Equipment information

Tektronix TDS 340A Oscilloscope
Manufacturer:
Model:
TDS 340A
Date:
Category:
Group:
Description:
Digital Real-Time Oscilloscope

Information

Tektronix TDS 340A, TDS 360, and TDS 380 oscilloscopes are digital signal processors and are superb tools for displaying and measuring waveforms. Their performance addresses the needs of both benchtop lab and portable applications with the following features: Two input channels, each with a record length of 1,000 samples and 8-bit vertical resolution. Both channels acquire waveforms simultaneously. 2 Gigasample/second maximum sample rate (TDS 380); 1 Gigasamples/ second maximum sample rate (TDS 360); 500 Megasamples/second maximum sample rate (TDS 340A). 400 MHz analog bandwidth and fastest time base setting of 1 ns/div (TDS 380); 200 MHz analog bandwidth and fastest time base setting of 2.5 ns/div (TDS 360); 100 MHz analog bandwidth and fastest time base setting of 5 ns/div (TDS 340A). A full complement of advanced functions including on-screen readout, AUTOSET, cursors, continuously updated automatic measurements, and FFT. Waveform averaging, waveform enveloping, and hardware peak detection. Floppy disk drive for mass storage of waveforms, setups, and hard copies. A unique graphical user Interface (GUI) and a logical front-panel layout which combine to deliver the standard in usability pioneered by the TDS family of oscilloscopes.

show more

User Manual
Manual Type:
User Manual
Pages:
266
Size:
950.09 Kbytes (972897 Bytes)
Language:
english
Revision:
Manual-ID:
070-9442-02
Date:
Quality:
Electronic document, no scan, very well readable.
Upload date:
18 June 2011
MD5:
0c923f309bbe98b5996836206ce95c94
Downloads:
1717

Information

Programmer Manual

show more

User Manual
Manual Type:
User Manual
Pages:
164
Size:
1.15 Mbytes (1205444 Bytes)
Language:
english
Revision:
Manual-ID:
070-9459-04
Date:
01 January 1995
Quality:
Electronic document, no scan, very well readable.
Upload date:
27 December 2017
MD5:
33c5824573681a0989657bd14e4566ed
Downloads:
693

Information

This manual provides user information for the TDS 300 Two-Channel Digital Real-Time Oscilloscopes. The manual contains the following chapters and appendices: Getting Started contains a brief product description; information needed to power on the oscilloscope, and a brief procedure to verify that it functions. Operating Basics contains user interface, probe, and autoset information. Reference contains task-oriented descriptions of Oscilloscope features. The features are described in order from most basic to more specialized. Appendix A: Specifications contains typical, nominal, and warranted specifications for the Oscilloscope. Appendix B: Performance Verification contains procedures you can use to verify that Oscilloscope is operating within warranted specifications. Appendix C: Options and Accessories describes other products that are useful with the Oscilloscope. Appendix D: General Care and Cleaning describes how to care for and clean the Oscilloscope. Glossary contains a glossary of terms. Index contains a full index.

show more

Service Manual
Manual Type:
Service Manual
Pages:
152
Size:
1.59 Mbytes (1666753 Bytes)
Language:
english
Revision:
Manual-ID:
Date:
Quality:
Electronic document, no scan, very well readable.
Upload date:
25 April 2013
MD5:
51bbf57c643b7e1ad464ce8f8125de3a
Downloads:
1482

Information

This service manual provides service information for the TDS 340A, TDS 360, and TDS 380 Digitizing Oscilloscopes. This manual is divided into Chapters such as Specifications and Theory of Operation. Further, it is divided into subsections such as Product Description and Removal and Installation Procedures. Sections containing procedures also contain introductions to those procedures. Be sure to read these introductions because they provide information needed to do the service correctly and efficiently. The following is a brief description of each manual chapter.  Specifications contains a product description of the digitizing Oscilloscope and tables of the characteristics and descriptions that apply to it.  Operating Information includes general information and operating instructions at the level needed to safely power on and service this Oscilloscope.  Theory of Operation contains circuit descriptions that support general service and fault isolation down to the module level.  Performance Verification contains a collection of procedures for confirming that this digitizing Oscilloscope functions properly and meets warranted limits.  Adjustment Procedures contains a collection of procedures for adjusting this digitizing Oscilloscope to meet warranted limits.  Maintenance contains information and procedures for doing preventive and corrective maintenance of the digitizing Oscilloscope. Instructions for cleaning, for module removal and installation, and for fault isolation to a module are found here.  Options contains information on the factory-installed options that may be present in your Oscilloscope.  Electrical Parts List contains a statement referring you to the Mechanical Parts List, where both electrical and mechanical modules are listed.  Diagrams contains a statement referring you to the Theory of Operation Chapter, where module-level block diagrams are listed.  Mechanical Parts List includes a table of all replaceable modules, their descriptions, and their Tektronix part numbers.

show more

Service and User Manual
Manual Type:
Service and User Manual
Pages:
288
Size:
3.81 Mbytes (3991006 Bytes)
Language:
english
Revision:
Manual-ID:
070-9436-04
Date:
Quality:
Electronic document, no scan, very well readable.
Upload date:
27 December 2017
MD5:
c622904913262cff8434086f6ce08ff8
Downloads:
756

Information

Technical Reference This technical reference manual provides service information for the TDS 340A, TDS 360, and TDS 380 Digitizing Oscilloscopes. This manual is divided into Chapters such as Specifications and Theory of Operation. Further, it is divided into subsections such as Product Description and Removal and Installation Procedures. Sections containing procedures also contain introductions to those procedures. Be sure to read these introductions because they provide information needed to do the service correctly and efficiently. The following is a brief description of each manual chapter. Specifications contains a product description of the digitizing Oscilloscope and tables of the characteristics and descriptions that apply to it. Operating Information includes general information and operating instruc- tions at the level needed to safely power on and service this Oscilloscope. Theory of Operation contains circuit descriptions that support general service and fault isolation down to the module level. Performance Verification contains a collection of procedures for confirming that this digitizing Oscilloscope functions properly and meets warranted limits. Adjustment Procedures contains a collection of procedures for adjusting this digitizing Oscilloscope to meet warranted limits. Maintenance contains information and procedures for doing preventive and corrective maintenance of the digitizing Oscilloscope. Instructions for cleaning, for module removal and installation, and for fault isolation to a module are found here. Options contains information on the factory-installed options that may be present in your Oscilloscope. Electrical Parts List contains a component-level list grouped by board assembly.

show more

Add Comment

* Required information
1000
Captcha Image

Comments

No comments yet. Be the first!