Informations de l’équipement

Fluke 1722A Control Unit
Fabricant:
Modèle:
1722A
Date :
1983
Catégorie :
Groupe:
Description :
Programmable Instrument Controller

Informations

The Fluke 1722A is a programmable Instrument Controller designed to manage a multiple instrument system using the IEEE-488-1980 instrumentation bus. It is able to command and communicate with various devices over this industry-standard bus. User programs give the Controller the ability to collect data, process it, make decisions, respond to instrument service requests, and to format the results of these activities to meet the unique needs of the user. The 1722A stores programs and the collected data on disk. A floppy disk drive is a standard built-in feature of the Instrument Controller. A general purpose RS-232 port is also standard; it permits the Controller to send information out to many types of peripheral devices, including modems and printers. The programmer enters programs at a detachable keyboard. The system communicates with the programmer by way of a CRT display. After a program is entered, it can be stored in memory, on floppy disks or hard disk for later use. During operation, the keyboard can be detached. In this mode, the operator uses the Touch-Sensitive Display to respond to directions from the program, and to give inputs to the system.

plus

Fiche technique
Type manuel:
Fiche technique
Pages :
3
Taille:
435.36 Kbytes (445805 Bytes)
Langue :
english
Révision:
Manuel-ID:
Date :
Qualité:
Document scanné, la lecture en partie mal, en partie illisible.
Date de téléchargement:
28 janvier 2016
MD5:
a25fcc66f153dcd87fb7565f9ecf6415
Téléchargements:
471
Manuel de l'utilisateur
Type manuel:
Manuel de l'utilisateur
Pages :
416
Taille:
13.32 Mbytes (13971447 Bytes)
Langue :
english
Révision:
2
Manuel-ID:
716621
Date :
Qualité:
Document scanné, tous les lisible.
Date de téléchargement:
27 janvier 2016
MD5:
d2470d9f0331537892feb835dbc79820
Téléchargements:
778

Informations

This manual is the primary reference for the Fluke 1722A Instrument Controller. The 1722A System Guide is part of a manual set that supports the Controller, and covers hardware and software. The purpose of the System Guide is to provide an easy to use source of information for a variety of users. Whether this is your first exposure to programmable instrumentation, or whether you already have extensive programming experience, our intention has been to anticipate and meet your needs for accurate, well organized information. First-time users should read the Getting Started manual. Getting Started is designed to help set up the Controller and begin using it. The Fluke BASIC Programming Manual and other language manuals describe how to use a programming language and its available software tools. Describes the organization of the System Guide, and the conventions used in the manual •Section 2 Setting up the Controller Provides a first look, at the Controller, and contains unpacking and setup information. It illustrates controls, indicators, and connectors, and includes start-up procedures. Section 3 Software Configuration Describes the Operating System software, and the other programs on a new System disk. Section 4 Devices and Files Describes the system’s resources and how to use them. This section contains a complete description of the File Utility, Section 5 Communications Tells how to use the Controller to send and receive information using the ports for the IEEE-488 bus and the RS-232 interface. Section 6 Creating and Editing Programs Explains how to use the Editor program to write and modify programs. Section 7 Automating System Functions Explains how to use the various software and hardware resources to automate the functions of the Controller. Section 8 Display Explains how to use the Controller’s graphics capabilities to design detailed and informative displays. Section 9 Appendices Contains useful reference material, including a list of options and accessories and a glossary of terms. The material in this manual is organized in categories of tasks, in the order that most persons would perform those tasks. If more information about a specific topic is needed, consult the Index.

plus

manuel de réparation
Type manuel:
manuel de réparation
Pages :
515
Taille:
51.36 Mbytes (53857757 Bytes)
Langue :
english
Révision:
2
Manuel-ID:
732156
Date :
01 mars 1992
Qualité:
Document scanné, tous les lisible.
Date de téléchargement:
08 janvier 2018
MD5:
f1fe35889a0e35fc088b7a554629b6ce
Téléchargements:
1826

