Equipment information

Kepco BOP 1000M Power supply
Manufacturer:
Model:
BOP 1000M
Date:
1975
Category:
Group:
Description:

Information

The Kepco Mode! BOP 500M and BOP Ί000Μ are high voltage power sources, which combine the capabilities of fast programmable power supplies with a Class A output stage, which can respond bidirectionally from zero. The "BOP" can be operated in a "Voltage Stabilizing" or "Current Stabilizing” operating mode (selectable by a front panel switch}. The 80P incorporates two separate control channels, for local (front panel) or remote control of the output current and the output voltage, in addition, bounding currents for bipolar voltage and current limiting are provided which may be adjusted manually (by front panel controls) or can be remotely programmed. Ail control and bounding channels are connected to the bipolar (Class A) output stage via an "EXCLUSIVE-OR" gate, so that only one circuit is in control of the BOP output at any one time. Some applications are listed befow: A) VOLTAGE MODE OPERATION. (Current limiting either front panel adjusted or remotely programmed using the current limiting channel). 1) High speed, bipolar d-c Voltage Source (remote or locally controlled output). 2) Scaling or summing Amplifier with or without d-c bias. B) CURRENT MODE OPERATION (Voltage limiting either front panel adjusted or remotely programmed using the voltage limiting channel). 1) High speed, bipolar d-c Current source (remotely or locally controlled output). 2) Amplification of a-c currents, with or without d-c biasing.

show more

User Manual
Manual Type:
User Manual
Pages:
38
Size:
1.28 Mbytes (1343743 Bytes)
Language:
english
Revision:
Manual-ID:
Date:
Quality:
Scanned document, all readable.
Upload date:
2015 08 14
MD5:
f10a26ab22eecf98f185b5b5e37629f0
Downloads:
839

Information

This manual contains instructions for the installation, operation and maintenance for the Models BOP 500M and BOP 1000M Bipolar Operational Power Supplies.

show more