Informacje o sprzęcie

Tektronix DTG5334 Generator
Producent:
Model:
DTG5334
Data:
Kategoria:
Grupa:
Opis:
Data Timing Generator

Informacje

The DTG5000 Series Data Timing Generator is a high-speed, multichannel signal Generator that creates a wide range of digital timing signals. The products are designed to generate a data pattern for standard and nonstandard pulses necessary for functional tests or characterization of legacy devices (TTL, CMOS, ECL) as well as the latest devices (PECL, LVDS, GTL, CML). Use the DTG5000 series to insert glitches and jitter as needed, and easily create patterns for device stress testing. In addition, to shorten testing time, use the sequence function to create signal sequences from combinations of various patterns. The DTG5000 Series Data Timing Generator supports six types of output modules (DTGM10, DTGM20, DTGM21, DTGM30, DTGM31 and DTGM32). Table 2-1 lists the key features of the data timing generators, and Table 2-2 lists the key features of the output modules.

pokaż więcej

Instrukcja serwisowa
Typ ręczny:
Instrukcja serwisowa
Strony:
226
Rozmiar:
10.62 Mbytes (11139059 Bytes)
Język:
english
Rewizja:
Ręczny ID:
071-1615-00
Data:
Jakość:
Dokument elektroniczny, bez skanowania, bardzo dobrze czytelne.
Data przesłania:
26 lipiec 2020
MD5:
ad0fd51ac9c0f4577c231bac5177f111
Pobrane:
1082

Informacje

This document applies to firmware version 2.0.0 and above. This manual is divided into sections, such as Specifications and Theory of Operation. Further, some sections are divided into subsections, such as Product Description and Removal and Installation Procedures. Sections containing procedures also contain introductions to those procedures. Be sure to read these introductions because they provide information needed to do the service correctly and efficiently. The following contains a brief description of each manual section. - Operating Information includes general information and operating instructions. - Theory of Operation contains circuit descriptions that support service to the module level. - Adjustment Procedures contains information that you need to manually adjust the data timing generator so that it meets specifications. - Maintenance contains information and procedures for performing preventive and corrective maintenance of the data timing generator. These instructions include cleaning, module removal and installation, and fault isolation to the module. - Replaceable Electrical Parts contains a statement referring you to Replaceable Mechanical Parts, where both electrical and mechanical modules are listed. - Diagrams contains block diagrams and an interconnection diagram. - Replaceable Mechanical Parts includes a table of all replaceable modules, their descriptions, and their Tektronix part numbers.

pokaż więcej

Instrukcja obsługi
Typ ręczny:
Instrukcja obsługi
Strony:
196
Rozmiar:
2.56 Mbytes (2686621 Bytes)
Język:
english
Rewizja:
Ręczny ID:
071-1609-01
Data:
Jakość:
Dokument elektroniczny, bez skanowania, bardzo dobrze czytelne.
Data przesłania:
26 lipiec 2020
MD5:
fd5062313d204ffc3afbe05f92fe7847
Pobrane:
496

Informacje

User Manual 2 This document applies to firmware version 2.0.0 and above. This manual contains information on the various functions of the DTG5000 Series Data Timing Generator. This manual is composed of the following chapters: - Reference explains the functions that the Data Timing Generator. This section also describes the concept of data timing generator pattern data for the reference when dealing with pattern data. - Appendices provides information about system recovery, setting up the operating system, and setting up the display device.

pokaż więcej

Dodaj Komentarz

* Wymagane
1000
Captcha

Komentarze

Brak komentarzy, bądź pierwszy!