Apparatuur informatie

Electronic Navigation Industries 1140LA Versterker
Fabrikant:
Model:
1140LA
Datum:
1995
Categorie:
Groep:
Omschrijving:
BROADBAND POWER AMPLIFIER

Informatie

The ENI Mode! 1140LA is an all solid-state Amplifier that has a flat frequency response from 9 kHz to 250 MHz with a gain of 55 dB. Its 50Ω input is compatible with any laboratory signal generator, function generator or integrated circuit Oscillator. Input and output impedances are 50Ω and the unit may be driven to full power output by most RF synthesizers, signal generators and swept signal sources. Output power from zero to more than 1500 W is continuously adjustable by varying the amplitude of the low-level input. Any load impedance (from an open to a short circuit) may be connected to the output of the 1140LA without fear of damage or oscillation. The unit provides maximum power transfer to a 50Ω load impedance; however, any load impedance between 40 to 60Ω can be driven with no reduction in power output. Gain is 55 dB nominal with variation of less than ±1.0 dB over the entire frequency range. It provides at least 600 W of saturated power from 4 kHz to 400 kHz. A built-in, true-average power meter measures both the power leaving the 1140LA (forward power) and the power absorbed by the load (load power). Extraordinary meter accuracy is provided by a unique computer circuit in the output. By adjusting the tuning (or frequency of the load) and observing the increase in load power, optimum match can be readily achieved. Complete with built-in Power Supply and cooling system, the 1140LA will operate from any 115 VAC line with a 35 A capacity. The 1140LA will deliver its rated power output into any load impedance regardless of match (up to 400 W of reflected power). Output RF voltage is displayed on the front panel meter. The 1140LA is packaged for bench mounting and is shipped with rack-mounting adaptors. The 1140LA will raise the power level of signal sources and generators without requiring tuning or bandswitching.

toon meer

Gebruikershandleiding
Handleidingen type:
Gebruikershandleiding
Pagina’s:
30
Grootte:
857.79 Kbytes (878376 Bytes)
Taal:
english
Herziening:
D1
Handleidingen-ID:
1140LA-TM
Datum:
Kwaliteit:
Gescand document alle leesbaar.
Upload datum:
25 januari 2016
MD5:
7c4d623259936d81f70b5100225b8c37
Downloads:
303

Informatie

General Information Introduction ... 1 Chapter 1 - Safety 1.1 Labels ... 1-1 1.1.1 Important Operating or Maintenance Cautions ... 1-1 1.1.2 Shock Hazard Warnings ... 1-1 1.1.3 Service ... 1-2 1.1.4 Nameplate ... 1-2 Chapter 2 - Installation and Operation 2.1 Initial Inspection ... 2-1 2.1.1 Mechanical Inspection ... 2-1 2.1.2 Claim for Damage ... 2-1 2.1.3 Packaging for Reshipment ... 2-1 2.2 Installation Requirements ... 2-2 2.2.1 Rack Installation ... 2-2 2.2.2 Mains Lead Connection ... 2-2 2.3 Operation ... 2-3 2.3.1 Initial Turn-on Procedure ... 2-3 2.3.2 Performance Check ... 2-4 2.4 Tuning the Load ... 2-5 Chapter 3 - Technical Description 3.1 General Description ... 3-1 Chapter 4 - Maintenance and Calibration 4.1 Periodic Maintenance ... 4-1 4.2 Assembly Description ... 4-1 4.2.1 Power Amplifier RS-8-4781 ... 4-1 4.2.2 Power Supply/Driver 1140U-4333 ... 4-1 4.2.3 Power Supply Regulator RS-16-4803 ... 4-2 4.2.4 Meter Control 1140LA-4333 ... 4-2 4.2.5 Output Combiner RS-16-4801 ... 4-2 4.3 Transistor Replacement ... 4-3 4.3.1 Component Removal ... 4-3 4.3.1.1 Cover Removal ... 4-3 4.3.1.2 Removal of Inverted “U” Assembly ... 4-3 4.3.1.3 Power Amplifier Heatsink Removal ... 4-3 4.3.1.4 Power Amplifier Module Removal ... 4-4 4.3.1.5 Replacement of RF Power Transistor ... 4-4 4.4 Troubleshooting ... 4-5 Appendix A - 1140LA Specifications Appendix B - Service Appendix is missing!!

toon meer

Add Comment

* Required information
1000
Captcha Image

Comments

No comments yet. Be the first!