Equipment information

Tektronix 067-0587-02 Calibrator
Manufacturer:
Model:
067-0587-02
Date:
1982
Category:
Group:
Description:
Calibration Fixture Signal Standardizer

Information

DESCRIPTION OF INSTRUMENT The 067-0587-02 Signal Standardizer is a calibration aid for all 7000-series mainframes. It will standardize all mainframes to all 7-series Plug-In units, both vertical and horizontal. Test functions permit calibration of deflection factor, transient response, and gain of trigger channels. Bandwidth measurements of mainframes alone can be made by connecting a Frequency Standard to the AUX IN-CW IN connector. The gain of the horizontal channel can be calibrated by applying a signal from a time-mark Generator to the AUX IN-CW IN connector with the TEST selector set to AUX IN.

show more

Service and User Manual
Manual Type:
Service and User Manual
Pages:
94
Size:
6.51 Mbytes (6828813 Bytes)
Language:
english
Revision:
Manual-ID:
070-2477-00
Date:
1982 01 01
Quality:
Scanned document, all readable.
Upload date:
2017 04 23
MD5:
23fc6545c9841c7833825fa29a70ba9c
Downloads:
617

Information

The Instruction Manual has eight sections that provide operating and servicing information for the Signal Standardizer, 067-0587-02. Sections 1 and 2 contain information about operating the instrument, and sections 3 through 8 contain servicing information for use by qualified service personnel. Schematic diagrams are located at the rear of the manual and can be unfolded for reference while reading other parts of the manual. The reference designators and symbols used on the schematics are defined on the first page of the Diagrams and Circuit Board Illustrations section. Abbreviations used in the manual, except those in the parts lists and schematics, comply with the American National Standards Institute Y1.1-1972 publication. The parts lists are computer printouts and use computer-supplied abbreviations.

show more