Apparatuur informatie

Tektronix THS710A Oscilloscoop
Fabrikant:
Tektronix
Model: THS710A
Datum: 1998
Categorie: Meetinstrumenten
Groep: Oscilloscoop
Beschrijving: TekScope
Informatie:

The THS710A, THS720A, THS730A, and THS720P TekScope instruments combine a two-channel Oscilloscope and a digital multimeter (DMM) in a rugged, handheld package. General Features Battery power or external power High-resolution, high-contrast display with temperature compensation for clear visibility over a wide temperature range Onboard waveform, data, and setup storage RS-232 communication port to load setups, download wave- forms, and make hard copies Fully programmable through the RS-232 communication port Oscilloscope Features The TekScope instrument is a powerful, two-channel Oscilloscope with the following features: Autoranging for quick setup and hands-free operation 200 MHz (THS730A), 100 MHz (THS720A and THS720P) or 60 MHz (THS710A) bandwidth with selectable 20 MHz bandwidth limit 1 GS/s (THS730A), 500 MS/s (THS720A and THS720P), or 250 MS/s (THS710A) sample rate and 2,500 point record length Separate digitizers for each channel (both channels always acquire simultaneously) Waveform averaging and enveloping with hardware peak detection Digital Real Time digitizing (up to five-times oversampling), sin(x)/x interpolation, and peak-detect acquisition to limit the possibility of aliasing Independently isolated channels to allow improved safety for measurements to 1000 VRMS while floating up to 600 VRMS using P5102 probes Cursors and 21 continuously updated, automatic measurements Simultaneous Oscilloscope and meter operation on the same or on separate signals Advanced pulse, video, external, and motor trigger (THS720P) capabilities Harmonic analysis and power measurements (THS720P) Meter Features The TekScope instrument is also a full-featured DMM with the following features: True RMS VAC, VDC, , continuity, and diode-check functions Autoranging or manual ranging Data logger plot of meter measurements over a period of time Max, min, Delta max-min, relative-delta, and average statistics in the readout Bar graph for an “analog meter” feel Independently isolated meter inputs allow floating measurements to 600 VRMS Overvoltage indicator warns when an overvoltage is applied to the input

Deze handboeken zijn beschikbaar voor de bovengenoemde apparatuur:

Manueel de Type: Servicehandboek Tektronix-9954-Manual-Page-1-Picture
Pagina 's: 142
Grootte: 1.56 Mbytes (1639614 Bytes)
Taal: Engels
Herziening: First Edition
Handleiding-ID/Number: 070-9752-01
Datum: 01 februari 1998
Kwaliteit: Elektronisch document, geen scan, zeer goed leesbaar.
Uploaden datum:
MD5: 08527beb63f26138003832f4597902b0
Downloads: 636 Sinds 26 december 2017
Informatie:

This is the Service Manual for the THS710A, THS720A, THS730A, and THS720P TekScope instruments. This manual provides information to trouble- shoot and repair the instrument to the module level.

Tektronix-9954-Manual-Page-1-Picture


Manueel de Type: Servicehandboek Tektronix-9953-Manual-Page-1-Picture
Pagina 's: 130
Grootte: 1.65 Mbytes (1730126 Bytes)
Taal: Engels
Herziening: First Edition
Handleiding-ID/Number: 070-9752-02
Datum: 01 februari 1998
Kwaliteit: Elektronisch document, geen scan, zeer goed leesbaar.
Uploaden datum:
MD5: f71bb14f088b68ebf2142c9e4350d91d
Downloads: 625 Sinds 25 december 2017
Informatie:

General Safety Summary ... . ... . Service Safety Summary ... . ... . Preface ... . ... . Related Manuals ... . ... . Conventions ... . ... . Specifications ... . ... . Operating Information ... . ... . Internal and External Power Sources ... . ... . Understanding the Front Panel ... . ... . Connecting and Using the Probes ... . ... . Theory of Operation ... . ... . Main Board ... . ... . Inverter Board ... . ... . Display Module ... . ... . Switch Assembly ... . ... . Performance Verification ... . ... . Test Record ... . ... . Performance Verification Procedures ... . ... . Adjustment Procedures ... . ... . Required Equipment ... . ... . Overview of the Adjustment Process ... . ... . Accessing the Adjustment-Lockout Jumper ... . ... . Oscilloscope Adjustment ... . ... . Meter Adjustment ... . ... . Replacing the Adjustment-Lockout Jumper ... . ... . Maintenance ... . ... . Preparation ... . ... . Preventing ESD ... . ... . Inspection and Cleaning ... . ... . Removal and Installation Procedures ... . ... . Troubleshooting ... . ... . Unpacking and Repacking Instructions ... . ... . Options ... . ... . Electrical Parts List ... . ... . Diagrams ... . ... . Mechanical Parts List ... . ... . Parts Ordering Information ... . ... . Using the Replaceable Parts List ... . ... .

