Equipment information

Tektronix 1740A Analyzer
Manufacturer:
Model:
1740A
Date:
1994
Category:
Group:
Description:
Waveform Vector Monitor

Information

The 1740A/1750A/1760-Series is a half-rack width by three-rack-unit high instrument. It is a versatile waveform monitor/vectorscope for composite and component television signals. Most circuitry and the mechanical components are shared throughout the series. In addition to NTSC and PAL standard versions, a dual standard (NTSC/PAL) version is available. These instruments employ a bright, post accelerated CRT with lighted internal graticule. The parallax free internal graticule structure contains targets and markings for both the vector and waveform functions. The “Lightning” graticule, for the 1760-Series, is electronic, in order to keep from complicating the waveform/vector graticule. Option 74, which uses a white phosphor (P4) CRT, is available for all three instrument series. These monitors are microprocessor controlled to provide greater versatility. Switch settings, affecting the operation of the instrument, are continuously polled by the processor, with any change in status acted upon immediately. Current operating conditions are preserved in Non-Volatile Random Access Memory (NOVRAM), which returns the front panel settings to the current settings, in the event of power interruption (either accidental or routine power down). Many operational measurements are performed on a repetitive basis, and these instruments provide a method of repeating common measurements by simply selecting stored measurement settings from a CRT menu list. The common measurement front panel settings can be stored and named by the user. Measurement specific, front-panel settings can be recalled by pushing the front-panel Preset Menu button and selecting the desired preset by name or number. Many functions that were formerly selected by changing internal jumpers and/or wire straps are now accessible through on screen menu selections. Menus are selected by pushing the appropriate front panel Menu selection. Menu items are then selected by pushing one or more of the assignable switches and/or rotating the assigned front-panel control. Once selected these menu choices are retained until changed by subsequent reconfiguration. The front panel provides both assignable switches (located next to the CRT) and controls (located beneath the CRT), that operate with CRT readout to increase functionality without cluttering the limited front panel area. Function of these switches and controls is dictated by the front-panel Display and initial Menu choices. The 1740A-Series is a full capability waveform/vector monitor that also provides audio and time code measurements. The 1750A-Series has all of the capabilities of the 1740A-Series, with the addition of SCH phase measurements.

show more

User Manual
Manual Type:
User Manual
Pages:
162
Size:
1.85 Mbytes (1936956 Bytes)
Language:
english
Revision:
Manual-ID:
070-8470-06
Date:
Quality:
Electronic document, no scan, very well readable.
Upload date:
2019 09 15
MD5:
ce1ebb1e8121876d331b40c51ac36c99
Downloads:
1989

Information

User Manual Instrument controls and readouts appear in ALL CAPITALS . Topics covered in the user manual are as follows: Introduction Getting Started Operation Basics Making Measurements Appendix A provides instrument specifications, both electrical and mechanical. Appendix B describes remote control interfaces. Appendix C covers routine service procedures, such as replacing fuses and graticule light bulbs. The appendixes are followed by a glossary of specialized terms and an index.

show more

Service Manual
Manual Type:
Service Manual
Pages:
375
Size:
32.12 Mbytes (33683750 Bytes)
Language:
english
Revision:
Manual-ID:
070-8469-00
Date:
1994 10 01
Quality:
Scanned document, all readable.
Upload date:
2019 09 14
MD5:
e432a8ef8cc3684735b5a2f40e66762f
Downloads:
1685

Information

Lea esto antes de utilizar el medidor: Advertencias y precauciones ... Comunicación con Fluke ... Avisos de “Advertencia” y “Precaución” ... Tensión peligrosa ... Aviso de conductores de prueba ... Conservación de la carga de la batería (“modo de reposo”) ... Terminales ... Posiciones del selector giratorio ... Pantalla ... Modo de registro MIN MAX AVG ... Modo de retención de la pantalla ... Luz de fondo (modelo 112 solamente) ... Rango manual y rango automático ... Opciones de encendido ... Mediciones básicas ... Medición de tensiones de CA y CC ... Explicación del comportamiento de entrada cero de CA de los medidores de valor eficaz real ... Medición de capacitancia ... Prueba de continuidad ... Prueba de diodos ... Medición de corriente alterna y continua (modelos 111 y 112) ... Medición de frecuencia ... Utilización del gráfico de barras ... Limpieza ... Pruebas del fusible (modelos 111 y 112) ... Cambio de la batería y del fusible ... Especificaciones ...

show more