Equipment information
Precision Electronics 201A Signal Analyzer
Manufacturer:
No picture available!
Maybe you can upload a pic for the
Precision Electronics 201A ?
If you have any other manuals for the
Precision Electronics 201A you can upload the files here .
Model:
201A
Date:
Category:
Group:
Description:
Signal Tracer
Information
Model 251A Deluxe Signal Tracer
Reference Data,
Power requirements.
105-125v AC cps,
Power consumption 55 watts.
Isolation
1. Specially designed electrostatically shielded power
transformer isolates unit from AC line for safe use on AC-DC
equipment,
C. Input impedance,
1. Probe is 4. megohms shunted by 2mmf. at low frequenoie
The input resistance decreases with increasing frequen cy
caused by dielectric losses.
2, Audio input impedance is £ meg. on xlOO position, and .25
meg, on xl,
D, Frequency response,
1. Probe from 20 cps, to over JOOmc,
Note: When Probe is used on audio frequencies a slight
signal distortion in speaker is normal.
2. Audio inputs from 20 cps. to over 20,000 cps.
E* Rosponse characteristics.
1. Audio input to meter xl position flat within ,1 of on*
db. from $0 cps. to 20,000 cps,
2. In xlOO position plus or minus db. from 50 ops • to
10,000 cps,
5. Probe flat within 1 db. from 20,000 cps. to 100 me.
approx. Above 100 me. the curve depends on the resonance of
the ground lead circuit tuned by its length,
F. Sensitivity,
1. Probe is li microvolts for full scale deflection,
G. Tvtbe complement.
1. 6AQ6/6AT6 high gain triode in probe, 6SJ7 pentode
amplifier, 6k6gT power output, 0SN7OT VTVM, 0X5GT reotifier,
2. Standard tubes may be used for replacement.
Manual Type:
Service and User Manual
Pages:
17
Size:
960.99 Kbytes (984056 Bytes)
Language:
english
Revision:
Manual-ID:
Date:
Quality:
Scanned document, reading partly badly, partly not readable.
Upload date:
2015 03 07
MD5:
7c7321b9774a8a9dbae11fcd07640e26
Downloads:
910