Equipment information

Whirlpool ADG 7340 Dish washer
Manufacturer:
Model:
ADG 7340
Date:
2004
Category:
Group:
Description:
Dishwasher integratable

Information

Technical data Dimension Height 82.0 - 87.0cm Width 59.7 cm Depth 55.5 cm Weight 50 kg Wooden door for Full Door appliances Thickness min. 16 mm Thickness max. 20 mm Width min. 592 mm Width max. 595 mm Height min. 620 mm Height max. 718 mm Weight min. 2.5 kg Weight max. 6.5 kg Max. stick out over lower edge of appliance door 92 mm Height of plinth min. 93 mm Electronic boards Service boards see spare part list Serial boards see on the boards itself Programmed control board and programing of version , see „Board Service“ and „DATA“ on rating plate of inner door: UCB 469313 Data set 469303 Basic UCB, not programmed see on the board itself 4619 724 91611 Succession of programs Programs see program diagram Succession P1a-P3b-P7a Datas Energy Label Reference program P5b Energy Performance B Cleaning Performance A Drying Performance C Program information Start indicator All programs will be locked after start. Changing the program or finishing the program will be possible only after pressing the start button for longer then 1.5 sec. (Break by customer) A switching off the appliance or unplug the appliance for a while, this will frozen the program step and later on, the program continuos on the same position. Exception: Switching off the appliance or unplug the appliance during the drying phase, this will lead directly to the end of the program. Water Volume at permanent spray system Water Volume Level Regeneration 0.3 l 15 mm Back rinse 3x 1.0 l 60 mm Prewash 4.8 l 120 mm Main wash 4.2 l 118 mm Intermediate rinse 1 4.2 l 118 mm Intermediate rinse 2 4.2 l 118 mm Clear rinse 4.2 l 118 mm Safety/ overflow 8.5 l 141 mm Measuring the level Remove the coarse sieve, put in a measuring meter into the sump, measure the hight of the water level. Detergent max. Pre-wash 10 cm3 Main-wash 40 cm3 Rinse aid 135 cm3 6 Dosage steps 1 - 6 ml Water softener Saltcontainer 2 kg Resin container 700 cm3 Regeneration dosage 300 cm3 Water pressure Inlet pressure 0.3 - 10 bar Spray pump pressure 0.3 bar Rotations Spray pump motor 2800 RPM Drain pump motor 3000 RPM Spray arm lower 30 - 40 RPM Spray arm upper 30 - 40 RPM

show more

Service Manual
Manual Type:
Service Manual
Pages:
16
Size:
345.20 Kbytes (353480 Bytes)
Language:
english
Revision:
Manual-ID:
4812 718 19815
Date:
2004 04 26
Quality:
Electronic document, no scan, very well readable.
Upload date:
2013 10 03
MD5:
6e558a07920cc6db13fe09f203c7f667
Downloads:
3025

Information

This documentation is only intended for qualified technicians who are aware of the respective safety regulations. Technical data 2 - 4 Spare part list 5 - 6 Exploded view 7 - 8 Circuit diagram 9 Program diagram 10 Text/Legend 11 - 16

show more