Apparatuur informatie

Tektronix P6205 Sonde
Fabrikant:
Model:
P6205
Datum:
Categorie:
Groep:
Omschrijving:
FET Probe

Informatie

Product Description The P6205 Probe provides high-frequency measurement capability without the capacitive loading and performance limitations inherent in passive resistive-divider type probes. FETs are used in the P6205 to establish the characteristic high input impedance at high frequency of an active Probe. The P6205 features a 750 MHz bandwidth with an input impedance of 1 MW in parallel with 2 pF. You must terminate the P6205 Probe output into 50 W. The P6205 includes the TEKPROBEt Level 2 Interface. When used with a fully TEKPROBE interface-compatible oscilloscope, the P6205 Probe is powered by the host instrument and provides the Oscilloscope with the Probe model number, serial number, and attenuation factor. When installed on a fully compatible oscillo- scope, the Oscilloscope channel input is automatically set to 50 W and the display readouts are corrected for the Probe attenuation factor. Oscilloscopes without the TEKPROBE Interface The P6205 is an active Probe that requires external power to operate. If your Oscilloscope is not equipped with the TEKPROBE interface, we recommend that you use the Tektronix 1103 TEKPROBE Power Supply. By connecting the Probe to the 1103 power supply, and the Power supply output to your Oscilloscope input, you can use the P6205 Probe with oscilloscopes having conventional BNC inputs. The 1103 can power two P6205 probes simultaneously. To maintain the best possible high-frequency response with the 1103 power supply, keep the cable connecting the 1103 output to the Oscilloscope input as short as possible. You must use an Oscilloscope with 50 W input impedance with this system.

toon meer

Service-en gebruikershandleiding
Handleidingen type:
Service-en gebruikershandleiding
Pagina’s:
74
Grootte:
282.35 Kbytes (289126 Bytes)
Taal:
english
Herziening:
Handleidingen-ID:
070-8202-01
Datum:
Kwaliteit:
Elektronisch document, geen scan, zeer goed leesbaar.
Upload datum:
14 september 2019
MD5:
e1ccf1de8e220be09571840fc0058734
Downloads:
107

Informatie

This manual provides operating and maintenance information for the Tektronix P6205 FET probe. The manual is organized into the following sections: Getting Started provides a product overview and introduction to probe features and accessories. Operating Basics discusses techniques for improving measure- ment accuracy. Specifications lists the probe warranted characteristics. Performance Verification contains procedures to verify probe performance. Maintenance contains inspection and cleaning procedures and instructions for replacing probe modules. Replaceable Parts lists the standard and optional probe parts and accessories and provides ordering information.

toon meer

Add Comment

* Required information
1000
Captcha Image

Comments

No comments yet. Be the first!