Informations de l’équipement

Yaesu FT-101B Émetteur-récepteur
Fabricant:
Yaesu
Modèle: FT-101B
Date:
Catégorie: Radio et des communications
Groupe: Émetteur-récepteur
Description: SSB Transceiver
Informations:

The model FT-I01B/277B SSB Transceiver is a precision built, compact high performance Transceiver of advanced design providing SSB (USB, LSB selectable), CW and AM modes of operation. The Transceiver operates at an input of 260 watts SSB, 180 watts CW and 80 watts AM on all bands 160 to 10 meters. All circuits, except the Transmitter driver and linear amplifier, are transistorized and composed of standard computer type plug-in modules, permiting easy maintenance. The Transceiver is self-contained, requiring only an Antenna and an A.C. mains for home, portable or mobile operation. The Transceiver may be operated from 100/110/ 117/200/220/234 volts AC when appropriately wired but is normally supplied for 117 volt AC and 12 volt DC operation. The two-way solid state Power Supply is an integral part of the unit. Two power cords are provided with the Transceiver. Selection of AC or DC power source is automatically made when the proper line cord plug is inserted. For mobile operation a separate switch is provided on the front panel to turn off the tube heaters while in the receive mode. In this mode the Transceiver draws only 0.5 amp. less than your auto dash lights. All accessories, such as VOX, break-in CW with side-tone, 25 and 100 KHz calibrators, noise blanker, 10 MHz WWV are built-in. In addition , dual VFO adaptor, crystal control adaptor, speaker and clarifier are integral parts of the unit. Provision is made for the installation of 600 Hz crystal filter for the expert CW* DX operator. The CW filter is selected automatically when the Transceiver mode switch is placed in the CW position. The entire Transceiver weighs approximately 30 pounds, is 13 1/2” wide, 6” high, 11 1/2” deep. Construction is of heavy-gauge steel which provides an extremely rugged package, virtually immune to the effects of vibration and shock. The SP 101P/277P. combination Phone patch and external speaker, is a valuable optional accessory for base operation. The.unit features an elliptical type speaker for high quality voice reproduction. Other optional equipment includes the FV-101B/277B external VFO and mobile mounting brackets.

Ces manuels sont disponibles pour les équipements ci-dessus :

Type manuel: Manuel de l'utilisateur et Schéma cirquit Yaesu-6248-Manual-Page-1-Picture
Pages: 43
Taille: 6.42 Mbytes (6734711 Bytes)
Langue: Anglais
Révision:
Numéro d’identification:
Date:
Qualité: Document scanné, tous les lisible.
Télécharger date:
MD5: 45aeaa76c5e050181192d1d7ff389448
Téléchargements: 561 depuis 31 juillet 2014
Informations:

Yaesu-6248-Manual-Page-1-Picture


Comments (0)

No comments yet. Be the first!

Add Comment

* Required information
1000
Captcha Image