Equipment information

Wavetek 9100 Calibrator
Manufacturer:
Model:
9100
Date:
1994
Category:
Group:
Description:
Universal Calibration System

Information

Model 9100 — the world’s best value multi-product Calibrator ◆ Calibrates Over 15 Different Categories of General-Purpose Test Equipment ◆ Options for Power Meter, Insulation / Continuity Tester and Oscilloscope Calibration — Internally Installed and Retrofittable ◆ Semi-Automated and Fully Automated Procedure Modes for Maximum Calibration Throughput ◆ Fully Supported by Portocal-II/9010 Calibration Software and Procedure Libraries (updates via the World Wide Web from www.wavetek.com) ◆ Rapid Return on Investment ◆ Zero-Downtime Support Using Wavetek’s Model 4950 MTS ◆ Intuitive Front Panel Operation for Ease of Use Unmatched Workload Coverage If less to you’re calibrate and constantly less, more Wavetek’s and being more Model asked with 9100 Calibration System is the answer you’ve been waiting for. Its exceptional performance in both the analog and digital domain allows it to calibrate an extremely wide range of test and measurement equipment – quickly, efficiently and to ISO9000 requirements. For the Model 9100, calibrating everything from handheld digital multimeters to high performance digital-storage oscilloscopes is all part of a day’s work. Take advantage of the Model 9100’s unique procedure mode, which guides operators step-by-step through the entire calibration process, and you’ll not only calibrate more with less – you’ll do it faster. The Model 9100 is a multi- function Calibrator with a breadth and depth of outputs never before available from a single calibration source. In addition to DC and AC Voltage to 1050V, variable Resistance to 400MΩ and DC and AC Current to 20A (1000A via the optional current coils), the Model 9100 delivers continuously variable Capacitance values to 40mF and Conductance values to 2.5 milli Siemens. It also generates digitally synthesized and phase- locked Sine, Square, Triangle, Impulse and Trapezoidal waveforms, variable amplitude Pulses to 10MHz, Pulse Widths to 2 seconds, and Duty Cycles between 0.05% and 99.95%. Add one of the two Oscilloscope calibration options and it generates all the waveforms required to calibrate oscilloscopes up to 250MHz or 600MHz. Fit the insulation/continuity tester option and it synthesizes resistance values as high as 2GΩ at test voltages up to 1000V. Fit the power meter option and it simultaneously generates variable phase angle voltages and currents that allow you to calibrate power meters up to 1MW or 1MVAR. No other multi-product Calibrator gives you such wide workload coverage and versatility. Weighing in at only 41 lbs (18.5kg), it’s also the ideal solution to on-site calibration.

show more

User Manual
Manual Type:
User Manual
Pages:
86
Size:
1.40 Mbytes (1467722 Bytes)
Language:
english
Revision:
3
Manual-ID:
850299
Date:
1995 08 01
Quality:
Scanned document, all readable.
Upload date:
2018 08 15
MD5:
506faa9133d834fcb8c59eaff863f8c6
Downloads:
864

Information

Section 1 introduction Section 2 Interconnections Section 3 DC Voltage Section 4 AC Voltage Section 5 DC Current Section 6 AC Current Section 7 Resistance Section 8 Conductance Section 9 Frequency Section 10 Mark/Period Section 11 % Duty Section 12 Auxiliary Functions Section 13 Capacitance Section 14 Temperature — Thermocouple Section 15 Temperature —- RTD Section 16 Logic Pulses Section 17 Logic Levels Section 18 Error Messages

show more

User Manual
Manual Type:
User Manual
Pages:
168
Size:
22.45 Mbytes (23537459 Bytes)
Language:
english
Revision:
Issue 4.0
Manual-ID:
850306
Date:
Quality:
Electronic document, no scan, very well readable.
Upload date:
2014 11 09
MD5:
582b8a5bd10ed7bcc9fd9bcf77cb1586
Downloads:
1012