Informations

1-1. THE 1722A INSTRUMENT CONTROLLER ... 1-3 1-2. THE 1752A DATA ACQUISITION SYSTEM ... 1-3 1-3. PHYSICAL LAYOUT ... 1-3 1-4. POWER REQUIREMENTS ... 1-3 2 THEORY OF OPERATION ... 2-1 2-1. INTRODUCTION ... 2-3 2-2. Bus Architecture ... 2-3 2-3. Description of Distinctive Devices ... 2-3 2-4. TMS99105 16-Bit Microprocessor ... 2-3 2-10. Programmable Array Logic Devices (PALS) ... 2-4 2-11. Dynamic Memory ... 2-4 2-12. Memory Mapper ... 2-4 2-13. Introduction to 1722A Modules ... 2-4 2-14. Power-Up Module (PUP) ... 2-4 2-15. Single-Board Computer (SBC) ... 2-4 2-16. Video/Graphics/Keyboard Interface (VGK) ... 2-5 2-17. Keyboard ... 2-5 2-18. Power Supply (OEM) ... 2-5 2-19. Video Monitor (OEM) ... 2-5 2-20. Floppy Disk Drive (OEM) ... 2-5 2-21. POWER-UP MODULE (PUP) THEORY OF OPERATION ... 2-5 2-22. Functional Description ... 2-5 2-23. Circuit Description ... 2-6 2-24. Circuit Operation ... 2-6 2-25. SINGLE-BOARD COMPUTER THEORY OF OPERATION ... 2-6 2-26. Introduction ... 2-6 2-27. Functional Description of SBC Operation ... 2-6 2-28. Bus Structure ... 2-7 2-29. Data Bus ... 2-9 2-30. Address Bus ... 2-9 2-31. Memory Mapper ... 2-9 2-32. Address Decoding ... 2-9 2-36. Memory ... 2-10 2-38. Interrupt Logic ... 2-11 2-41. Time-of-Day Clock (Non-Volatile Clock) ... 2-12 2-42. I/O Devices ... 2-12 2-47. Timing ... 2-13 '2-50. VIDEO/GRAPHICS/KEYBOARD INTERFACE (VGK) ... 2-16 2-51. Introduction ... 2-16 2-52. The Microprocessor ... 2-19 2-53. Address Logic ... 2-19 2-54. Data Input and Output ... 2-21 2-55. ARGUS Interface ... 2-22 2-56. Data Communication ... 2-22 2-57. Power-On Preset ... 2-22 2-58. TSO and Programmer’s Keyboards ... 2-22 2-59. 1722A Keyboard Interface ... 2-22 2-60. 1720A Keyboard Interface ... 2-23 2-61. Touch-Sensitive Overlay (TSO) ... 2-23 2-62. Character Display ... 2-24 2-63. Character-Generating ROM ... 2-24 2-64. Character Timing ... 2-24 2-65. Attributes ... 2-24 2-66. Double Size ... 2-26 2-67. Composite Video Option ... 2-28 2-68. Character-Memory Access ... 2-28 2-69. Programming the CRTC ... 2-29 2-70. Graphics Display ... 2-29 2-71. Graphics Memory Timing ... 2-29 2-72. Display Access ... 2-29 7 2-73. Vector Generator ... 2-31 2-74. Update Mode ... 2-32 2-75. Processor Access To Graphics Memory ... 2-32 2-76. KEYBOARD THEORY OF OPERATION ... 2-32 2-77. Introduction ... 2-32 2-78. Operation ... 2-32 2-79. Power-Up Sequence ... 2-32 2-80. Scanning ... 2-32 2-81. Communication Protocol ... 2-33 2-82. Data Transmission Format ... 2-33 2-83. LED Control ... 2-33 2-84. Transducer (Beeper) Control ... 2-33 3 MAINTENANCE ... 3-1 3-1. INTRODUCTION ... 3.5 3-2. Required Tools and Equipment ... 3.5 3-3. SYSTEM DIAGNOSTIC SOFTWARE ... 3.5 3-4. Introduction ... 3.5 3-5. MAINTENANCE PHILOSOPHY ... 3.5 3-6. DIAGNOSTIC DESIGN ... 3.5 3-7. MENU LEVELS ... 3-5 3-8. OPERATION ... 3-8 3-9. Main Menu ... 3.9 3-10. Test Menu ... 3-11 3-11. Subtest Menus ... 3-12 3-12. SUBTEST DESCRIPTIONS ... 3-13 3-13. Single-Board Computer (SBC) ... 3.13 3-14. Floppy Disk Drive ... 3-14 3-15. Video/Graphics/Keyboard Interface (VGK) ... 