Apparatuur informatie

Combinova MFM 10 Level Meter
Fabrikant:
Combinova
Model: MFM 10
Datum:
Categorie: Meetinstrumenten
Groep: Level Meter
Beschrijving: Magnetic Field Meter
Informatie:

The MFM 10 is a compact, reliable and environmentally protected instrument to measure low frequency magnetic fields. When detecting and measuring magnetic fields it offers the following features: » Orthogonal coils, which means that fields can be measured independent of field direction. » A frequency range of 10 to 1,000Hz for all low frequency magnetic fields. » A wide dynamic range of 0.01 to 10,000μT with auto ranging, ensuring that the instrument is set at the optimum sensitivity for the detected field. » True RMS flux measurement, directional component and dominant frequency indication. » Polarization detection and presentation. For the operator in the field the designed portability of the MFM 10 means that the instrument is entirely self-contained. These features are: » Built-in rechargeable sealed lead batteries for portability and additionally avoiding Power supply interference. » A flexible measurement data logging facility, for up to 100 hours of measurements at frequent intervals. The stored results can later be printed out or transferred to a PC. » A complete set of accessories: transport case, tripod, battery charger, communication cable and this operator’s manual. » Fiber optic Interface kit for communication and remote control. The electronics in the instrument comprise analog amplifiers, a micro computer with communication peripherals and an alphanumerical LCD-display with back light. A built-in clock and calendar is used in the data logging measurement.

Deze handboeken zijn beschikbaar voor de bovengenoemde apparatuur:

Manueel de Type: Gebruikershandleiding Combinova-9136-Manual-Page-1-Picture
Pagina 's: 64
Grootte: 815.56 Kbytes (835134 Bytes)
Taal: Engels
Herziening: 2A
Handleiding-ID/Number:
Datum:
Kwaliteit: Elektronisch document, geen scan, zeer goed leesbaar.
Uploaden datum:
MD5: e448af5d6f7dcfcea8f603add1d6f63e
Downloads: 71 Sinds 03 augustus 2017
Informatie:

Section 1 - INTRODUCTION Magnetic Fields in the Environment The Instrument (Fig. 1.1) Using the MFM 10 Combinova AB - The Company Behind the Product Section 2 - UNPACKING AND INSPECTION Unpacking Inspection Checking the Battery Voltage Section 3 - OPERATING INSTRUCTIONS General Operation Measurement Data Retrieve Print Check Mode Parameters Battery Charging Section 4 - TECHNICAL DESCRIPTION Antenna Electronics Measurement Principle Printing with the MFM 10 Fiber Optic Remote Operation Fiber Adapter 10 Section 5 - SPECIFICATIONS Section 6 - ERROR CODES Instrument Errors Measurement Errors Data Retrieve Errors Print Errors

Combinova-9136-Manual-Page-1-Picture


Comments (0)

No comments yet. Be the first!

Add Comment

* Required information
1000
Captcha Image
Powered by Commentics