Information

User's Handbook Volume 3 Option 250: 250MHz Oscilloscope Calibration Module Option 600: 600MHz Oscilloscope Calibration Module Operation and Performance Volume 3 — Model 9100 Universal Calibration System (This Volume) Option 250: 250MHz Oscilloscope Calibration Module Option 600: 600MHz Oscilloscope Calibration Module Operation and Performance Section 11 Options 250 & 600: 250MHz and 600MHz Oscilloscope Calibration Module Page 11.1 About Section 1 ... 11-1 11.2 Introduction to Options 250 and 600 ... 11-2 11.2.1 Functions ... 11-2 11.2.2 Operating Modes ... 11-3 11.2.2 System Operation ... 11-3 11.3 Associated Products ... 11-4 11.4 UUT Calibration Procedure Library ... 11-4 11.5 Printer Support ... 11-4 11.6 UUT Calibration Certificates ... 11-5 11.6.1 Procedure Mode Results Printouts ... 11-5 11.7 Inventory Management ... 11-5 11.8 Documentation ... 11-5 Section 12 Installing Option 250 or 600 Page 12.1 About Section 12 ... 12-1 12.2 Oscilloscope Connections ... 12-1 12.2.1 SIGOUT ... 12-1 12.2.2 TRIG OUT ... 12-2 12.2.3 50Ω Terminations ... 12-2 12.2.4 50Ω T-Connector and Extra Cables ... 12-2 Section 13 Options 250 and 600 Controls Page 13.1 About Section 13 ... 13-1 Section 14 Using Options 250 and 600 — Manual Mode Page 14.1 About Section 14 ... 14.1-1 14.2 Interconnections ... 14.2-1 14.2.1 Introduction ... 14.2-1 14.2.2 External Interconnections ... 14.2-1 14.2.3 UUT Oscilloscope Signal ... 14.2-1 14.2.4 UUT Oscilloscope Trigger ... 14.2-2 14.3 'Auxiliary' Oscilloscope Functions ... 14.2-1 14.3.1 Introduction ... 14.3-1 14.3.2 Selection of Auxiliary and Oscilloscope Functions ... 14.3-2 14.3.3 Screen Keys — Function Selection ... 14.3-3 0-2 14.4 Square Function ... 14.4-1 14.4.1 Introduction and Topic List ... 14.4-1 14.4.2 Auxiliary and Oscilloscope Functions Selection ... 14.4-2 14.4.3 Square Function — Default Screen ... 14.4-2 14.4.4 Screen Keys ... 14.4-3 14.4.5 Value Editing ... 14.4-4 14.4.6 Using the 9100 Square Function to Calibrate the Amplitude Response of a UUT Oscilloscope ... 14.4-6 14.5 DC Function ... 14.5-1 14.5.1 Introduction and Topic List ... 14.5-1 14.5.2 Auxiliary and Oscilloscope Functions Selection ... 14.5-2 14.5.3 DC Function — Default Screen ... 14.5-2 14.5.4 Screen Keys ... 14.5-3 14.5.5 Value Editing ... 14.5-4 14.5.6 Using the 9100 DC Function to Calibrate the DC-Coupled Amplitude Response of a UUT Oscilloscope ... 14.5-6 14.6 Sine Function ... 14.6-1 14.6.1 Introduction and Topic List ... 14.6-1 14.6.2 Auxiliary and Oscilloscope Functions Selection ... 14.6-2 14.6.3 Sine Function — Default Screen ... 14.6-2 14.6.4 Screen Keys ... 14.6-3 14.6.5 Value Editing ... 14.6-5 14.6.6 Using the 9100 Sine Function to Calibrate the Flatness/Bandwidth of a UUT Oscilloscope ... 14.6-8 14.7 Edge Function ... 14.7-1 14.7.1 Introduction and Topic List ... 