Equipment information
Conar Coletronics Service Inc. 230 Analyzer
Manufacturer:
No picture available!
Maybe you can upload a pic for the
Conar Coletronics Service Inc. 230 ?
If you have any other manuals for the
Conar Coletronics Service Inc. 230 you can upload the files here .
Model:
230
Date:
Category:
Group:
Description:
Tuned Signal Tracer
Information
THE CONAR MODEL 230 TUNED SIGNAL TRACER
With a tuned signal tracer you can sample the signal at any
point in a radio receiver using either transistors or tubes,
or in any audio Amplifier. With the signal tracer you can
hear how the signal sounds, and thus locate distortion,
intermittent reception, hum, and any other type of
interference. The signal tracer also measures the amplitude
of signals so you can tell accurately the gain or loss in
signal strength in any stage. This signal tracer can be used
as a tuned radio-frequency receiver for receiving radio
stations in the broadcast band.
Take the necessary time to do a really good job of
assembling your signal tracer. If you build your signal
tracer exactly as instructed in this manual you will have an
extremely valuable service instrument.
We have put the diagrams that you will keep referring to on
sheets stapled into the center of this manual, so that you
can remove them and have them handy to refer to. Carefully
open the staples and remove the top two sheets, then close
the staples firmly again.
Manual Type:
Service and User Manual
Pages:
41
Size:
3.29 Mbytes (3447275 Bytes)
Language:
english
Revision:
Manual-ID:
Date:
Quality:
Scanned document, reading partly badly, partly not readable.
Upload date:
2017 08 05
MD5:
5cb178b4280d8d5d6e693648d11d98bb
Downloads:
430
Information
Assembling and Using