Informações do equipamento

Collins Telecommunications DL-1 Outro
Fabricante:
Collins Telecommunications
Modelo: DL-1
Data: 1966
Categoria: Rádio Comunicação,
Grupo: Outro
Descrição: 100 Watt Resistor Load
Informações:

The DL-1 is a 100-watt resistor load for use with any 100-watt Transmitter or Transceiver such as the 32S-1, 32S-3, or KWM-2. Refer to figure 1. Use of this dummy load allows alignment or adjustment of Transmitter circuits without sustained radiation of an interfering carrier. The DL-1 consists of four 50-ohm Globar resistors in a series-parallel arrangement to provide a 50-ohm resistive load. The DL-1 may be switched locally or remotely to select Antenna or dummy load for connection to Transmitter output. Jacks are provided for 6.3-volt ac 50- to 60-Hz relay coil supply, remote switching, and Transmitter and Antenna connections. The unit can be set on a table or desk or mounted on any chassis or rack frame by means of the two tapped holes on the bottom. As an alternate mounting, the four rubber feet can be removed and the unit mounted on a flat plate with four 6-32 screws.

Estes manuais estão disponíveis para os equipamentos acima:

Tipo manual: Serviço e Manual do Usuário Collins-9150-Manual-Page-1-Picture
Páginas: 4
Tamanho: 442.67 Kbytes (453289 Bytes)
Língua: Inglês
Revisão: Third Printing
Manual-ID/número: 523-0106000-101311
Data: 01 Janeiro 1966
Qualidade: Documento Scaned, a leitura parcialmente mal, não parcialmente legível.
Upload de data:
MD5: d6eca3d7bb677095b036b535aeb7af24
Downloads: 78 desde 04 Agosto 2017
Informações:

Collins-9150-Manual-Page-1-Picture


Comments (0)

No comments yet. Be the first!

Add Comment

* Required information
1000
Captcha Image
Powered by Commentics