Equipment information
Electronic Navigation Industries 310L Amplifier
Manufacturer:
Image 1 of 1
If you have any other photos or manuals for the
Electronic Navigation Industries 310L you can upload the files here .
Model:
310L
Date:
Category:
Group:
Description:
BROADBAND RF POWER AMPLIFIER
Information
The Model 31OL is a broadband solid state power Amplifier
covering the frequency range of 250 KHz to 110 MHz.
Over 10 watts of RF power can be produced at the output,
with low harmonic and intermodulation distortion. A highly
linear Class A design, the Model 31 OL will amplify inputs
of AM,FM,
SSB, pulse and other complex modulations, with minimum
distortion. The 50 dB gain of the unit permits it to be
driven to its full power output by any signal or sweep
generator capable of supplying a minimum -10 dBM (.07 volts
RMS) signal level into its 50 ohm input. Virtually all
commercial signal and sweep generators are capable of
supplying this signal.
The Model 31OL operates over its entire bandwidth without
tuning or other adjustments. It is capable of supplying
useful power output up 150 MHz, at reduced gain.
This unit is unconditionally stable and will not oscillate
for any possible combination of source and load impedances.
It is protected against failure due to output load mismatch
and/or overdrive.
The Model 310L will withstand a +25 dB overdrive (input
signal of +15 dBM) for all output load conditions including
both short and open circuit loads.
Output RF voltage level, as well as power output into 50
ohms, is monitored by a front panel meter. An integral power
supply permits operation directly from the AC line.
Manual Type:
Datasheet
Pages:
6
Size:
418.03 Kbytes (428058 Bytes)
Language:
english
Revision:
Manual-ID:
Date:
Quality:
Scanned document, reading partly badly, partly not readable.
Upload date:
2016 01 25
MD5:
a626a17ebe34a6044670951100606259
Downloads:
596