3-15 3-16. Option -002, Parallel Interface ... 3-15 3-17. Option -004, -005, Bubble Memory ... 3-16 3-18. RAM Options (-006, -007, -016, -017) ... 3-16 3-19. Option -008, IEEE-488/RS-232-C ... 3-16 3-20. Option -009, Dual Serial Interface ... 3-16 3-21. Option -010, Analog Measurement Processor (1752A) ... 3-16 3-22. Analog Output Option -011 (1752A) ... 3-18 3-23. Option -012, Counter/Totalizer (1752A) ... 3-18 3-24. NVRAM Options (-018, -019, -020) ... 3-19 3-25. Dual Disk Drive 1760/61A ... 3-19 3-26. Winchester Disk Drives 1765A/AB ... 3-19 3-27. SCSI Interface and Option -440 Hard Disk Test ... 3-19 3-28. System Diagnostic Error Messages ... 3-20 3-29. TROUBLESHOOTING ... 3-20 3-30. Introduction ... 3-20 3-31. General Troubleshooting Tips ... 3-20 3-32. LOGIC TECHNIQUES ... 3-20 3-33. CIRCUIT ACTIVITY OBSERVATION ... 3-21 3-34. POOR CONNECTIONS ... 3-21 3-35. Dead Box Procedure ... 3-21 3-36. INTRODUCTION ... 3-21 3-37. POWER-UP INDICATIONS ... 3-21 3-38. Normal Operation ... 3-21 3-39. Fault Indication ... 3-21 3-40. DISPLAY INDICATIONS ... 3-22 3-41. Normal Operation ... 3-22 3-42. Fault Indication ... 3-22 3-43. DISK DRIVE INDICATIONS ... 3-22 3-44. Normal Operation ... 3-22 3-45. Fault Indications ... 3-22 3-46. Disk Drive Fault Indications ... 3-23 3-47. SYSTEM DIAGNOSTIC INDICATIONS ... 3-23 3-48. Normal Operation ... 3-23 3-49. Fault Indications ... 3-23 3-50. KEYBOARD INDICATIONS ... 3-23 3-51. Normal Operation ... 3-23 3-52. Fault Indication ... 3-23 3-53. Board Isolation Procedure ... 3-23 3-54. INTRODUCTION ... 3-23 3-55. ISOLATING DEFECTIVE PUP OR VGK ... 3-24 3-56. ISOLATING DEFECTIVE SBC OR VGK ... 3-24 3-57. Fault Analysis Procedure ... 3-25 3-58. SBC FAULT ANALYSIS ... 3-25 3-59. Introduction ... 3-25 3-60. Symptoms ... 3-25 3-61. VGK FAULT ANALYSIS ... 3-28 3-62. Introduction ... 3-28 3-63. Symptoms ... 3-29 3-64. KEYBOARD FAULT ANALYSIS ... 3-31 3-65. PUP FAULT ANALYSIS ... 3-31 3-66. Troubleshooting OEM Modules ... 3-31 3-67. ACCESS PROCEDURES ... 3-31 3-68. Introduction ... 3-31 3-69. External Line Fuse Replacement ... 3-31 3-70. Top and Bottom Chassis Cover Removal ... 3-31 3-71. Power Supply Fuse Replacement ... 3-31 3-72. Card-Cage Cover Removal ... 3-33 3-73. Disk Drive Access (Old Chassis, Figure 3-13) ... 3-34 3-74. Disk Drive Access (New Chassis, Figure 3-15) ... 3-34 3-75. Bade Panel Removal ... 3-34 3-76. Fan Removal ... 3-38 3-77. Power Supply Removal ... 3-38 3-78. Power-Up Assembly (PUP) Removal ... 3-38 3-79. Video Monitor Circuit Card Removal ... 3-38 3-80. Front Panel Removal ... 3-40 3-81. CRT Removal ... 3-41 3-82. Touch Sensitive Overlay (TSO) Removal ... 3-41 3-83. CALIBRATION AND ALIGNMENT ... 3-41 3-84. Required Equipment ... 3-41 3-85. Preparation ... 3-41 3-86. Video Alignment Procedure ... 3-41 3-87. CENTERING 1 (LEFT & RIGHT) ... 3-43 3-88. CENTERING 2 (UP AND DOWN) ... 3-43 3-89. VERIFY ROTATION ... 3-43 3-90. PINCUSHION/BARREL CORRECTION ... 3-43 3-91. HORIZONTAL ALIGNMENT 1 ... 3-43 3-92. HORIZONTAL ALIGNMENT 2 ... 3-43 3-93. HORIZONTAL ALIGNMENT 3 ... 3-43 3-94. HORIZONTAL ALIGNMENT 4 ... 