Информация по оборудованию

Rohde & Schwarz AMIQ 1110.2003.04 Генератор
Производитель:
Rohde & Schwarz
Модель: AMIQ 1110.2003.04
Дата: 1999
Категория: Измерительная техника
Группа: Генератор
Описание: I/Q Modulation Generator
Информация:
                                    AMIQ is a modulation source for complex baseband signals of
state-of-the-art
telecommunication networks. Two synchronous outputs, which
are matched to each
other, and a large memory together with wide analog
bandwidth make AMIQ suitable
for universal use.
AMIQ has been designed to generate I and Q signals in the
baseband for present and
future types of modulation. "I" stands for the in-phase
component, "Q" for the
quadrature component.
The data to be output by AMIQ are normally calculated by an
external workstation (eg
PC). To control this calculation, Rohde & Schwarz offers two
programs: WINIQSIM
and AMIQ Control, a software for R&S vector signal generator
SMIQ (see Section
"Software for AMIQ Control on page 1.8"). The desired
information data stream (eg a
piece of speech) is generated and a modulation mode
selected. Then various
interference and distortions (so-called impairments) are
superimposed to this (ideal)
baseband signal. Thus a long sequence of sample values is
obtained, which are
loaded into AMIQ (via floppy, IEC/IEEE bus or RS-232
interface). The sequence in
the AMIQ memory is then output as analog I and Q signals
with the aid of fast and
accurate D/A converters. The outputs are (normally)
connected to the modulation
inputs of an I/Q modulator (eg SMIQ), which modulates the
baseband signal onto the
desired RF 

Эти руководства доступны для вышеуказанного оборудования:

Ручной тип: Руководство пользователя RohdeUndSchwarz-8080-Manual-Page-1-Picture
Страниц: 212
Размер: 2.03 Mbytes (2133294 Bytes)
Язык: английский
Редакция:
Руководство ID/номер: 1110.3339.12-08-
Дата:
Качество: Электронный документ, ни сканирование, очень хорошо читается.
Дата загрузки:
MD5: 25f7051798183147197278f03ff6bcec
Загрузки: 109 начиная с 11 Декабрь 2016
Информация:
Operating Manual
The operating manual consisting of a data sheet and 10
chapters contains comprehensive informa-
tion on characteristics, putting into operation, operation
and remote control of AMIQ:
The data sheet
 informs about guaranteed specifications and characteristics.
Chapter 1
 describes the operating principle of AMIQ, control elements
and connectors on
the front and rear panel as well as all procedures required
for putting the instru-
ment into operation and integration into a test system.
Chapter 2
 details instrument control via the remote interfaces with
the aid of program ex-
amples.
Chapter 3
 presents control and display elements.
Chapter 4
 describes key operating modes and special characteristics
of AMIQ with refer-
ence to possible applications.
Chapter 5
 describes programming of AMIQ, command processing, status
reporting system
and characteristics of hardware interfaces.
Chapter 6
 describes the remote-control commands defined for the
instrument. At the end of
the chapter an alphabetical list of commands is given.
Chapter 7
 contains program examples for a number of typical
applications of AMIQ.
Chapter 8
 describes preventive maintenance.
Chapter 9
 gives hints on troubleshooting and contains a list of error
messages.
Chapter 10
 contains an index for the operating manual
RohdeUndSchwarz-8080-Manual-Page-1-Picture


Comments (0)

No comments yet. Be the first!

Add Comment

* Required information
1000
Captcha Image
Powered by Commentics