Apparatuur informatie

Tektronix 492P Spectrum analyzer
Fabrikant:
Tektronix
Model: 492P
Datum: 1979
Categorie: Meetinstrumenten
Groep: Spectrum analyzer
Beschrijving:
Informatie:

The Tektronix 492 and 496 are two spectrum analyzers that go where you go. Their compact size, light weight, and rugged design combine to offer unmatched portability in laboratory quality analyzers. Single-handle carry and portable form factor make them ready to travel. The 492 and 496 move as easily in the field as in the design lab or systems test area. They even fit under an airplane seat. You can count on the same exceptional performance no matter where you're working. If its antenna test measurements, point-topoint transmission maintenance, or any number of critical field applications, the 492 and 496 work with you. For on-site applications, reduced warmup time means reduced measurement time. Typical long-term frequency drift of 5 kHz/10 minutes after 30 minute warm up for the 492 and 492P; 2 kHz/10 minutes after 30 minute warm up for the 496 and 496P. Here's Proof of Their Performance The Tektronix 492 has the widest amplitude calibrated frequency range of any spectrum Analyzer on the market: 50 kHz to 220 GHz —to 21 GHz in coax, from 18 GHz to 220 GHz using Tektronix external waveguide mixers. The VHF/UHF 496 covers from 1 kHz to 1.8 GHz. They offer 80 dB dynamic range on-screen and excellent sensitivity, with an average noise level of — 123dBm at 100 Hz resolution bandwidth for the 492, -127 dBm at 30 Hz resolution bandwidth for the 496. Low phase noise —70 dBc at only 3 kHz offset —for accurate small-signal analysis. High stability for signal source spectral purity analysis, with residual FM of no more than 50 Hz peak-to-peak for the 492, 10 Hz peakto- peak for the 496. For precise measurement of signal differences, there's amplitude comparison in super-fine 0.25 dB steps. And the 496 provides 1 kHz frequency resolution in AF mode. All this and more in one compact package that goes where you go. Programmability/IEEE (GPIB) Compatibility The GPIB Interface enables full control of all measurement settings. Additional control of horizontal (span) and vertical display (1 dB to 15 dB/div) and smart functions (such as signal search) provide added measurement versatility. A desktop computer or computer controller (4052A or 4041) and a 492P or 496P Spectrum Analyzer provide repetitive measurements, data collection, and consistent, rapid results. Automated testing and monitoring may include data correction and analysis enabling complex measurements such as total harmonic distortion and power spectral density. The thermal printer of the 4041 or hard copiers for 4052A simplify documenting tests and spectral displays in hard copy form. Programmability Now—or Later Most manual 490 Series spectrum analyzers can be converted into fully programmable, GPIB compatible analyzers. Conversion may be performed via the Tektronix Service Center near you. Easy to Use—Anywhere Tektronix designed the 492 and 496 to handle your measurement task with microprocessor- aided ease. Setting frequency, span and reference level is a simple three-knob operation. Most-used functions are automatically controlled. Digital storage and signal processing eliminate time-consuming display adjustments. And constant tuning rate helps you position a signal quickly and accurately. All part of the convenience and capability the 492 and 496 deliver, on site or on the bench.

Deze handboeken zijn beschikbaar voor de bovengenoemde apparatuur:

Manueel de Type: Servicehandboek Tektronix-6072-Manual-Page-1-Picture
Pagina 's: 303
Grootte: 14.91 Mbytes (15630373 Bytes)
Taal: Engels
Herziening: Revised
Handleiding-ID/Number: 070-3783-01
Datum: februari 1984
Kwaliteit: Gescand document alle leesbaar.
Uploaden datum:
MD5: 326a72baa74fe663b49d33a6d8ea38c4
Downloads: 644 Sinds 25 mei 2014
Informatie:

Service Manual Volume I Introduction The Service manual consists of two volumes that contain information necessary to test, adjust, and service the Portable Rackmount/Benchtop 492/492P Spectrum Analyzer. The intent is to provide as complete information as possible as an aid in servicing this instrument. The Table of Contents at the beginning of Volume 1 lists contents of each section contained within Volume 1. Change information that involves manual corrections and/or additions pending manual reprint and bind, is located at the back of the Service manual in the CHANGE INFORMATION section. History information with the updated data is integrated into the text or diagrams when a page or diagram is updated. Revised pages have a revision date in the lower inside corner of the page. The manual may contain revisions that do not apply to your instrument; however, history information with updated data, is integrated into the text or diagram when the page or diagram is revised.