3-43 3-95. VERTICAL ALIGNMENT 1 ... 3-43 3-96. VERTICAL ALIGNMENT 2 ... 3-43 3-97. VERTICAL ALIGNMENT 3 ... 3-43 3-98. VERTICAL ALIGNMENT 4 ... 3-43 3-99. CENTERING CHECK ... 3-43 3-100. BRIGHTNESS CONTROL CHECK ... 3-43 3-101. Floppy Disk Drive Speed Adjustment Procedure ... 3-47 3-102. Floppy Disk Controller Calibration ... 3-47 3-103. PREPARATION ... 3-47 3-104. VCO FREQUENCY ADJUSTMENT (REV F AND LATER) ... 3-47 3-105. Equipment Setup ... 3-47 3-106. Adjustment ... 3-47 3-107. VCO FREQUENCY ADJUSTMENT (REV D ONLY) ... 3-47 3-108. Equipment Setup ... 3-48 3-109. Adjustment ... 3-48 3-110. WRITE PULSE-WIDTH ADJUSTMENT (REV D ONLY) ... 3-48 3-111. Equipment Setup ... 3-48 3-112. Adjustment ... 3-48 3-113. READ PULSE-WIDTH ADJUSTMENT (REV D ONLY) ... 3-48 3-114. Equipment Setup ... 3-48 3-115. Adjustment ... 3-48 3-116. Button-Up ... 3-48 3-117. PREVENTIVE MAINTENANCE ... 3-48 3-118. System Diagnostic Procedure ... 3-48 3-119. Filter Replacement and Cleaning ... 3-48 3-120. Cabinet and Touch-Sensitive Overlay Cleaning ... 3-49 3-121. SHIPPING ... 3-49 4 LIST OF REPLACEABLE PARTS ... ... 4-1. INTRODUCTION ... 4-3 4-2. REPLACEMENT MODULES, CABLES, AND CONNECTORS ... 4-4 4-3. FIELD SERVICE KITS ... 4-4 4-4. REPLACEMENT PROMS AND PALS ... 4-4 4-5. HOW TO OBTAIN PARTS ... 4-4 4-6. MANUAL STATUS INFORMATION ... 4-4 4-7. NEWER INSTRUMENTS ... 4-4 4-8. TECHNICAL SERVICE CENTERS ... 4-4 4-9. PARTS LISTS ... 4-4 TABLE OF CONTENTS ... 5-1 6 OPTIONS ... 6-1 6-1. INTRODUCTION ... 6-3 6-2. OPTIONS ... 6-3 6-3. Memory Options ... 6-3 6-4. Interface Options ... 6-3 6-5. 1752A Measurement and Control Options ... 6-3 6-6. LANGUAGE SYSTEMS ... 6-3 6-7. APPLICATION SOFTWARE OPTIONS ... 6-4 6-8. PERIPHERALS ... 6-4 6-9. SERVICE INFORMATION ... 6-4 6-10. 1722A/1752A CONFIGURATION INFORMATION ... 6-4 17XXA-006/7/16/17 RAM EXPANSION MODULE ... 006-1 17XXA-008IEEE-488/RS-232-C INTERFACE ... 008-1 17XXA-009 DUAL SERIAL INTERFACE ... 009-1 1752A-010 ANALOG MEASUREMENT PROCESSOR ... 010-1 1752A-011 ANALOG OUTPUT MODULE ... 011-1 1752A-012 COUNTER/TOTALIZER ... 012-1 1752A-013 MAINFRAME INTERFACE ASSEMBLY ... 013-1 17XXA-018/019/020 Nonvolatile Memory ... 018-1 17XXA-440 40M-Byte Hard Disk ... 440-1 7 APPENDICES ... 7-1 A. Glossary ... A-l B. IEEE-488 Reference ... B-l C. RS-232-C Reference ... C-l 8 INDEX 9 OEM MANUALS 10 1711A/AA COMMUNICATION/MEASUREMENT SYSTEM ... 10-1 10-1. INTRODUCTION ... 10-3 10-2. THEORY OF OPERATION ... 10-3 10-3. MAINTENANCE ... 10-3 10-4. LIST OF REPLACEABLE PARTS ... 10-3 10-5. Manual Status Information ... 10-3 10-6. Newer Instruments ... 10-3 10-7. SCHEMATIC DIAGRAMS ... 10-3 11 1722A/AP INSTRUMENT CONTROLLER ... 11-1 11-1. INTRODUCTION ... 11-3 11-2. Port Configuration ... 11-3 11-3. Remote Control Unit (RCU) ... 11-3 11-4. THEORY OF OPERATION ... 11-3 11-5. Communication Protocol ... 11-3 11-6. Switch Configuration ... 11-4 11-7. Operation ... 11-4 11-12. MAINTENANCE ... 11-5 11-13. Remote Control Unit Fault Analysis ... 11-5 11-14. LIST OF REPLACEABLE PARTS ... 11-5 11-15. Module Revision Information ... 11-5 11-16. NEWER INSTRUMENTS ... 11-5

