Equipment information
Xantrex XPH 75-2D Power supply
Manufacturer:
No picture available!
Maybe you can upload a pic for the
Xantrex XPH 75-2D ?
If you have any other manuals for the
Xantrex XPH 75-2D you can upload the files here .
Model:
XPH 75-2D
Date:
2004
Category:
Group:
Description:
75V 2A DC Power Supply
Information
The XPH 75-2D is a dual output 300 watt PSU with multi-mode capability in a compact and
attractive case.
The multi-mode capability enables it to operate as a dual Power supply with two independent and
isolated outputs, or as a single Power supply of double the power. As a dual, each output
provides 0 to 75V at 0 to 2A (Mode A). As a single the output can be selected as either 0 to 75V
at 0 to 4A (Mode B) or 0 to 150V at 0 to 2A (Mode C). In single modes, the unused half of the unit
becomes completely inoperative and its displays are blanked.
Because of the higher voltages it can produce, the XPH 75-2D uses special safety binding posts
which can accept spade terminals, 4mm plugs, or bare-end wires without exposing any metal
parts.
The XPH series incorporates separate digital voltage and current meters on each output. The
meters use bright 14mm (0.56”) LED displays and have an update rate of 4 per second providing
near instantaneous response. Simultaneous metering of voltage and current provides accurate
information “at a glance” and avoids any possibility of misinterpretation. When an output switch is
set to “off”, the current limit setting is displayed enabling conditions to be set before the load is
connected.
Excellent line and load regulation are matched by low noise and good transient response. High
power efficiency ensures that the unit remains cool without any fan noise.
The XPH 75-2D has been designed to meet the stringent requirements of relevant IEC standards
for safety and EMC, including harmonics emissions. All outputs are intrinsically short circuit proof,
and are protected against external voltages and reverse currents.
Manual Type:
User Manual
Pages:
32
Size:
796.60 Kbytes (815723 Bytes)
Language:
english, german, french, italian, spanish
Revision:
2
Manual-ID:
975-0102-01-02
Date:
2004 07 01
Quality:
Electronic document, no scan, very well readable.
Upload date:
2019 08 18
MD5:
7b8eda8b96bd8b463f7e80ece6059f6f
Downloads:
300
Information
Introduction
Specification
Safety
EMC
Installation
Connections
Operation
Maintenance
Calibration
Instructions en Francais
Sécurité
Installation
Connexions
Fonctionnement
Maintenance
Bedienungsanleitung auf Deutsch
Sicherheit
Installation
Anschlüsse
Betrieb
Wartung
Istruzioni in Italiano
Sicurezza
Installazione
Collegamenti
Funzionamento
Manutenzione
Instrucciones en Español
Seguridad
Instalación
Conexiones
Operación
Mantenimiento
Warranty Information