14.7-1 14.7.2 Auxiliary and Oscilloscope Functions Selection ... 14.7-2 14.7.3 Edge Function — Default Screen ... 14.7-2 14.7.4 Screen Keys ... 14.7-3 14.7.5 Value Editing ... 14.7-5 14.7.6 Using the 9100 Edge Function to Calibrate the Pulse Response of a UUT Oscilloscope ... 14.7-8 14.8 Markers Function ... 14.8-1 14.8.1 Introduction and Topic List ... 14.8-1 14.8.2 Auxiliary and Oscilloscope Functions Selection ... 14.8-2 14.8.3 Markers Function — Default Screen ... 14.8-2 14.8.4 Screen Keys ... 14.8-3 14.8.5 Value Editing ... 14.8-5 14.8.6 Trigger Timing Relationship ... 14.8-7 14.8.7 Using the 9100 Markers Function to Calibrate the Time Base of a UUT Oscilloscope ... 14.8-8 Section 15 Using the Model 9100 — Procedure Mode 15.1 About Section 15 ... 15-1 16.2 9100 Options 250 and 600 — SCPI Language - Commands and Syntax ... 16-2 16.2.1 Introduction ... 16-2 16.2.2 CALibration Subsystem ... 16-3 16.2.3 OUTPut Subsystem ... 16-3 16.2.4 SOURce Subsystem ... 16-4 Section 17 Options 250 and 600 Specifications Page 17.1 General ... 17-1 17.2 Products Provided with the Options 250 and 600 to the Model 9100 ... 17-1 17.3 Square Function Specifications ... 17-2 17.4 DC Function Specifications ... 17-2 17.5 Sine Function Specifications ... 17-3 17.6 Edge Function Specifications ... 17-4 17.7 Markers Function Specifications ... 17-5 17.8 Trigger Out Specifications ... 17-6 Section 18 Options 250 and 600 — Routine Maintenance and Test Page 18.1 About Section 18 ... 18-1 18.2 9100 Options 250 and 600 Routine Maintenance and Repair ... 18-1 18.3 Model 9100 Options 250 and 600 Test and Selftest ... 18-1 App. A: Error Reporting System — Additional Codes for Options 250 and 600 ... 18-A1 Section 19 Verifying the Model 9100 Options 250 and 600 Specification Page 19.1 About Section 19 ... 19-1 19.2 Need for Verification ... 19-1 19.3 Equipment Requirements ... 19-2 19.4 Interconnections ... 19-2 19.5 Verification Points ... 19-2 19.6 Calculating Absolute Specification Limits ... 19-3 19.7 Verification Procedure ... 19-3 19.8 Options 250 and 600 Verification by Functions — Topic List ... 19-4 19.8.1 Verifying the Edge Function ... 19-5 19.8.2 Verifying the DC Function ... 19-11 19.8.3 Verifying the Square Function ... 19-15 19.8.4 Verifying the Markers Function ... 19-19 19.8.5 Verifying the Sine Function ... 19-22 Section 20 Calibrating the Model 9100 Options 250 and 600 Page 20.1 About Section 20 ... 20.1-1 20.2 Front Panel Calibration by Functions ... 20.2-1 20.2.1 Introduction and Topic List ... 20.2-1 20.2.2 Summary of Calibration Process ... 20.2-2 20.2.3 Edge Function Calibration ... 20.2-3 20.2.4 DC Function Calibration ... 20.2-7 20.2.5 Square Function Calibration ... 20.2-11 20.2.6 Sine Function LF Calibration ... 20.2-15 20.2.7 Sine Function HF Linearity Calibration ... 20.2-19 20.2.8 Sine Function HF Flatness Calibration ... 20.2-25

