Tektronix 3026 Analizzatore di spettro
Nessuna immagine disponibile!
Forse puoi caricare una foto per la
Se avete altri manuali per la
Tektronix 3026 potete caricare i file qui .
3 GHz Real Time Spectrum Analyzer
is a portable real time 3 GHz spectrum Analyzer
frequency analysis functions.
The incorporated 3 GHz down Converter
enables you to perform spectrum
analysis, time domain analysis, and analog modulation analysis of Radio
Frequency (RF) signals without connecting any external devices.
, with the adoption of new architecture, can acquire time and frequency domain data simultaneously. It can also accurately capture various kinds of signals with a wide variety of triggering functions.
Real-time trigger functions in frequency domain allow you to trigger on
instantaneous events such as the starting point of a burst signal.
Using the trigger functions in time domain, triggering is available on impulse
noises which are barely captured in frequency domain.
In addition, the 3026
provides measurement functions that can evaluate the
performance of radio devices with simple operation. Moreover, four types of data display functions offered in the system can allow you to analyze the acquired data more precisely.
has the following features:
Measurement frequency range: 50 Hz to 3 GHz
Measurement span: 100 Hz to 3 GHz
Complete real time frequency analysis
Concurrent processing of real time frequency analysis and analog modulation analysis
Provides comprehensive measurement functions to evaluate radio devices
such as occupied bandwidth (OBW), adjacent channel leakage power (ACP)
and power consumption.
Four types of data display:
Analog demodulation display (AM, PM, FM, and FSK)
A range of trigger functions:
Mask pattern trigger
Simultaneous data acquisition in frequency domain and time domain
6.5 inch full-color TFT display
Equipped with a hard disk drive and a 3.5 inch floppy disk drive
A selection of Interface
10 BASE-T port
VGA output port
Manuale di servizio
7.40 Mbytes (7764410 Bytes)
ID del manuale:
Documento elettronico, senza ricerca, molto ben leggibile.
Data di aggiunta:
22 settembre 2019
This manual is divided into sections, such as Specifications and Theory of
Operation. Further, some sections are divided into subsections, such as Product Description and Removal and Installation Procedures.
Sections containing procedures also contain introductions to those procedures.
Be sure to read these introductions because they provide information needed to do the service correctly and efficiently. The following contains a brief description of each manual section.
Specifications contains a description of the analyzer and the characteristics
that apply to it.
Operating Information includes general information and operating
Theory of Operation contains circuit descriptions that support service to the
Performance Verification contains procedures for confirming that the
analyzer functions properly and meets warranted limits.
Adjustment Procedures contains a collection of procedures for adjusting the
analyzer to meet warranted limits.
Maintenance contains information and procedures for performing preventive
and corrective maintenance of the analyzer. These instructions include
cleaning, module removal and installation, and fault isolation to the module.
Options contains information on servicing factory-installed options.
Electrical Parts List contains a statement referring you to Mechanical Parts
List, where both electrical and mechanical modules are listed.
Diagrams contains an block diagram and an interconnection diagram.
Mechanical Parts List includes a table of all replaceable modules, their
descriptions, and their Tektronix