Fluke 99B ScopeMeter
No picture available!
Maybe you can upload a pic for the
Fluke 99B ?
If you have any other manuals for the
Fluke 99B you can upload the files here .
SCOPEMETER TEST TOOL FEATURES Your ScopeMeter
test tool combines the capabilities of an easy-to-use digital storage Oscilloscope
with the versatility of a Digital multimeter
. When you select a measurement function, the test tool automatically chooses the best setup to analyze and compare complex waveforms, or simply to read voltage levels. ScopeMeter
Features • Rugged, dual-input Oscilloscope
and high bandwidth true RMS Meter in one instrument. • Four hours of battery operation. • Allows you to measure floating from mains with the 600V insulated probes. • Optically isolated PC/Printer Interface
. • Information key to access on line information on all functions. • Separate memories for storage of waveforms, instrument setups, and screens. Scope Capabilities • Triggering includes external triggering and TV line selector. • Five giga samples in recurrent mode for full resolution display of high frequency signals. (2.5 giga samples for Fluke
92B and 96B) • Continuous Auto Set for hands-free probing without adjustments to test the tool. • MIN MAX Envelope mode for recording changes in waveforms. • ScopeRecordTM allows you to capture and view waveforms spanning 120 screens 92B . Digital multimeter
Capabilities • 3000 count, 5 MHz bandwidth true RMS. • Each Meter reading is accompanied by a Scope display. • Displays up to four simultaneous readings. • MIN MAX TrendPlot automatically graphs meter readings and shows minimum and maximum peak values with the actual or relative time.
2.16 Mbytes (2265767 Bytes)
Rev. 4 1/99
Electronic document, no scan, very well readable.
2008 01 14
ABOUT THIS MANUAL
Chapter 1 Introducing the ScopeMeter Test Tool
This chapter introduces features and capabilities of your
Chapter 2 Getting Started
This chapter provides a 15-minute demonstration intended
for those who are not familiar with the ScopeMeter
Chapter 3 Making Measurements
This chapter explores all measurements and specifies the
use of the direct Measure Menu key. At any time, you can
choose over 30 measurements to get an immediate
reading on the display.
Chapter 4 Using the Dual Display Mode
This chapter addresses the use of four Dual Display Mode
Functions of the ScopeMeter
test tool: , , , and
. You will learn how to set up the test tool for ac and
dc voltage measurements, diode tests, resistance
measurements, and trend plotting. Chapter 5 contains all
the Scope mode information.
Chapter 5 Using the Scope Mode
This chapter explores the specific use of the test tool as a
digital storage Oscilloscope
. You will learn how to make,
store, and compare measurements.
Chapter 6 Using Additional Capabilities
This chapter explores the additional capabilities available
with your ScopeMeter
test tool. The chapter covers
subjects, such as Scope measurements using the cursors,
saving and recalling screens, waveforms, or setups, and
making a hard copy on your printer.
Chapter 7 Measuring Examples
This chapter outlines step-by-step procedures necessary
to make some typical measurements.
Chapter 8 User Maintenance
This chapter describes the cleaning of the ScopeMeter
tool and proper use and replacement of the battery pack.
calibration is also covered here.
Chapter 9 Appendixes
A. Specifications: Operating characteristics.
B. Parts and Accessories: Model numbers and replacement
codes for all parts and Accessories
delivered with your
C. PM8907 Power Adapter/ Battery Charger.
D. Warranty Information and Service Centers: Warranty
terms and Service Center addresses.
E. Terminology: Glossary of special terms.