Equipment information
Tektronix THS720P Oscilloscope
Manufacturer:
No picture available!
Maybe you can upload a pic for the
Tektronix THS720P ?
If you have any other manuals for the
Tektronix THS720P you can upload the files here .
Model:
THS720P
Date:
1998
Category:
Group:
Description:
TekScope
Information
The THS710A, THS720A, THS730A, and THS720P TekScope
instruments combine a two-channel Oscilloscope and a digital
multimeter (DMM) in a rugged, handheld package.
General Features
Battery power or external power
High-resolution, high-contrast display with temperature
compensation for clear visibility over a wide temperature range
Onboard waveform, data, and setup storage
RS-232 communication port to load setups, download wave-
forms, and make hard copies
Fully programmable through the RS-232 communication port
Oscilloscope Features
The TekScope instrument is a powerful, two-channel Oscilloscope
with the following features:
Autoranging for quick setup and hands-free operation
200 MHz (THS730A), 100 MHz (THS720A and THS720P) or
60 MHz (THS710A) bandwidth with selectable 20 MHz
bandwidth limit
1 GS/s (THS730A), 500 MS/s (THS720A and THS720P), or
250 MS/s (THS710A) sample rate and 2,500 point record length
Separate digitizers for each channel (both channels always
acquire simultaneously)
Waveform averaging and enveloping with hardware peak
detection
Digital Real Time digitizing (up to five-times oversampling),
sin(x)/x interpolation, and peak-detect acquisition to limit the
possibility of aliasing
Independently isolated channels to allow improved safety for
measurements to 1000 VRMS while floating up to 600 VRMS
using P5102 probes
Cursors and 21 continuously updated, automatic measurements
Simultaneous Oscilloscope and meter operation on the same or
on separate signals
Advanced pulse, video, external, and motor trigger (THS720P)
capabilities
Harmonic analysis and power measurements (THS720P)
Meter Features
The TekScope instrument is also a full-featured DMM with the
following features:
True RMS VAC, VDC, , continuity, and diode-check functions
Autoranging or manual ranging
Data logger plot of meter measurements over a period of time
Max, min, Delta max-min, relative-delta, and average statistics in
the readout
Bar graph for an “analog meter” feel
Independently isolated meter inputs allow floating measurements
to 600 VRMS
Overvoltage indicator warns when an overvoltage is applied to
the input
Manual Type:
Service Manual
Pages:
142
Size:
1.56 Mbytes (1639614 Bytes)
Language:
english
Revision:
First Edition
Manual-ID:
070-9752-01
Date:
1998 02 01
Quality:
Electronic document, no scan, very well readable.
Upload date:
2017 12 26
MD5:
08527beb63f26138003832f4597902b0
Downloads:
2083
Information
This is the Service Manual for the THS710A, THS720A,
THS730A, and
THS720P TekScope instruments. This manual provides
information to trouble-
shoot and repair the instrument to the module level.
Manual Type:
User Manual
Pages:
372
Size:
1.11 Mbytes (1164116 Bytes)
Language:
english
Revision:
Manual-ID:
070-9751-01
Date:
Quality:
Electronic document, no scan, very well readable.
Upload date:
2019 09 17
MD5:
0f25ae783d1a27bc82402c9d8191d61a
Downloads:
1432
Information
This is the Programmer Manual for the THS710A, THS720A,
THS730A, and THS720P TekScope instruments.This manual
provides information about operating your instrument using the
RS-232 Interface.
Manual Type:
User Manual
Pages:
230
Size:
1.34 Mbytes (1405555 Bytes)
Language:
english
Revision:
Manual-ID:
070-9731-05
Date:
1998 02 01
Quality:
Electronic document, no scan, very well readable.
Upload date:
2019 09 16
MD5:
a70ffcac601fc15d6a0843a6b15febb9
Downloads:
1215
Information
This document applies to serial number B010100
and above and firmware version 1.13 and above.
General Safety Summary ... .
Preface ... .
In This Manual ... .