Tektronix-6072-Manual-Page-1-Picture


Manueel de Type: Servicehandboek Tektronix-6075-Manual-Page-1-Picture
Pagina 's: 109
Grootte: 4.44 Mbytes (4659013 Bytes)
Taal: Engels
Herziening:
Handleiding-ID/Number:
Datum:
Kwaliteit: Gescand document alle leesbaar.
Uploaden datum:
MD5: 35b7b44fcf62ef6dc71405354038b790
Downloads: 634 Sinds 25 mei 2014
Informatie:

Service Manual Volume 2 - C Replaceable Mechanical Parts & Manual Change Information

Tektronix-6075-Manual-Page-1-Picture


Manueel de Type: Gegevensblad Tektronix-6064-Manual-Page-1-Picture
Pagina 's: 5
Grootte: 4.23 Mbytes (4431347 Bytes)
Taal: Engels
Herziening:
Handleiding-ID/Number:
Datum:
Kwaliteit: Gescand document alle leesbaar.
Uploaden datum:
MD5: 4ad6391901e13bbd97a963c8ad026115
Downloads: 1008 Sinds 23 mei 2014
Informatie:

Tektronix-6064-Manual-Page-1-Picture


Manueel de Type: Gegevensblad Tektronix-6063-Manual-Page-1-Picture
Pagina 's: 20
Grootte: 9.39 Mbytes (9848000 Bytes)
Taal: Engels
Herziening:
Handleiding-ID/Number:
Datum: 1980
Kwaliteit: Gescand document alle leesbaar.
Uploaden datum:
MD5: 4cb79f46701fb4f8035dd4f648aff3e9
Downloads: 630 Sinds 23 mei 2014
Informatie:

Tektronix-6063-Manual-Page-1-Picture


Manueel de Type: Gebruikershandleiding Tektronix-2504-Manual-Page-1-Picture
Pagina 's: 54
Grootte: 1.61 Mbytes (1685266 Bytes)
Taal: Engels
Herziening: Revision 2, May 1985
Handleiding-ID/Number: 070-2729-01
Datum: mei 1985
Kwaliteit: Gescande document, lezen deels slecht, deels niet leesbaar.
Uploaden datum:
MD5: cf36e0c858c19384a1352b789020d9c7
Downloads: 1395 Sinds 13 juni 2011
Informatie:

Tektronix-2504-Manual-Page-1-Picture


Manueel de Type: Servicehandboek Tektronix-6073-Manual-Page-1-Picture
Pagina 's: 134
Grootte: 6.20 Mbytes (6500435 Bytes)
Taal: Engels
Herziening:
Handleiding-ID/Number:
Datum: maart 1983
Kwaliteit: Gescand document alle leesbaar.
Uploaden datum:
MD5: ddc71154727884dd7109ae5fa62adb01
Downloads: 645 Sinds 25 mei 2014
Informatie:

Service Manual VOLUME 2 - A REPLACEABLE ELECTRICAL PARTS

Tektronix-6073-Manual-Page-1-Picture


Manueel de Type: Servicehandboek Tektronix-6074-Manual-Page-1-Picture
Pagina 's: 254
Grootte: 13.29 Mbytes (13936162 Bytes)
Taal: Engels
Herziening:
Handleiding-ID/Number:
Datum:
Kwaliteit: Gescand document alle leesbaar.
Uploaden datum:
MD5: eadb934c8f3b12e896045a6fd7ebc041
Downloads: 674 Sinds 25 mei 2014
Informatie:

Service Manual Volume 2 - B DIAGRAMS & CIRCUIT BOARD ILLUSTRATIONS

Tektronix-6074-Manual-Page-1-Picture


Manueel de Type: Servicehandboek Tektronix-12009-Manual-Page-1-Picture
Pagina 's: 342
Grootte: 33.41 Mbytes (35029684 Bytes)
Taal: Engels
Herziening:
Handleiding-ID/Number: 070-3784-01
Datum: 01 december 1987
Kwaliteit: Elektronisch document, geen scan, zeer goed leesbaar.
Uploaden datum:
MD5: 93e923a2be58c41bf95d7da6daf98510
Downloads: 16 Sinds 13 september 2019
Informatie:

Service Manual Volume 2 Includes a lot of Manual Change Informations

Tektronix-12009-Manual-Page-1-Picture


Comments (0)

No comments yet. Be the first!

Add Comment

* Required information
1000
Captcha Image