Apparatuur informatie

California Instruments 800T Oscillator
Fabrikant:
Model:
800T
Datum:
Categorie:
Groep:
Omschrijving:
Variable Frequency Oscillator

Informatie

The California Instruments 800T Series of Variable Frequency Oscillator provide a pure sine wave output for driving the California Instruments Solid State Invertrons, These oscillators incorporate a unique amplitude regulator circuit which prevents amplitude overshoot as the frequency of the Oscillator is varied or as the decade range of the Oscillator is changed This prevents possible damage to a sensitive load connected to the output of the Invertron as a result of excessive output voltage amplitude. The multi-phase versions of the 800T Series Oscillators are used to drive two or more Solid State Invertrons connected so as to provide either two phase or three phase power.

toon meer

Service-en gebruikershandleiding
Handleidingen type:
Service-en gebruikershandleiding
Pagina’s:
102
Grootte:
2.85 Mbytes (2983404 Bytes)
Taal:
english
Herziening:
Handleidingen-ID:
Datum:
Kwaliteit:
Gescande document, lezen deels slecht, deels niet leesbaar.
Upload datum:
20 december 2015
MD5:
e09c5868eb9eab6c2a039131aff6edd0
Downloads:
455

Informatie

GENERAL DESCRIPTION 1. 1 INTRODUCTION 1.2 MODEL· NUMBER DESCRIPTION 1.3 GENERAL DESCRIPTION Π i 1.4 ACCESSORY EQUIPMENT ;... INSTALLATION AND OPERATION P ' 2.1 UNPACKING L 2.2 POWER REQUIREMENTS 2. 3 FUSE REQUIREMENTS ; 2.4 ACCEPTANCE TEST PROCEDURE 2. 5 MECHANICAL INSTALLATION and ; WIRING i 2. 6 OPERATING CONTROLS THEORY OF OPERATION 3. 1 DESCRIPTION OF SINGLE PHASE OSCILLATOR 3. 2 GENERAL DESCRIPTION OF SINGLE PHASE TO MULTIPHASE CONVERTER TEST PROCEDURE 4. 1 GENERAL 4. 2 TEST EQUIPMENT 4. 3 ACCURACY OF THE FREQUENCY DIAL CALIBRATION and FREQUENCY STABILITY 4» 4 OUTPUT VOLTAGE and AMPLITUDE STABILITY 4. 5 HARMONIC DISTORTION 4. 6 PHASE ACCURACY CALIBRATION PROCEDURE 5. 1 GENERAL 5. 2 TEST EQUIPMENT REQUIRED 5. 3 MECHANICAL ADJUSTMENT PROCEDURE for CALIBRATED FREQUENCY DIAL 5. 4 INITIAL CALIBRATION PROCEDURE for WIEN BRIDGE OSCILLATOR 5. 5 EXACT FREQUENCY CALIBRATION PROCEDURE for WIEN BRIDGE OSCILLATOR ON 20 Hz to 200 Hz RANGE 5. 6 EXACT FREQUENCY CALIBRATION PROCEDURE for WIEN BRIDGE OSCILLATOR ON 200 Hz to 2 KHz RANGE 5.7 EXACT FREQUENCY CALIBRATION PROCEDURE for WIEN BRIDGE OSCILLATOR ON 2 KHz to 20 KHz RANGE 5. 8 FREQUENCY RESPONSE ADJUSTMENTS 5. 9 ABSOLUTE AC OUTPUT VOLTAGE and HARMONIC DISTORTION 5. 10 PHASE ADJUSTMENTS FOR MODEL 800T-20 / 20K~ 1-20 TWO PHASE OSCILLATOR 5. 11 PHASE ADJUSTMENTS FOR MODEL 800T ~ 20 / 2OK - 1 - 3ψΌ THREE PHASE, OPEN Delta OSCILLATOR 5. 12 PHASE ADJUSTMENTS FOR MODEL 800T-20 / 2OK - 1-39 THREE PHASE OSCILLATOR MAINTENANCE AND TROUBLESHOOTING 6. 1 GENERAL 6. 2 TROUBLESHOOTING CIRCUIT DIAGRAMS 7, 1 GENERAL 7. 2 REFERENCE DESIGNATIONS REPLACEABLE PARTS 8. 1 GENERAL 8. 2 ORDERING INFORMATION PARTS LIST APPENDIX A CODE LIST OF MANUFACTURERS

toon meer

Add Comment

* Required information
1000
Captcha Image

Comments

No comments yet. Be the first!