Equipment information
Hewlett Packard 8970A Level Meter
Manufacturer:
Image 1 of 1
If you have any other photos or manuals for the
Hewlett Packard 8970A you can upload the files here .
Model:
8970A
Date:
1985
Category:
Group:
Description:
Noise Figure Meter
Information
The 8970A Noise Figure Meter is a very sensitive, tunable,
automatic receiver. Its capability is greatly enhanced by a
microprocessor used for many control, timing, and
calculation purposes. With an appropriate solid state noise
source, such as the 346B Noise Source, it automatically
measures the noise figure of the device under test (DUT)
inserted between the output of the noise source and the
input of the 8970A. The 8970A may be tuned to any frequency
between 10 and 1500 MHz and digitally swept over all or part
of this range. To measure DUT’s with output frequencies
greater than 1500 M Hz, an external mixer and local
Oscillator (LO) are required to down convert the frequency
into the 10 to 1500 M Hz range. The 8970A can also
automatically remove the noise contribution of the second
stage (the measurement system) from the measurement. It can
measure and display both gain and noise figure of the DUT.
Manual Type:
User Manual
Pages:
44
Size:
73.29 Mbytes (76853344 Bytes)
Language:
english
Revision:
Manual-ID:
Date:
Quality:
Scanned document, all readable.
Upload date:
2013 11 26
MD5:
59f7918de596450c90df2b7eeb71fb22
Downloads:
1142
Information
Applications and Operation
Manual Type:
Service and User Manual
Pages:
513
Size:
28.95 Mbytes (30358853 Bytes)
Language:
english
Revision:
Manual-ID:
08970-90014
Date:
Quality:
Scanned document, reading partly badly, partly not readable.
Upload date:
2013 12 08
MD5:
d3f54ab2a972b7cf8f8772d3d649fd24
Downloads:
859
Information
This manual applies directly to instruments with serial
numbers prefixed 2438A.
With the changes described in Section VII, this manual also
applies to instruments with serial numbers 2116A, 2210A,
2222A, 2303A, and 2414A.
For additional important information about serial numbers,
see INSTRUMENTS COVERED BY MANUAL in Section I.