Informacje o sprzęcie

Kikusui Electronics Corporation PAD 250-8L Zasilanie
Kikusui Electronics Corporation
Modelu: PAD 250-8L
Kategorii: Przyrządy pomiarowe
Grupa: Zasilanie

The PAD-L Power supply is designed for high operation reliability and excellent electrical performance. It is a universal-purpose industrial Power supply which can be used as a variable power source for research and development, or as a fixed power source for long time aging test. Features of the PAD-L Power supply can be summarized as follows: 1. Improved«power factor at low output voltage: A choke input system is used for the rectifier filter circuit, thereby reducing the apparent input current and improving the power factor. This led to a smaller power transformer and consequently to a compact and light power supply. 2. Less waveform distortion caused to the AC input line: As the choke input system is used, the input current waveform is less distorted with harmonics, thereby reducing waveform .. distortion to the AC input line.—......................................................· 3. Excellent temperature coefficient: Very low temperature drift characteristics of 50 ppm/°C is attained by using premium-quality parts, improved circuits, and forced air cooling. Time-elapse drift (aging drift) also is very low. „ .... _ . . . . 4. Fast transient response: A wide-band error Amplifier is used to ensure stable frequency - gain, phase characteristics. 5. Low ripple and noise voltages: Ripple and noise voltages are low, both in nos and peak values. The output voltage is finely adjustable from 0 V to the rated voltage with a 10-turn potentiometer The Power supply has a current/voltage limit switch to preset a current/voltage value. The set value of constant-voltage/ constant-current operation can be checked when in operation. The Power supply has internal protection such as voltage detector* current detector and temperature detector circuits. An overvoltage protector (ÖVP), voltage adjustable from the front panel, also is incorporated as a standard feature. A high speed overvoltage protector (a thyristor crowbar protection circuit) is available as an option. The Power supply is boused in a casing for bench top use. It can be installed on a standard EIA (JIS) rack. - The user is requested to read thoroughly. this instruction manua1 before' operating the Power supply. · * It is highly recommended to use the thyristor crowbar highspeed overvoltage protector (OVP: option) for a load whose - allowable voltage range is very narrow and which could be damaged when a slight overvoltage is applied.

Te Podręczniki są dostępne dla powyższego urządzenia:

Typ instrukcji: Instrukcja obsługi Kikusi-7055-Manual-Page-1-Picture
Stron: 67
Rozmiar: 3.97 Mbytes (4167777 Bytes)
Język: Angielski
Podręcznik numer:
Jakość: Skanowany dokument, czytając częściowo źle, nie częściowo czytelny.
Data wysłania:
MD5: 5145d55194ad359e4f015b57e925aecb
Pliki do pobrania: 1316 od 14 sierpień 2015


Comments (0)

No comments yet. Be the first!

Add Comment

* Required information
Captcha Image
Powered by Commentics