show more

User Manual
Manual Type:
User Manual
Pages:
275
Size:
897.26 Kbytes (918795 Bytes)
Language:
english
Revision:
Issue 8.0
Manual-ID:
850301
Date:
Quality:
Electronic document, no scan, very well readable.
Upload date:
2014 11 09
MD5:
694aa36ec0682dd8a3d32e6b40e1925b
Downloads:
667

Information

User's Handbook Volume 2 — Performance (for Introduction, Installation, Controls (with Tutorial), Manual Mode and Procedure Mode refer to Volume 1 — Operation) (for Options 250 and 600 refer to Volume 3 — Operation and Performance) Volume 2 — Performance (This Volume) Section 6 Remote Interfaces 6.1 About Section 6 ... 6-1 6.2 Index of IEEE-488.2 and SCPI Codes used in the Model 9100 ... 6-2 6.3 Introduction ... 6-4 6.4 Using the Model 9100 in a System ... 6-8 6.5 Retrieval of Device Status Information ... 6-15 6.6 Model 9100 SCPI Language - Commands and Syntax ... 6-24 6.7 The IEEE Bus Interface for the Power Option ... 6-58 Section 6 Appendix A: IEEE 488.2 Device Documentation Requirements ... 6-A1 Section 6 Appendix B: SCPI Conformance Information ... 6-B1 Section 6 Appendix C: IEEE 488.2 Common Commands and Queries Implemented in the Model 9100 ... 6-C1 Section 6 Appendix D: Model 9100 — Device Settings after *RST ... 6-D1 Section 6 Appendix E: Model 9100 — Device Settings at Power On ... 6-E1 Section 7 Model 9100 Specifications 7.1 General ... 7-1 7.2 Options and Associated Products ... 7-2 7.3 DC Voltage Specifications ... 7-3 7.4 AC Voltage Specifications ... 7-4 7.5 DC Current Specifications ... 7-8 7.6 AC Current Specifications ... 7-9 7.7 Resistance Specifications ... 7-14 7.8 Conductance Specifications ... 7-15 7.9 Frequency Function Specifications ... 7-16 7.10 Mark/Period Function Specifications ... 7-17 7.11 % Duty Cycle Function Specifications ... 7-18 7.12 Auxiliary Functions - Specifications ... 7-19 7-13 Capacitance Specifications ... 7-20 7.14 Thermocouple Temperature Specifications ... 7-21 7.15 RTD Temperature Specifications ... 7-22 7.16 Logic-Pulses Function Specifications ... 7-23 7.17 Logic-Levels Function Specifications ... 7-24 7.18 Insulation/Continuity Specifications ... 7-25 7.19 Power Specifications ... 7.27 Section 8 Model 9100 — Routine Maintenance and Test 8.1 About Section 8 ... 8-1 8.2 Routine Maintenance ... 8-2 8.3 Model 9100 Test and Selftest ... 8-10 8.4 Printing Selftest Results ... 8-26 Section 8 Appendix A Error Reporting Subsystem ... 8-A1 Section 9 Model 9100 — Specification Verification 9.1 About Section 9 ... 9-1 9.2 The Need for Verification ... 9-1 9.3 Equipment Requirements ... 9-2 9.4 Interconnections ... 9-2 9.5 Verification Points ... 9-3 9.6 Calculating Absolute Specification Limits ... 9-4 Section 10 Model 9100 — Calibration 10.1 About Section 10 ... 10.1-1 10.2 The Model 9100 Calibration Mode ... 10.2-1 10.2.1 Introduction ... 10.2-1 10.2.2 Mode Selection ... 10.2-2 10.2.3 Selection of Calibration Mode ... 10.2-2 10.2.4 Special Calibration ... 10.2-5 10.2.5 Cold Junction Calibration ... 10.2-8 10.2.6 Standard Calibration ... 10.2-12 10.2.7 Overview of Calibration Operations ... 10.2-14 10.3 Standard Calibration — Basic Sequences ... 10.3-1 10.3.1 Introduction ... 10.3-2 10.3.2 Selecting Hardware Configurations ... 10.3-4 10.3.3 Selecting Target Calibration Values ... 10.3-5 10.3.4 Calibrating the Model 9100 at Target Values ... 10.3-9 10.3.5 Standard Calibration of AC Functions ... 10.3-13 10.4 Front Panel Calibration by Functions ... 10.4-1 10.4.1 Introduction ... 10.4-1 10.4.2 Summary of Calibration Process ... 10.4-2 10.4.3 DC Voltage Calibration ... 10.4-6 10.4.4 AC Voltage Calibration ... 10.4-14 10.4.5 DC Current Calibration ... 10.4-20 10.4.6 AC Current Calibration ... 10.4-28 10.4.7 Resistance Calibration ... 10.4-36 10.4.8 Capacitance Calibration ... 10.4-45 10.4.9 Insulation Resistance Calibration ... 10.4-51 10.4.10 Continuity Calibration ... 10.4-57 10.5 Remote Calibration of the Model 9100 via the IEEE 488 Interface ... 10.5-1 10.5.1 The Model 4950 MTS System ... 10.5-1

show more

User Manual
Manual Type:
User Manual
Pages:
387
Size:
1.88 Mbytes (1972038 Bytes)
Language:
english
Revision:
Issue 8.0
Manual-ID:
850300
Date:
Quality:
Electronic document, no scan, very well readable.
Upload date:
2014 11 09
MD5:
798bc61908d8764b0c7328204306192c
Downloads:
1120

