Equipment information
Wavetek 1062 Generator
Manufacturer:
Image 1 of 1
If you have any other photos or manuals for the
Wavetek 1062 you can upload the files here .
Model:
1062
Date:
Category:
Group:
Description:
Sweep Signal Generator
Information
The Wavetek 1060 Series is a family of rugged, low cost,
solid state sweep generators covering the frequency range of
1 to 400 MHz. The Models 1061 and 1062 are general purpose
sweep generators designed for a variety of applications,
while the Models 1066 and 1067 are designed primarily for
CATV use. Each unit features 20 dB PIN diode leveling and
remote programming of center frequency, sweep width, and
output level. Up to five crystal controlled marker modules
may be plugged into the unit. These modules are controlled
by convenient front panel ON/OFF switches. Marker amplitude
and width controls enable optimum adjustment
of the marker display. Additionally, an external marker
option can provide a marker by combining an external CW
source with a sample of the sweep Oscillator signal. Other
optional features include an adjustable Pilot Carrier Notch
control, and a sweep display Tilt control for use in CATV
applications.
The 1060 Series features modular plugin construction, which
allows optional features to be factory installed at the time
of purchase, or customer installed at a later date. This
concept offers protection against obsolescence since updated
and additional features can be easily and economically added
as new requirements dictate.
Manual Type:
Service and User Manual
Pages:
88
Size:
3.19 Mbytes (3344313 Bytes)
Language:
english
Revision:
Manual-ID:
Date:
Quality:
Scanned document, reading partly badly, partly not readable.
Upload date:
2017 01 02
MD5:
18f89711b6289ce40e9ce23d1b4564fa
Downloads:
2960
Information
This manual provides descriptive material and instructions
for the installation, operation, maintenance, and repair of
the Wavetek 1060 Series Sweep/Signal Generator.