Informations de l’équipement

Kantronics KPC-2 Modem
Fabricant:
Kantronics
Modèle: KPC-2
Date: 1989
Catégorie: Équipement informatique
Groupe: Modem
Description: Terminal Node Controller
Informations:

Ces manuels sont disponibles pour les équipements ci-dessus :

Type manuel: Manuel de l'utilisateur Kantronics-5511-Manual-Page-1-Picture
Pages: 70
Taille: 2.65 Mbytes (2777186 Bytes)
Langue: Anglais
Révision:
Numéro d’identification:
Date:
Qualité: Document scanné, tous les lisible.
Télécharger date:
MD5: 139217c746b61a53e26eb4b711c65717
Téléchargements: 2290 depuis 01 mars 2014
Informations:

This manual will introduce you to the various modes of operation available with your new Kantronics TNC. It assumes that you have read the Installation Manual, and have successfully completed connecting your TNC to your computer and radios. First, we start with the modes common to all Kantronics TNCs, including Packet, the Personal Mailbox, KA-NODE, WE FAX and KISS Mode. From here, we move into the modes that are only available on the Kantronics All Mode (KAM) communicator. These include RTTY, ASCII, AMTOR, and CW. As you start, we must assume that you have your computer turned on, and that you have started your terminal or communication software on your computer. Since there are many different types of computers and hundreds of terminal programs available, we will not attempt to tell you how to accomplish these steps. If you have problems starting either your computer or your terminal program, refer to the manuals that came with them.

Kantronics-5511-Manual-Page-1-Picture


Type manuel: Manuel de l'utilisateur Kantronics-5510-Manual-Page-1-Picture
Pages: 74
Taille: 2.51 Mbytes (2636087 Bytes)
Langue: Anglais
Révision:
Numéro d’identification:
Date:
Qualité: Document scanné, la lecture en partie mal, en partie illisible.
Télécharger date:
MD5: 74f96ebfffc8d478dd9e0f65abaa43b0
Téléchargements: 2270 depuis 01 mars 2014
Informations:

Commands Manual Introduction to Commands ... 1 Some Abbreviations ... 1 Commands Structure ... 1 Entry ... 1 Format ... 2 Parameter Types ... 2 n (range) ... 2 n ($00-$FF) ... 3 flags Choice AI Choice B ... 3 callsigns xxxxxx-n ... 3 text ... 3 dual port ... 4 Commands ... 5 Directives ... 49 Ctrl-C Directives ... 49 KA-NODE and PBBS Directives ... 51 Messages From the TNC ... 55 ASCII Chart ... 61

Kantronics-5510-Manual-Page-1-Picture


Type manuel: Service et Manuel de l'utilisateur Kantronics-5512-Manual-Page-1-Picture
Pages: 71
Taille: 1.84 Mbytes (1926144 Bytes)
Langue: Anglais
Révision:
Numéro d’identification:
Date:
Qualité: Document scanné, tous les lisible.
Télécharger date:
MD5: e1d4c6652f400ba8eedadd456aa62668
Téléchargements: 2284 depuis 01 mars 2014
Informations:

Installation Manual Warranty ... 1 Return/Repair Procedures ... 2 Radio Frequency Interference Statement ... 3 RFI Suppression ... 3 Precautions ... 4 Back Panels ... 5 Connecting the TNC to Your Computer ... 7 RS-232/TTL Jumper ... 7 TNC to Computer Connection ... i ... 7 Cable Wiring ... 8 Other Common Computers ... 11 Commodore C-&1, C-128 or VIC-20 ... 11 PQjr ... 11 Radio Shack Color Computers ... 12 TRS Model-100 ... 12 Atari 850 Interface ... 13 Connecting Your Radios ... 15 DB-9 Radio Connector ... 15 8-Pin Din Radio Connector ... 17 5-Pin Din Radio Connector ... 18 AFSK Output Level ... 19 KAM - AFSK Output - VHF ... 19 KAM - AFSK Output - HF ... 19 KPC-4 - AFSK Output ... 20 KPC-2 - AFSK Output ... 20 KPC-1 - AFSK Output ... 20 KPC-2400 - AFSK Output ... 21 Interfacing Hand-Held Radios ... 23 In Case of Difficulty ... 27 TNC Does Not "Sign-On" to Computer ... 27 You Are Unable to Make a "Connect" ... 27 Cannot Transmit on Any Port ... 28 Cannot Return to Command Mode ... 28 Kanterm Program Problems ... 28 TNC Won't Transmit on HF - VHF is OK ... 28 Assembly and Disassembly of the TNC ... 29 Hard Reset ... 30 Calibration/Equalization ... 31 Watch Dog Timers ... 33

Kantronics-5512-Manual-Page-1-Picture


Comments (1)

Gravatar
New
says...
thanks very helpfull

Add Comment

* Required information
1000
Captcha Image