Informations de l’équipement

Philips Mistral GC2030 Fer à repasser
Modèle: Mistral GC2030
Date: 2003
Catégorie: Appareils électroniques domestiques
Groupe: Fer à repasser
Description: Steam Iron

PRODUCT INFORMATION Features - Colour white/pink - Ceralon soleplate - Tank capacity (200 ml) - Steam rate (25 g/min) - Calc clean - Shot of steam (45 g/min) - Vertical steam - Drip stop - Automatic shut-off - Integrated cord winder with clip - Length of cord : 1.9 m. Safety Information - This product meets the requirements regarding interference suppression on radio and TV. - After the product has been repaired, it should function properly and has to meet the safety requirements and legal regulations as officially laid down at this moment. TECHNICAL INFORMATION Voltage : 120 V, 220 - 240 V Frequency : 50 - 60 Hz Power : 1300 W, 1600 W Water Advice Suitable for tap water use. However if the tap water in your area is very hard, we advise you to mix it with a equal portion of distilled water or to use distilled water only. Soleplate Ceralon, the name indicates the strong combination of a non-stick coating (“lon”) blended with ceramic (“Cera”) particles. The soleplate is coated with Ceralon material which is smooth gliding, high scratch resistance and good durability advantage over the non stick coatings. Auto shut-off (ASO) A relay in the electronic module interrupts the power to the heating element when the Iron has been motionless. - for 30 secs in the horizontal position. - for 8 minutes in the vertical position. The red “Auto-off ” pilot light starts blinking. When the Iron is moved again, it is automatically switched ‘ON’ again. Calc clean The integrated Calc clean function ensure a longer lifetime using normal tap water by removing the Scale out of the steam chamber. Shot of steam (S.O.S) The shot of steam knob releases a powerful shot of steam boost (up to 45 g/min), created by a separate shot of steam area. This helps getting rid of stubborn wrinkles easily. Vertical Steam The same shot of steam button can be used in a vertical position for curtains or hanging garments. Drip stop Water is only released to through the tank valve into the steam chamber if the soleplate temperature is high enough to evaporate all water. If the temperature is too low, the tank valve is closed by means of a bi-metal disc.

Ces manuels sont disponibles pour les équipements ci-dessus :

Type manuel: manuel de réparation Philips-8663-Manual-Page-1-Picture
Pages: 4
Taille: 160.73 Kbytes (164585 Bytes)
Langue: Anglais
Numéro d’identification:
Date: 01 juin 2003
Qualité: Électronique de documents, numérisation sans, bien lisible.
Télécharger date:
MD5: 708e91b87329fa2a266a9f08039e823b
Téléchargements: 176 depuis 31 janvier 2017


Comments (0)

No comments yet. Be the first!

Add Comment

* Required information
Captcha Image
Powered by Commentics