Información sobre equipo

Schiller Medical SA FRED Easy Desfibrilador
Fabricante:
Schiller Medical SA
Modelo: FRED Easy
Fecha: 2003
Categoría: Equipo Médico y Biomédico
Grupo: Desfibrilador
Descripción: Semiautomatic defibrillator (PAD)
Información:

Device operation FRED easy® is a battery-operated semiautomatic Defibrillator that provides biphasic defibrillation pulses. Defibrillation takes place by means of single-use adhesive Electrodes through which the ECG signals required for the analysis are also collected. Adhesive Electrodes are available for children and adults. The device recognises the type of electrode applied and selects the defibrillation energy values accordingly. The user is provided with written and audio instructions (display and loudspeaker) relating to the use of the device. The power is supplied by plug-in disposable lithium batteries. Their capacity is sufficient for - 200 shocks at the maximum power rating or - use of the monitor for seven hours (cyclical, 30 minutes on, 30 minutes off) or - 5 years standing by. As soon as a battery is put in place in the FRED easy® device, it runs a self test to check the status of the device and battery. If the device does not find any fault, the green indicator begins to flash to show that it is ready to operate and the display disappears. Likewise, the device runs a self test each time it is switched on. If, during the test, the device finds an error: - it issues an audio alarm, - the green indicator does not flash The alarm signal rings till the battery is completely discharged. Key error message is displayed. is used to repeat the self test and the Also, the device runs a self test after every seven days. The test is announced by a beep. If, during the test, the device finds an error: - it issues an audio alarm, - the green indicator does not flash If you press key the corresponding error message is displayed. In that case, you must replace the battery and repeat the test. Depending on the test result, the error message will disappear or another message will be displayed.

Estos manuales están disponibles para el equipo anterior:

Tipo de Manual:: Manual de servicio Schiller-10275-Manual-Page-1-Picture
Páginas:: 95
Tamaño:: 2.32 Mbytes (2428750 Bytes)
Idioma: Inglés
Revisión: 1.00
Número de identificación: 0-48-0029
Fecha: 01 mayo 2003
Calidad: Documento electrónico, sin análisis, muy bien legible.
Añadir fecha:
MD5: cb3d6925db0bd4d54a649b5b9c062324
Descargas: 43 desde 10 febrero 2018
Información:

1. Operation_________________________________________________________ 1-1 1.1 Display and controls _____________________________________________________ 1-1 1.2 Explanation of symbols used ______________________________________________ 1-2 1.3 Device operation ________________________________________________________ 1-3 1.4 Defibrillation procedure ___________________________________________________ 1-3 1.5 Recording (optional) _____________________________________________________ 1-6 1.6 Technical specifications __________________________________________________ 1-7 2. Testing and maintenance ____________________________________________ 2-1 2.1 Functional testing _______________________________________________________ 2-1 2.2 Systematic verification before use __________________________________________ 2-3 2.3 Cleaning and disinfecting _________________________________________________ 2-3 3. Troubleshooting____________________________________________________ 3-1 4. Replacement of parts _______________________________________________ 4-1 4.1 Device disassembly procedure _____________________________________________ 4-2 4.2 Working on the CPU circuit________________________________________________ 4-3 4.3 Working on the LCD display _______________________________________________ 4-3 4.4 Working on the DEFI circuit _______________________________________________ 4-3 4.5 Replacing the high-voltage capacitor ________________________________________ 4-3 4.6 Reassembling the device _________________________________________________ 4-5 4.7 Replacement of parts ____________________________________________________ 4-5 5. Technical description of boards________________________________________ 5-1 5.1 FRED Easy ____________________________________________________________ 5-1 5.2 CPU (part no. WSM0005A)________________________________________________ 5-3 5.3 Defibrillator, part no. WSM0008A __________________________________________ 5-28 5.3.1 Driving the high-voltage capacitor charge_______________________________________ 5-33 5.3.2 Chronograms ____________________________________________________________ 5-40 5.3.3 Description of signals ______________________________________________________ 5-43 5.3.4 ECG preamplifier _________________________________________________________ 5-43 5.3.5 Defibrillator control circuit ___________________________________________________ 5-44 5.3.6 High-voltage circuit ________________________________________________________ 5-48 5.3.7 IGBT control circuit ________________________________________________________ 5-50 5.3.8 Fault detection circuit ______________________________________________________ 5-52 6. Device modifications ________________________________________________ 6-1 6.1 Definition ______________________________________________________________ 6-1 6.2 CPU circuit ____________________________________________________________ 6-1 6.3 DEFI circuit ____________________________________________________________ 6-1 7. Diagrams and layout drawings ________________________________________ 7-1 7.1 CPU circuit WSM0005A __________________________________________________ 7-1 7.2 Defi circuit WSM0008A ___________________________________________________ 7-4

Schiller-10275-Manual-Page-1-Picture


Comments (0)

No comments yet. Be the first!

Add Comment

* Required information
1000
Captcha Image
Powered by Commentics