plus

manuel de réparation
Type manuel:
manuel de réparation
Pages :
515
Taille:
51.36 Mbytes (53857757 Bytes)
Langue :
english
Révision:
2
Manuel-ID:
732156
Date :
01 mars 1992
Qualité:
Document scanné, tous les lisible.
Date de téléchargement:
08 janvier 2018
MD5:
f1fe35889a0e35fc088b7a554629b6ce
Téléchargements:
1826

Informations

1-1. THE 1722A INSTRUMENT CONTROLLER ... 1-3 1-2. THE 1752A DATA ACQUISITION SYSTEM ... 1-3 1-3. PHYSICAL LAYOUT ... 1-3 1-4. POWER REQUIREMENTS ... 1-3 2 THEORY OF OPERATION ... 2-1 2-1. INTRODUCTION ... 2-3 2-2. Bus Architecture ... 2-3 2-3. Description of Distinctive Devices ... 2-3 2-4. TMS99105 16-Bit Microprocessor ... 2-3 2-10. Programmable Array Logic Devices (PALS) ... 2-4 2-11. Dynamic Memory ... 2-4 2-12. Memory Mapper ... 2-4 2-13. Introduction to 1722A Modules ... 2-4 2-14. Power-Up Module (PUP) ... 2-4 2-15. Single-Board Computer (SBC) ... 2-4 2-16. Video/Graphics/Keyboard Interface (VGK) ... 2-5 2-17. Keyboard ... 2-5 2-18. Power Supply (OEM) ... 2-5 2-19. Video Monitor (OEM) ... 2-5 2-20. Floppy Disk Drive (OEM) ... 2-5 2-21. POWER-UP MODULE (PUP) THEORY OF OPERATION ... 2-5 2-22. Functional Description ... 2-5 2-23. Circuit Description ... 2-6 2-24. Circuit Operation ... 2-6 2-25. SINGLE-BOARD COMPUTER THEORY OF OPERATION ... 2-6 2-26. Introduction ... 2-6 2-27. Functional Description of SBC Operation ... 2-6 2-28. Bus Structure ... 2-7 2-29. Data Bus ... 2-9 2-30. Address Bus ... 2-9 2-31. Memory Mapper ... 2-9 2-32. Address Decoding ... 2-9 2-36. Memory ... 2-10 2-38. Interrupt Logic ... 2-11 2-41. Time-of-Day Clock (Non-Volatile Clock) ... 2-12 2-42. I/O Devices ... 2-12 2-47. Timing ... 2-13 '2-50. VIDEO/GRAPHICS/KEYBOARD INTERFACE (VGK) ... 2-16 2-51. Introduction ... 2-16 2-52. The Microprocessor ... 2-19 2-53. Address Logic ... 2-19 2-54. Data Input and Output ... 2-21 2-55. ARGUS Interface ... 2-22 2-56. Data Communication ... 2-22 2-57. Power-On Preset ... 2-22 2-58. TSO and Programmer’s Keyboards ... 2-22 2-59. 1722A Keyboard Interface ... 2-22 2-60. 1720A Keyboard Interface ... 2-23 2-61. Touch-Sensitive Overlay (TSO) ... 2-23 2-62. Character Display ... 2-24 2-63. Character-Generating ROM ... 2-24 2-64. Character Timing ... 2-24 2-65. Attributes ... 2-24 2-66. Double Size ... 2-26 2-67. Composite Video Option ... 2-28 2-68. Character-Memory Access ... 2-28 2-69. Programming the CRTC ... 2-29 2-70. Graphics Display ... 2-29 2-71. Graphics Memory Timing ... 