Información sobre equipo

Emco 1061-04 Test Set
Fabricante:
Emco
Modelo: 1061-04
Fecha:
Categoría: Los instrumentos de medición
Grupo: Test Set
Descripción: Equipment Testing Turntabl
Información:

SYSTEM DESCRIPTION The Emco Equipment Testing Turntable is designed for use in compliance testing. Rotation is provided by a drive system which includes an electric motor, electric brake and a drive gear reduction arrangement. Approximately 370 degrees of rotation are provided before travel is stopped by mechanically actuated limit switches, which are preset at the factory. The base of the turntable is constructed of marine grade plywood, the platform is fabricated of either marine grade plywood covered with formica or solid 3/8" steel plate, depending on the model chosen. Both platforms are designed to provide strength and rigidity and resist degradation due to harsh environments. The drive unit is attached to the base section, as is the phenolic support and the stationary member of the center bearing. In addition to mechanical limits, the controller has the capability to move the table a full 370 degrees of rotation as well as any smaller arc of the circle. For further explanation of controller functions and programming, see the manual section entitled "Controller Operation and Programming".

Estos manuales están disponibles para el equipo anterior:

Tipo de Manual:: Servicio y Manual del usuario Emco-9924-Manual-Page-1-Picture
Páginas:: 30
Tamaño:: 990.42 Kbytes (1014187 Bytes)
Idioma: Inglés
Revisión: 7
Número de identificación: 399011
Fecha:
Calidad: Documento Scaneds, en parte leyendo mal, no parcialmente legible.
Añadir fecha:
MD5: 43c2fcd0a1ff537b5b3c339c07f6c791
Descargas: 271 desde 23 diciembre 2017
Información:

Emco-9924-Manual-Page-1-Picture