Information

User's Handbook Volume 1 — Operation (for Remote Operation, Instrument Specification, Specification Verification, Routine Maintenance and Calibration refer to Volume 2 — Performance) Contents Volume 1 — Operation (This Volume) Section 1 The Model 9100 Multifunction Calibrator 1.1 About Section 1 ... 1-1 1.2 Introduction to the Model 9100 ... 1-2 1.3 Model 9100 Options and Associated Products ... 1-6 1.4 UUT Calibration Procedure Library ... 1-7 1.5 Printer Support ... 1-8 1.6 UUT Calibration Certificates ... 1-8 1.7 Inventory Manaagement ... 1-8 1.8 Documentation ... 1-8 Section 2 Installing the Model 9100 2.1 About Section 2 ... 2-1 2.2 Lifting and Carrying the Model 9100 ... 2-2 2.3 Unpacking and Inspection ... 2-2 2.4 Storage ... 2-3 2.5 Preparation for Shipment ... 2-3 2.6 Calibration Enable Switch ... 2-3 2.7 Preparation for Operation ... 2-4 2.8 Connectors and Pin Designations ... 2-10 Section 3 Model 9100 Controls 3.1 About Section 3 ... 3-1 3.2 Introduction to the Front Panel ... 3-2 3.3 Modes of Operation ... 3-4 3.3.1 Mode Selection ... 3-4 3.3.2 Configuration Mode ... 3-6 3.4 Working with Front Panel Controls — Tutorials ... 3-32 Section 4 Using the Model 9100 — Manual Mode 4.1 About Section 4 ... 4.1-1 4.2 Interconnections ... 4.2-1 Functions: 4.3 DC Voltage ... 4.3-1 4.4 AC Voltage ... 4.4-1 4.5 DC Current ... 4.5-1 4.6 AC Current ... 4.6-1 4.7 Resistance ... 4.7-1 4.8 Conductance ... 4.8-1 4.9 Frequency ... 4.9-1 4.10 Mark/Period ... 4.10-1 4.11 % Duty ... 4.11-1 4.12 Auxiliary Functions ... 4.12-1 4.13 Capacitance ... 4.13-1 4.14 Thermocouple Temperature ... 4.14-1 4.15 RTD Temperature ... 4.15-1 4.16 Logic-Pulses ... 4.16-1 4.17 Logic-Levels ... 4.17-1 4.18 Insulation/Continuity ... 4.18-1 4.19 DC Power ... 4.19-1 4.20 AC Power ... 4.20-1 4.21 AC Harmonics ... 4.21-1 Section 5 Using the Model 9100 — Procedure Mode 5.1 About Section 5 ... 5.1-1 5.2 Procedure Mode — Safety and General Notes ... 5.2-1 5.3 Procedure Mode — Access Guide ... 5.3-1 5.4 Procedure Mode — 'Adjustment Only' Procedure ... 5.4-1 5.5 Procedure Mode — '1 Year Verification' & 'ISO9000 Verify' Procedures ... 5.5-1 5.6 Procedure Mode — 'Verify Pass/Fail' & 'ISO9000 Pass/Fail' Procedures ... 5.6-1

show more

User Manual
Manual Type:
User Manual
Pages:
362
Size:
11.90 Mbytes (12476765 Bytes)
Language:
english
Revision:
8
Manual-ID:
850300
Date:
1998 06 01
Quality:
Scanned document, all readable.
Upload date:
2018 08 15
MD5:
9259d054ad066f993dc8c9f9a15013d9
Downloads:
694

Information

User's Handbook Volume 1 -- Operation

show more

User Manual
Manual Type:
User Manual
Pages:
264
Size:
8.66 Mbytes (9077328 Bytes)
Language:
english
Revision:
8
Manual-ID:
850301
Date:
1998 06 01
Quality:
Scanned document, all readable.
Upload date:
2018 08 15
MD5:
b29e8811520dad1be2b4972cde2ab041
Downloads:
842