2-29 2-72. Display Access ... 2-29 7 2-73. Vector Generator ... 2-31 2-74. Update Mode ... 2-32 2-75. Processor Access To Graphics Memory ... 2-32 2-76. KEYBOARD THEORY OF OPERATION ... 2-32 2-77. Introduction ... 2-32 2-78. Operation ... 2-32 2-79. Power-Up Sequence ... 2-32 2-80. Scanning ... 2-32 2-81. Communication Protocol ... 2-33 2-82. Data Transmission Format ... 2-33 2-83. LED Control ... 2-33 2-84. Transducer (Beeper) Control ... 2-33 3 MAINTENANCE ... 3-1 3-1. INTRODUCTION ... 3.5 3-2. Required Tools and Equipment ... 3.5 3-3. SYSTEM DIAGNOSTIC SOFTWARE ... 3.5 3-4. Introduction ... 3.5 3-5. MAINTENANCE PHILOSOPHY ... 3.5 3-6. DIAGNOSTIC DESIGN ... 3.5 3-7. MENU LEVELS ... 3-5 3-8. OPERATION ... 3-8 3-9. Main Menu ... 3.9 3-10. Test Menu ... 3-11 3-11. Subtest Menus ... 3-12 3-12. SUBTEST DESCRIPTIONS ... 3-13 3-13. Single-Board Computer (SBC) ... 3.13 3-14. Floppy Disk Drive ... 3-14 3-15. Video/Graphics/Keyboard Interface (VGK) ... 3-15 3-16. Option -002, Parallel Interface ... 3-15 3-17. Option -004, -005, Bubble Memory ... 3-16 3-18. RAM Options (-006, -007, -016, -017) ... 3-16 3-19. Option -008, IEEE-488/RS-232-C ... 3-16 3-20. Option -009, Dual Serial Interface ... 3-16 3-21. Option -010, Analog Measurement Processor (1752A) ... 3-16 3-22. Analog Output Option -011 (1752A) ... 3-18 3-23. Option -012, Counter/Totalizer (1752A) ... 3-18 3-24. NVRAM Options (-018, -019, -020) ... 3-19 3-25. Dual Disk Drive 1760/61A ... 3-19 3-26. Winchester Disk Drives 1765A/AB ... 3-19 3-27. SCSI Interface and Option -440 Hard Disk Test ... 3-19 3-28. System Diagnostic Error Messages ... 3-20 3-29. TROUBLESHOOTING ... 3-20 3-30. Introduction ... 3-20 3-31. General Troubleshooting Tips ... 3-20 3-32. LOGIC TECHNIQUES ... 3-20 3-33. CIRCUIT ACTIVITY OBSERVATION ... 3-21 3-34. POOR CONNECTIONS ... 3-21 3-35. Dead Box Procedure ... 3-21 3-36. INTRODUCTION ... 3-21 3-37. POWER-UP INDICATIONS ... 3-21 3-38. Normal Operation ... 3-21 3-39. Fault Indication ... 3-21 3-40. DISPLAY INDICATIONS ... 3-22 3-41. Normal Operation ... 3-22 3-42. Fault Indication ... 3-22 3-43. DISK DRIVE INDICATIONS ... 3-22 3-44. Normal Operation ... 3-22 3-45. Fault Indications ... 3-22 3-46. Disk Drive Fault Indications ... 3-23 3-47. SYSTEM DIAGNOSTIC INDICATIONS ... 3-23 3-48. Normal Operation ... 3-23 3-49. Fault Indications ... 3-23 3-50. KEYBOARD INDICATIONS ... 3-23 3-51. Normal Operation ... 