ручной тип:||Обслуживание и Руководство пользователя|
|Размер:||11.74 Mbytes (12310552 Bytes)|
|Качество:||Сканированный документ, читая частично плохо, частично не читается.|
|Дата загрузки:||26 Май 2017|
|Загрузки:||1030 начиная с 26 Май 2017|
1 introduction 1 2 specification 2 3 basic operating instructions 9 4 system description 15 5 facilities & detailed operating instructions 21 5.1 power 21 5.2 checks using the function 21 check facility 5.3 signal channel 25 5.4 response modes 33 5.5 reference channel 38 5.6 demodulator and output 41 5.7 option Oscillator 5012F 47 5.8 option omniphase 5042 48 5.9 option ratiometer 5047 49 5.10 option noise measurement 50 unit 5049 5.11 option installation 51 instructions 5.12 points to watch 52 5.13 options, mod 10, 11, 13, 14 54 6 fault finding guide 56 7 parts list 65 circuit diagrams
These terms and conditions contain rules about posting comments. By submitting a comment, you are declaring that you agree with these rules:
- Although the administrator will attempt to moderate comments, it is impossible for every comment to have been moderated at any given time.
- You acknowledge that all comments express the views and opinions of the original author and not those of the administrator.
- You agree not to post any material which is knowingly false, obscene, hateful, threatening, harassing or invasive of a person's privacy.
- The administrator has the right to edit, move or remove any comment for any reason and without notice.
Failure to comply with these rules may result in being banned from further commenting.
These terms and conditions are subject to change at any time and without notice.