Conventions ... .
Getting Started
Product Description ... .
Replacing the Battery Pack ... .
Using External Power ... .
Using the Tilt Stand ... .
Functional Check ... .
Operating Basics
Functional Overview ... .
Understanding the Front Panel ... .
Using Scope Mode ... .
Using Meter Mode ... .
Compensating the Oscilloscope Probes ... .
Compensating the Oscilloscope Signal Path ... .
Taking Floating Measurements ... .
General-Purpose Application Examples ... .
Displaying an Unknown Signal ... .
Measuring Resistance ... .
Measuring the Frequency of a Clock Signal ... .
Measuring Propagation Delay ... .
Triggering on a Missing Data Pulse ... .
Detecting Narrow Glitches ... .
Triggering on a Third Signal ... .
Analyzing a Serial Data Communication Link ... .
Triggering on a Video Signal ... .
Power-Measurement Application Examples ... .
Testing a Switching Transistor Drive Circuit ... .
Measuring Instantaneous Power Dissipation
in a Switching Transistor ... .
Monitoring for Power Surges and Dropouts ... .
Detecting a Missing Power Cycle ... .
Measuring Harmonic Current (THS720P) ... .
Taking Power Measurements (THS720P) ... .
Measuring Motor Start-Up Current ... .
Triggering at a Specific Motor RPM ... .
Triggering on a Motor Drive Waveform (THS720P) ... .
Reference
Introduction to Reference ... .
ACQUIRE ... .
AUTORANGE ... .
CURSOR ... .
DISPLAY/HARMONICS ... .
HARD COPY ... .
HOLD ... .
HORIZONTAL Controls ... .
MEAS ... .
METER Mode ... .
SAVE/RECALL ... .
SCOPE Mode ... .
TRIGGER Controls ... .
UTILITY ... .
VERTICAL Controls ... .
Appendices
Appendix A: Specifications ... .
Appendix B: Factory Setup ... .
Appendix C: Accessories ... .
Appendix D: Performance Verification ... .
Test Record ... .
Performance Verification Procedures ... .
Appendix E: General Care and Cleaning ... .
General Care ... .
Cleaning ... .
Glossary and Index
Manual Type:
Service Manual
Pages:
130
Size:
1.65 Mbytes (1730126 Bytes)
Language:
english
Revision:
First Edition
Manual-ID:
070-9752-02
Date:
1998 02 01
Quality:
Electronic document, no scan, very well readable.
Upload date:
2017 12 25
MD5:
f71bb14f088b68ebf2142c9e4350d91d
Downloads:
1969
Information
General Safety Summary ... .
... .
Service Safety Summary ... .
... .
Preface ... .
... .
Related Manuals ... .
... .
Conventions ... .
... .
Specifications ... .
... .
Operating Information ... .
... .
Internal and External Power Sources ... .
... .
Understanding the Front Panel ... .
... .
Connecting and Using the Probes ... .
... .
Theory of Operation ... .
... .
Main Board ... .
... .
Inverter Board ... .
... .
Display Module ... .
... .
Switch Assembly ... .
... .
Performance Verification ... .
... .
Test Record ... .
... .
Performance Verification Procedures ... .
... .
Adjustment Procedures ... .
... .
Required Equipment ... .
... .
Overview of the Adjustment Process ... .
... .
Accessing the Adjustment-Lockout Jumper ... .
... .
Oscilloscope Adjustment ... .
... .
Meter Adjustment ... .
... .
Replacing the Adjustment-Lockout Jumper ... .
... .
Maintenance ... .
... .
Preparation ... .
... .
Preventing ESD ... .
... .
Inspection and Cleaning ... .
... .
Removal and Installation Procedures ... .
... .
Troubleshooting ... .
... .
Unpacking and Repacking Instructions ... .
... .
Options ... .
... .
Electrical Parts List ... .
... .
Diagrams ... .
... .
Mechanical Parts List ... .
... .
Parts Ordering Information ... .
... .
Using the Replaceable Parts List ... .
... .