3-23 3-52. Fault Indication ... 3-23 3-53. Board Isolation Procedure ... 3-23 3-54. INTRODUCTION ... 3-23 3-55. ISOLATING DEFECTIVE PUP OR VGK ... 3-24 3-56. ISOLATING DEFECTIVE SBC OR VGK ... 3-24 3-57. Fault Analysis Procedure ... 3-25 3-58. SBC FAULT ANALYSIS ... 3-25 3-59. Introduction ... 3-25 3-60. Symptoms ... 3-25 3-61. VGK FAULT ANALYSIS ... 3-28 3-62. Introduction ... 3-28 3-63. Symptoms ... 3-29 3-64. KEYBOARD FAULT ANALYSIS ... 3-31 3-65. PUP FAULT ANALYSIS ... 3-31 3-66. Troubleshooting OEM Modules ... 3-31 3-67. ACCESS PROCEDURES ... 3-31 3-68. Introduction ... 3-31 3-69. External Line Fuse Replacement ... 3-31 3-70. Top and Bottom Chassis Cover Removal ... 3-31 3-71. Power Supply Fuse Replacement ... 3-31 3-72. Card-Cage Cover Removal ... 3-33 3-73. Disk Drive Access (Old Chassis, Figure 3-13) ... 3-34 3-74. Disk Drive Access (New Chassis, Figure 3-15) ... 3-34 3-75. Bade Panel Removal ... 3-34 3-76. Fan Removal ... 3-38 3-77. Power Supply Removal ... 3-38 3-78. Power-Up Assembly (PUP) Removal ... 3-38 3-79. Video Monitor Circuit Card Removal ... 3-38 3-80. Front Panel Removal ... 3-40 3-81. CRT Removal ... 3-41 3-82. Touch Sensitive Overlay (TSO) Removal ... 3-41 3-83. CALIBRATION AND ALIGNMENT ... 3-41 3-84. Required Equipment ... 3-41 3-85. Preparation ... 3-41 3-86. Video Alignment Procedure ... 3-41 3-87. CENTERING 1 (LEFT & RIGHT) ... 3-43 3-88. CENTERING 2 (UP AND DOWN) ... 3-43 3-89. VERIFY ROTATION ... 3-43 3-90. PINCUSHION/BARREL CORRECTION ... 3-43 3-91. HORIZONTAL ALIGNMENT 1 ... 3-43 3-92. HORIZONTAL ALIGNMENT 2 ... 3-43 3-93. HORIZONTAL ALIGNMENT 3 ... 3-43 3-94. HORIZONTAL ALIGNMENT 4 ... 3-43 3-95. VERTICAL ALIGNMENT 1 ... 3-43 3-96. VERTICAL ALIGNMENT 2 ... 3-43 3-97. VERTICAL ALIGNMENT 3 ... 3-43 3-98. VERTICAL ALIGNMENT 4 ... 3-43 3-99. CENTERING CHECK ... 3-43 3-100. BRIGHTNESS CONTROL CHECK ... 3-43 3-101. Floppy Disk Drive Speed Adjustment Procedure ... 3-47 3-102. Floppy Disk Controller Calibration ... 3-47 3-103. PREPARATION ... 3-47 3-104. VCO FREQUENCY ADJUSTMENT (REV F AND LATER) ... 3-47 3-105. Equipment Setup ... 3-47 3-106. Adjustment ... 3-47 3-107. VCO FREQUENCY ADJUSTMENT (REV D ONLY) ... 3-47 3-108. Equipment Setup ... 3-48 3-109. Adjustment ... 3-48 3-110. WRITE PULSE-WIDTH ADJUSTMENT (REV D ONLY) ... 3-48 3-111. Equipment Setup ... 3-48 3-112. Adjustment ... 3-48 3-113. READ PULSE-WIDTH ADJUSTMENT (REV D ONLY) ... 3-48 3-114. Equipment Setup ... 