Information

User's Handbook Volume 2 -- Performance Section 1 The Model 9100 Multifunction Calibrator See Volume 1 - Operation Section 2 Installing the Model 9100 See Volume 1 - Operation Section 3 Model 9100 Controls See Volume 1 - Operation Section 4 Using the Model 9100 — Manual Mode See Volume 1 - Operation Section 5 Using the Model 9100 — Procedure Mode See Volume 1 - Operatio Volume 2 — Performance (This Volume) Section 6 Remote Interfaces 6.1 About Section 6 ... 6-1 6.2 Index of EEE-488,2 and SCPI Codes used in the Model 9100 ... 6-2 6.3 Introduction ... 6-4 6.4 Using the Model 9100 in a System ... 6-8 6.5 Retrieval of Device Status Information ... 6-15 6.6 Model 9100 SCPI Language - Commands and Syntax ... 6-24 6.7 The IEEE Bus Interface for the Power Option ... 6-58 Section 6 Appendix A: IEEE 488.2 Device Documentation Requirements ... 6-A1 Section 6 Appendix B: SCPI Conformance Information ... 6-B1 Section 6 Appendix C: IEEE 488.2 Common Commands and Queries Implemented in the Model 9100 ... 6-C1 Section 6 Appendix D; Model 9100 — Device Settings after *RST ... 6-D1 Section 6 Appendix E: Model 9100 — Device Settings at Power On ... 6-E1 Section 7 Mode! 9100 Specifications 7.1 General ... 7-1 7.2 Options and Associated Products ... 7-2 7.3 DC Voltage Specifications ... 7-3 7.4 AC Voltage Specifications ... 7-4 7.5 DC Current Specifications ... 7-8 7.6 AC Current Specifications ... 7-9 7.7 Resistance Specifications ... 7-14 7.8 Conductance Specifications ... 7-15 7.9 Frequency Function Specifications ... 7-16 7.10 Mark/Period Function Specifications ... 7-17 7.11 % Duty Cycle Function Specifications ... 7-18 7.12 Auxiliary Functions - Specifications ... 7-19 7-13 Capacitance Specifications ... 7-20 7.14 Thermocouple Temperature Specifications ... 7-21 7.15 RID Temperature Specifications ... 7-22 7.16 Logic-Pulses Function Specifications ... 7-23 7.17 Logic-Levets Function Specifications ... 7-24 7.18 Insulation/Continuity Specifications ... 7-25 7.19 Power Specifications ... 7.27 Section 8 Model 9100 — Routine Maintenance and Test 8.1 About Section 8 ... 8.2 Routine Maintenance ... 8.3 Model 9100 Test and Selftest ... 8.4 Printing Seiftest Results ... Section 8 Appendix A Error Reporting Subsystem ... Section 9 Model 9100 — Specification Verification 9.1 About Section 9 ... 9.2 The Need for Verification ... 9.3 Equipment Requirements ... 9.4 Interconnections ... 9.5 Verification Points ... 9.6 Calculating Absolute Specification Limits ... Section 10 Model 9100 — Calibration 10.1 About Section 10 ... 10.2 The Mode! 9100 Calibration Mode ... 10.2.1 introduction ... 10.2.2 Mode Selection ... 10.2.3 Selection of Calibration Mode ... 10.2.4 Special Calibration ... 10.2.5 Cold Junction Calibration ... 10.2.6 Standard Calibration ... 10.2.7 Overview of Calibration Operations ... 10.3 Standard Calibration — Basic Sequences ... 10.3.1 Introduction ... 10.3.2 Selecting Hardware Configurations ... 10.3.3 Selecting Target Calibration Values ... 10.3.4 Calibrating the Model 9100 at Target Values ... 10.3.5 Standard Calibration of AC Functions ... 10.4 Front Panel Calibration by Functions ... 10.4.1 Introduction ... 10.4.2 Summary of Calibration Process ... 10.4.3 DC Voltage Calibration ... 10.4.4 AC Voltage Calibration ... 10.4.5 DC Current Calibration ... 10.4.6 AC Current Calibration ... 10.4.7 Resistance Calibration ... 10.4.8 Capacitance Calibration ... 10.4.9 Insulation Resistance Calibration ... 10.4.10 Continuity Calibration ... 10.5 Remote Calibration of the Model 9100 via the IEEE 488 Interface 10.5.1 The Mode! 4950 MTS System ...

show more

User Manual
Manual Type:
User Manual
Pages:
86
Size:
277.15 Kbytes (283803 Bytes)
Language:
english
Revision:
Issue 3
Manual-ID:
850299
Date:
Quality:
Scanned document, all readable.
Upload date:
2014 11 09
MD5:
b499585b5357e108c37422498b065235
Downloads:
778

Information

OPERATOR'S GUIDE (for operating, performance and maintenance details refer to the User's Handbook) Section 1 Introduction Section 2 Interconnections Section 3 DC Voltage Section 4 AC Voltage Section 5 DC Current Section 6 AC Current Section 7 Resistance Section 8 Conductance Section 9 Frequency Section 10 Mark/Period Section 11 % Duty Section 12 Auxiliary Functions Section 13 Capacitance Section 14 Temperature — Thermocouple Section 15 Temperature — RTD Section 16 Logic Pulses Section 17 Logic Levels Section 18 Error Messages

show more