Equipment information
Agilent 4291B Analyzer
Manufacturer:
No picture available!
Maybe you can upload a pic for the
Agilent 4291B ?
If you have any other manuals for the
Agilent 4291B you can upload the files here .
Model:
4291B
Date:
2001
Category:
Group:
Description:
RF Impedance/Material Analyzer
Manual Type:
Service Manual
Pages:
350
Size:
3.91 Mbytes (4098048 Bytes)
Language:
english
Revision:
4
Manual-ID:
04291-90111
Date:
2001 03 01
Quality:
Electronic document, no scan, very well readable.
Upload date:
2019 01 08
MD5:
1055193dec23c58ce631b203da20abd8
Downloads:
510
Information
This manual consists of the chapters and appendices listed below. They are
divided by tabs.
Performance Tests. Provides the procedures required to performance test
the Analyzer.
Adjustments and Correction Constants . Provides procedures for adjusting
the Analyzer
after repair or replacement of an assembly. Some of the adjustments update
the correction
constants stored in the EEPROM on the A1 CPU. The correction constants are
updated by
using the adjustment program (PN 04291-65003).
Overall Troubleshooting. Outlines the Analyzer troubleshooting, and provides
troubleshooting
procedures to isolate the faulty functional group. Faulty assembly isolation
procedures for
each functional group are contained in the remaining trouble shooting
chapters.
Power supply Troubleshooting
Digital Control Troubleshooting
Source Troubleshooting
Receiver Troubleshooting
Transducer Troubleshooting
Service Key Menus. Documents the functions of the menus accessed from 4
System
5,
SERVICE MENU . These menus allow you to test, verify, adjust, control, and
troubleshoot the
analyzer. GPIB service mnemonics are included.
Theory of Operation. Explains the overall operation of the analyzer, the
division into
functional groups, and the operation of each functional group.
Replaceable Parts. Provides part numbers and illustrations of the replaceable
assemblies and
miscellaneous chassis parts, together with the ordering information.
Replacement Procedures. Provides procedures to disassemble portions of the
Analyzer when
certain assemblies have to be replaced.
Post-Repair Procedures. Contains the table of related service procedures.
This is a table of
adjustments and verification procedures that must be performed after repair
or replacement
of each assembly.
Appendices. Contains the manual changes information (required to make this
manual
compatible with earlier shipment configurations of the analyzer) and the
power requirements.
Messages. Contains the service related error message list.