3-48 3-115. Adjustment ... 3-48 3-116. Button-Up ... 3-48 3-117. PREVENTIVE MAINTENANCE ... 3-48 3-118. System Diagnostic Procedure ... 3-48 3-119. Filter Replacement and Cleaning ... 3-48 3-120. Cabinet and Touch-Sensitive Overlay Cleaning ... 3-49 3-121. SHIPPING ... 3-49 4 LIST OF REPLACEABLE PARTS ... ... 4-1. INTRODUCTION ... 4-3 4-2. REPLACEMENT MODULES, CABLES, AND CONNECTORS ... 4-4 4-3. FIELD SERVICE KITS ... 4-4 4-4. REPLACEMENT PROMS AND PALS ... 4-4 4-5. HOW TO OBTAIN PARTS ... 4-4 4-6. MANUAL STATUS INFORMATION ... 4-4 4-7. NEWER INSTRUMENTS ... 4-4 4-8. TECHNICAL SERVICE CENTERS ... 4-4 4-9. PARTS LISTS ... 4-4 TABLE OF CONTENTS ... 5-1 6 OPTIONS ... 6-1 6-1. INTRODUCTION ... 6-3 6-2. OPTIONS ... 6-3 6-3. Memory Options ... 6-3 6-4. Interface Options ... 6-3 6-5. 1752A Measurement and Control Options ... 6-3 6-6. LANGUAGE SYSTEMS ... 6-3 6-7. APPLICATION SOFTWARE OPTIONS ... 6-4 6-8. PERIPHERALS ... 6-4 6-9. SERVICE INFORMATION ... 6-4 6-10. 1722A/1752A CONFIGURATION INFORMATION ... 6-4 17XXA-006/7/16/17 RAM EXPANSION MODULE ... 006-1 17XXA-008IEEE-488/RS-232-C INTERFACE ... 008-1 17XXA-009 DUAL SERIAL INTERFACE ... 009-1 1752A-010 ANALOG MEASUREMENT PROCESSOR ... 010-1 1752A-011 ANALOG OUTPUT MODULE ... 011-1 1752A-012 COUNTER/TOTALIZER ... 012-1 1752A-013 MAINFRAME INTERFACE ASSEMBLY ... 013-1 17XXA-018/019/020 Nonvolatile Memory ... 018-1 17XXA-440 40M-Byte Hard Disk ... 440-1 7 APPENDICES ... 7-1 A. Glossary ... A-l B. IEEE-488 Reference ... B-l C. RS-232-C Reference ... C-l 8 INDEX 9 OEM MANUALS 10 1711A/AA COMMUNICATION/MEASUREMENT SYSTEM ... 10-1 10-1. INTRODUCTION ... 10-3 10-2. THEORY OF OPERATION ... 10-3 10-3. MAINTENANCE ... 10-3 10-4. LIST OF REPLACEABLE PARTS ... 10-3 10-5. Manual Status Information ... 10-3 10-6. Newer Instruments ... 10-3 10-7. SCHEMATIC DIAGRAMS ... 10-3 11 1722A/AP INSTRUMENT CONTROLLER ... 11-1 11-1. INTRODUCTION ... 11-3 11-2. Port Configuration ... 11-3 11-3. Remote Control Unit (RCU) ... 11-3 11-4. THEORY OF OPERATION ... 11-3 11-5. Communication Protocol ... 11-3 11-6. Switch Configuration ... 11-4 11-7. Operation ... 11-4 11-12. MAINTENANCE ... 11-5 11-13. Remote Control Unit Fault Analysis ... 11-5 11-14. LIST OF REPLACEABLE PARTS ... 11-5 11-15. Module Revision Information ... 11-5 11-16. NEWER INSTRUMENTS ... 11-5

plus

Ajouter un commentaire

* Information obligatoire
1000
Image Captcha

Commentaires

Pas encore de commentaires. Soyez le premier !