Tektronix-9953-Manual-Page-1-Picture


Manueel de Type: Gebruikershandleiding Tektronix-12064-Manual-Page-1-Picture
Pagina 's: 230
Grootte: 1.34 Mbytes (1405555 Bytes)
Taal: Engels
Herziening:
Handleiding-ID/Number: 070-9731-05
Datum: 01 februari 1998
Kwaliteit: Elektronisch document, geen scan, zeer goed leesbaar.
Uploaden datum:
MD5: a70ffcac601fc15d6a0843a6b15febb9
Downloads: 36 Sinds 16 september 2019
Informatie:

This document applies to serial number B010100 and above and firmware version 1.13 and above. General Safety Summary ... . Preface ... . In This Manual ... . Conventions ... . Getting Started Product Description ... . Replacing the Battery Pack ... . Using External Power ... . Using the Tilt Stand ... . Functional Check ... . Operating Basics Functional Overview ... . Understanding the Front Panel ... . Using Scope Mode ... . Using Meter Mode ... . Compensating the Oscilloscope Probes ... . Compensating the Oscilloscope Signal Path ... . Taking Floating Measurements ... . General-Purpose Application Examples ... . Displaying an Unknown Signal ... . Measuring Resistance ... . Measuring the Frequency of a Clock Signal ... . Measuring Propagation Delay ... . Triggering on a Missing Data Pulse ... . Detecting Narrow Glitches ... . Triggering on a Third Signal ... . Analyzing a Serial Data Communication Link ... . Triggering on a Video Signal ... . Power-Measurement Application Examples ... . Testing a Switching Transistor Drive Circuit ... . Measuring Instantaneous Power Dissipation in a Switching Transistor ... . Monitoring for Power Surges and Dropouts ... . Detecting a Missing Power Cycle ... . Measuring Harmonic Current (THS720P) ... . Taking Power Measurements (THS720P) ... . Measuring Motor Start-Up Current ... . Triggering at a Specific Motor RPM ... . Triggering on a Motor Drive Waveform (THS720P) ... . Reference Introduction to Reference ... . ACQUIRE ... . AUTORANGE ... . CURSOR ... . DISPLAY/HARMONICS ... . HARD COPY ... . HOLD ... . HORIZONTAL Controls ... . MEAS ... . METER Mode ... . SAVE/RECALL ... . SCOPE Mode ... . TRIGGER Controls ... . UTILITY ... . VERTICAL Controls ... . Appendices Appendix A: Specifications ... . Appendix B: Factory Setup ... . Appendix C: Accessories ... . Appendix D: Performance Verification ... . Test Record ... . Performance Verification Procedures ... . Appendix E: General Care and Cleaning ... . General Care ... . Cleaning ... . Glossary and Index

Tektronix-12064-Manual-Page-1-Picture


Manueel de Type: Gebruikershandleiding Tektronix-12065-Manual-Page-1-Picture
Pagina 's: 372
Grootte: 1.11 Mbytes (1164116 Bytes)
Taal: Engels
Herziening:
Handleiding-ID/Number: 070-9751-01
Datum:
Kwaliteit: Elektronisch document, geen scan, zeer goed leesbaar.
Uploaden datum:
MD5: 0f25ae783d1a27bc82402c9d8191d61a
Downloads: 43 Sinds 17 september 2019
Informatie:

This is the Programmer Manual for the THS710A, THS720A, THS730A, and THS720P TekScope instruments.This manual provides information about operating your instrument using the RS-232 Interface.

Tektronix-12065-Manual-Page-1-Picture


Comments (0)

No comments yet. Be the first!

Add Comment

* Required information
1000
Captcha Image