Equipment information

Thurlby Thandar Instruments TTI HA1600 Inny
Manufacturer:
Model:
HA1600
Date:
2007
Category:
Group:
Description:
Power and Harmonics Anaylser with Flickermeter

Information

High performance power analyser The HA1600 is a high speed, high accuracy AC power analyser for single phase supplies of up to 16 Amps rms. The supply to be measured is connected via a dedicated input cable independently of the supply to the instrument. The output to the load is via a front panel mounted 'standard' mains connector. A wide range of power connectors is available including most European National types. The HA1600 can measure Watts, VA, Volts rms, Volts peak, Amps rms, Amps peak, Crest factors, THD, Power factor, Frequency and Inrush current. The large display can show multiple parameters simultaneously along with graphical representations of voltage and current waveforms. Dual 16 bit Analog to Digital converters continuously sample both voltage and current and give a wide dynamic range. A fast Digital Signal Processor gives the performance needed for continuous real-time analysis of the data. Advanced algorithms yield accurate results, using extended precision or floating point arithmetic wherever necessary. Compliance-quality harmonics analyser The HA1600 has been designed to make harmonics measurements both quick and simple. It measures harmonics from the 1st to the 40th and updates the display in real time. It is suitable for pre-compliance measurements using a normal mains supply and is capable of full compliance measurements to EN61000-3-2 in conjunction with a suitable power source (such as the AC1000). Capabilities include continuous monitoring of the supply voltage, continuous comparison to harmonic limits and timed test sequences with analysis of fluctuating harmonics. Compliance-quality flicker meter The HA1600 has the capability to operate as a compliance quality voltage variation and flicker meter in conformance with EN61000-3-3 and EN61000-4-15. Flicker severity can be measured in terms of Pst and Plt while simultaneously performing full analysis of voltage variations, including the calculation of the maximum value dmax, the difference between steady states dc and the change characteristic d(t). For pre-compliance testing, a current measurement method can be used, rather than voltage measurement, to eliminate the need for a clean power Generator and a reference impedance. A full range of interfaces A parallel printer Interface is included, for record keeping and archiving, and also a high speed RS-232 Interface is provided for use with either a printer or remote control Software running on a PC. The HA1600A also has a USB port for use with the HA-PC Link Plus Software. The internal Software of the instrument is stored in flash memory and can be updated through the serial port as the requirements of the measurement standards evolve. HA1600 and HA1600A The two versions of the instrument are in different cases, with slightly different front panel layouts. The HA1600A has a USB port. In all other respects the operation and performance of the two types is identical. Both use the same firmware, and this manual applies to either type if fitted with firmware version 2.80 or late

show more

Instrukcja obsługi
Manual type:
Instrukcja obsługi
Pages:
58
Size:
1.27 Mbytes (1332012 Bytes)
Language:
english
Revision:
Issue 9
Manual-ID:
48511-0400
Date:
Quality:
Dokument elektroniczny, bez skanowania, bardzo dobrze czytelne.
Upload date:
02 November 2013
MD5:
8720c545ae434476f6a32ae450a18559
Downloads:
720

Information

Introduction 2 Specification 3 Safety 5 EMC 7 Installation 8 Connections 9 Front Panel Connections 9 Rear Panel Connections 9 Initial Operation 10 Power Meter View 12 Power Meter Set-up 14 Waveform Graph View 15 Waveform Graph Set-up 16 Harmonics View 19 Harmonics View Set-up 20 Display Format - Histogram 20 Display Format – Tables 23 Test Control View 25 Test Control Set-up (Harmonics) 26 EN61000-3-3 Flicker and Fluctuations 31 Test Control Set-up (Flicker) 33 Meter View (Flicker) 35 Flicker Meter Page 35 Voltage Variation Page 36 Peak Inrush Current Measurement 38 Test Control Set-up (Peak Inrush Current) 40 Report View 41 Report Formats 42 Report Set-up 45 Compliance Measurements with the HA1600 47 Overview of Harmonics Measurements 47 Taking Harmonics Measurements 48 Taking Flicker and Fluctuation Measurements 50 HA-PC Link Plus Software 51 Software Installation 51 Operation of the HA-PC Link Plus Software 51 Installation of USB drivers 54 Maintenance & Calibration 55 Software Updates 56

show more

Instrukcja obsługi
Manual type:
Instrukcja obsługi
Pages:
57
Size:
1.28 Mbytes (1347096 Bytes)
Language:
english
Revision:
Issue 8
Manual-ID:
48511-0400
Date:
Quality:
Dokument elektroniczny, bez skanowania, bardzo dobrze czytelne.
Upload date:
03 November 2013
MD5:
df5913f6802787f4a7abf31d33b4fe57
Downloads:
1047

Information

Introduction 2 Specification 3 Safety 5 EMC 7 Installation 8 Connections 9 Front Panel Connections 9 Rear Panel Connections 9 Initial Operation 10 Power Meter View 12 Power Meter Set-up 14 Waveform Graph View 15 Waveform Graph Set-up 16 Harmonics View 19 Harmonics Set-up 20 Display Format - Histogram 20 Display Format – Tables 23 Test Control View 25 Test Control Set-up (Harmonics) 26 EN61000-3-3 Flicker and Fluctuations 31 Test Control Set-up (Flicker) 33 Meter View (Flicker) 35 Flicker Meter Page 35 Voltage Variation Page 36 Peak Inrush Current Measurement 38 Test Control Set-up (Peak Inrush Current) 40 Report View 41 Report Formats 42 Report Set-up 45 Compliance Measurements with the HA1600 47 Harmonics Measurements 47 Taking Harmonics Measurements 48 Taking Flicker and Fluctuation Measurements 49 HA-PC Link Plus Software 50 Software Installation 50 Operation of the HA-PC Link Plus Software 50 Installation of USB drivers 53 Maintenance & Calibration 54 Software Updates 55

show more

Dodaj Komentarz

* Wymagane
1000
Captcha

Komentarze

Brak komentarzy, bądź pierwszy!