Apparatuur informatie

Good Will LCR-817 LCR Meter
Fabrikant:
Good Will
Model: LCR-817
Datum:
Categorie: Meetinstrumenten
Groep: LCR Meter
Beschrijving:
Informatie:

The precise LCR Meter series are automatic, user programmable instruments that provide high reliability and great precision for measuring a wide variety of impedance parameters. The frequency range of LCR-819/829 covers from 12Hz to 100kHz, LCR-817/827 from 12Hz to 10kHz, LCR-816/826 from 100Hz to 2kHz, and LCR-821 from 12Hz to 200kHz. The basic accuracy is 0.1% for LCR- 827/829/816/826, 0.05% for LCR-817/819/821. The measured results can be displayed on the high quality LCD monitor with decimal points and units. The measured result resolution is five full digits for Inductance (L), Capacitance (C), Resistance (R) and absolute value of impedance (|Z|) [four full digits for Dissipation factor (D), Quality factor (Q), R with C, R with L, 2 digits after decimal dot for phase angle (θ)]. In the meantime, the LCD monitor is also shown the control status and parameters of settings. The keypads are easy for menu programming. The LCR Meters’ test fixture (option) is a method of convenient, reliable, guarded 4-terminal/2 wires connection of radial and axial leaded components to the LCR Meters. Test conditions can be stored and recalled from internal memory that will reduce the setup time for measurement preparing.

Deze handboeken zijn beschikbaar voor de bovengenoemde apparatuur:

Manueel de Type: Gebruikershandleiding GoodWill-9022-Manual-Page-1-Picture
Pagina 's: 40
Grootte: 710.70 Kbytes (727758 Bytes)
Taal: Engels
Herziening:
Handleiding-ID/Number:
Datum:
Kwaliteit: Elektronisch document, geen scan, zeer goed leesbaar.
Uploaden datum:
MD5: 5b7be1d872d18f20b2abe2481e9b2779
Downloads: 451 Sinds 14 mei 2017
Informatie:

1. INTRODUCTION ... 1 2. 3. 4. PRECAUTIONS BEFORE OPERATION ... 2-1.Unpacking the instrument ... 2-2.Checking the Line Voltage ... 2-3.Environment ... 2-4.Equipment Installation and Operation ... PANEL DESCRIPTION ... OPERATION ... 4-1.Connects to DUT ... 4-2.Start-Up ... 4-3.Zeroing ... 4-4.Menu Functions ... 4-5.Measurement Conditions ... 2 2 2 3 3 4 8 8 8 8 11 18 5. SPECIFICATIONS ... 35 6. MESSAGE CODE ... 44 7. MAINTENANCE ... 45 7-1.Cleaning ... 45 7-2.Battery Replacement ... 45 7-3.Recall Calibration ... 46 8. OPTION 1 (BIN Function for LCR-826/827/829 only) ... 48 8-1. BIN Functions for Components Sorting ... 48 8-2. BIN Setting Conditions ... 50 8-3. BIN Range Setting: Component Sorting Range ... 56 9. OPTION 2 ... 9-1.On-line procedure ... 9-2.RS232 VIEWER Software Operation ... 9-3.The Configuration of Cable ...

GoodWill-9022-Manual-Page-1-Picture


Comments (0)

No comments yet. Be the first!

Add Comment

* Required information
1000
Captcha Image
Powered by Commentics