Apparecchiature informatiche

Brüel & Kjær 4231 Calibratore
Produttore:
Brüel & Kjær
Modello: 4231
Data: 2011
Categoria: Strumenti di misura
Gruppo: Calibratore
Descrizione: Sound Level Calibrator
Informazioni:

FEATURES: ❍ Conforms to IEC 942 (1988) Class 1 and ANSI S1.40–1984 (R 1997) ❍ Robust pocket-size design with highly stable level and frequency ❍ Calibration accuracy ± 0.2 dB ❍ 94 dB SPL, or 114 dB SPL for calibration in noisy environments ❍ Extremely small influence of static pressure ❍ Sound pressure independent of microphone equivalent volume ❍ 1 kHz calibration frequency for correct calibration level independent of weighting networks ❍ Fits Brüel & Kjær 1′′ and 1 / 2 ′′ microphones ( 1 / 4 ′′ and 1 / 8 ′′ microphones with adaptor) ❍ Switches off automatically when removed from the microphone The Sound Level Calibrator Type 4231 is a handy, portable sound source for calibration of sound level meters and Other sound measurement equip- ment. The Calibrator is very robust and stable and conforms to IEC 942 Class 1 and ANSI S1.40-1984. The Sound Level Calibrator Type 4231 is a pocket-sized, battery oper- ated sound source for quick and di- rect calibration of sound level meters and Other sound measuring systems. It fits Brüel & Kjær 1′′ and 1 / 2 ′′ micro- phones and, with adaptors, it can be used for 1 / 4 ′′ and 1 / 8 ′′ microphones as well. The calibration frequency is 1000 Hz (the reference frequency for the standardized international weighting networks), so the same cal- ibration value is obtained for all weighting networks (A, B, C, D and Linear). The calibration pressure of 94 ±0.2 dB re 20 μPa is equal to 1 Pa or 1 N/m2. The +20 dB level step gives 114 dB SPL which is convenient for calibration in noisy environments. The design of the 4231 is based on a feed-back arrangement to ensure a highly stable sound pressure level and ease of use. The feed-back loop uses a condenser microphone (see Fig. 1), which is specially developed for this purpose. This microphone is optimised to have extremely high sta- bility and independence of variations in static pressure and temperature around the 1 kHz calibration frequen- cy. The result of this is a user-friendly Calibrator where exact fitting of the microphone is non critical and the ef- fects of changes in temperature and static pressure are negligible. The Calibrator gives a continuous sound pressure level when fitted on a microphone (see Fig. 2) and activat- ed. The sensitivity of the sound meas- uring equipment can then be adjusted until it indicates the correct sound pressure level. The Calibrator is automatically switched off when removed from the microphone. A leather protecting case, which does not need to be removed to use the calibrator, is supplied.

Questi manuali sono disponibili per l'attrezzatura di cui sopra:

Tipo manuale: Scheda tecnica BruelKJAER-9072-Manual-Page-1-Picture
Pagine: 4
Dimensioni: 624.04 Kbytes (639017 Bytes)
Lingua: Inglese
Revisione:
Manuale-ID/numero: BP 1311-14
Data: 01 settembre 2011
Qualità: Documento elettronico, senza ricerca, molto ben leggibile.
Data di aggiunta:
MD5: 55cba8635dcd5f498b842c633a60cfa8
Downloads: 116 dal 01 giugno 2017
Informazioni:

BruelKJAER-9072-Manual-Page-1-Picture


Comments (0)

No comments yet. Be the first!

Add Comment

* Required information
1000
Captcha Image
Powered by Commentics