|Tektronix TDS6000 Oscilloscope|
|Description:||Digital Storage Oscilloscope|
Acquisition Features Separate Digitizers. Ensure accurate timing measurements with separate digitizers for each channel. Acquisition on multiple channels is always concurrent. The digitizers can also be combined to yield a higher sample rate on a single channel. Long Record Lengths. Record lengths from 125,000 points when using channel 1 with 2 or channel 3 with 4, or any three channels, or all 4 channels. Up to 250,000 points when using channel 1 with 3, channel 1 with 4, channel 2 with 3, or channel 2 with 4, or any single channel. Peak Detect Acquisition Mode. See pulses as narrow as 50 ps even at the slower time base settings. Peak detect helps you see noise and glitches in your signal. Acquisition Control. Acquire continuously or set up to capture single shot acquisitions. Enable or disable optional acquisition features such as equivalent time. Horizontal Delay. Use delay when you want to acquire a signal at a significant time interval after the trigger point. Toggle delay on and off to quickly compare the signal at two different points in time. SignalProcessing Features Average, Envelope, and Hi Res Acquisition. Use Average acquisition mode to remove uncorrelated noise from your signal. Use Envelope to capture and display the maximum variation of the signal. Use Hi Res to increase vertical resolution for lower bandwidth signals. Waveform Math. Set up simple math waveforms using the basic arithmetic functions or create more advanced math waveforms using the math expression editor. Waveform expressions can even contain measurement results and other math waveforms. Spectral Analysis. Display spectral magnitude and phase waveforms based on your time-domain acquisitions. Control the Oscilloscope using the traditional spectrum Analyzer controls such as span and center frequency. Display Features Color LCD Display. Identify and differentiate waveforms easily with color coding. Waveforms, readouts, and inputs are color matched to increase productivity and reduce operating errors. Zoom. To take advantage of the full resolution of the Oscilloscope you can zoom in on a waveform to see the fine details. Both vertical and horizontal zoom functions are available. Measurement Features Cursors. Use cursors to take simple voltage, time, and frequency measurements. Automatic Measurements. Choose from a large palette of amplitude, time, and histogram measurements. You can customize the measurements by changing reference levels or by adding measurement gating. Trigger Features Simple and Advanced Trigger Types. Choose simple edge trigger or choose from eight advanced trigger types to help you capture a specific signal fault or event. Dual Triggers. Use the A (main) trigger system alone or add the B trigger to capture more complex events. You can use the A and B triggers together to set up a delay-by-time or delay-by-events trigger condition. Convenience Features Autoset. Use Autoset to quickly set up the vertical, horizontal, and trigger controls for a usable display. Touch Screen Interface. You can operate all Oscilloscope functions (except the power switch) from the touch screen Interface. If convenient, you can also install a mouse and keyboard to use the Interface. Toolbar or Menu Bar. You can choose a toolbar operating mode that is optimized for use with the touch screen, or a PC-style menu-bar operating mode that is optimized for use with a mouse. Open Desktop. The Oscilloscope is built on a Microsoft Windows Software platform; the Oscilloscope application program starts automatically when you apply power to the instrument. You can minimize the Oscilloscope application and take full advantage of the built-in PC to run other applications. Moving waveform images and data into other applications is as simple as a copy/paste operation. Dedicated Front Panel Controls. The front panel contains knobs and buttons to provide immediate access to the most common Oscilloscope controls. Separate vertical controls are provided for each channel. The same functions are also available through the screen Interface. Data Storage and I/O. The Oscilloscope has a removeable hard disk drive, a CD-RW drive, and a floppy disk drive that can be used for storage and retrieval of data. The Oscilloscope has GPIB, USB, Centronics, and Ethernet ports for input and output to other devices. Online Help. The Oscilloscope has a complete online help system that covers all its features. The help system is context sensitive; help for the displayed control window is automatically shown if you touch the help button. Graphical aids in the help windows assist you in getting to the information you need. You can also access the help topics through a table of contents or index.
These manuals are available for the above equipment:
|Tektronix -- TDS6000 -- Service Manual|
|Manual Type:||Service Manual|
|Size:||4.28 Mbytes (4489976 Bytes)|
|Date:||01 January 2003|
|Quality:||Electronic document, no scan, very well readable.|
|Upload date:||29 July 2020|
|Downloads:||15 since 29 July 2020|
This document applies to firmware version 1.00 and above. List of Figures ... v List of Tables ... viii General Safety Summary ... xi Service Safety Summary ... xiii Preface ... xv Manual Structure ... xv Manual Conventions ... xv Related Documentation ... xvi Contacting Tektronix ... xvi Specifications Product and Feature Description ... 1-1 Acquisition Features ... 1-2 Signal Processing Features ... 1-2 Display Features ... 1-2 Measurement Features ... 1-3 Trigger Features ... 1-3 Convenience Features ... 1-3 Specification Tables ... 1-4 Operating Information Installation ... 2-1 Before You Start ... 2-1 Environmental Considerations ... 2-1 Connect the Peripherals ... 2-2 Power On the Instrument ... 2-4 Powering Off the Oscilloscope ... 2-5 Create an Emergency Startup Disk ... 2-5 Software Installation ... 2-6 Operating Information ... 2-7 Back Up User Files ... 2-7 User Interface Map ... 2-7 Front Panel Controls Map ... 2-9 Front Panel I/O Map ... 2-10 Instrument Diagnostics ... 2-10 Signal Path Compensation ... 2-11 Using the Online Help ... 2-11 Theory of Operation Logic Conventions ... 3-1 Module Overviews ... 3-1 General ... 3-1 Input Signal Path ... 3-1 Display Panel ... 3-2 Front Panel ... 3-2 Rear Panel ... 3-3 Low Voltage Power supply ... 3-3 Fans ... 3-3 Performance Verification Conventions ... 4-2 Brief Procedures ... 4-5 Self Tests ... 4-5 Verify Internal Adjustment, Self Compensation, and Diagnostics ... 4-5 Functional Tests ... 4-6 Verify All Input Channels ... 4-7 Verify the Time Base ... 4-11 Verify the A (Main) and B (Delayed) Trigger Systems ... 4-13 Verify the File System ... 4-15 Performance Tests ... 4-17 Prerequisites ... 4-17 Equipment Required ... 4-18 TDS6000 Test Records ... 4-20 Signal Acquisition System Checks ... 4-29 Check DC Voltage Measurement Accuracy ... 4-29 Check Offset Accuracy ... 4-33 Check Maximum Input Voltage ... 4-37 Check Analog Bandwidth ... 4-41 Check Delay Between Channels ... 4-46 Check Channel Isolation (Crosstalk) ... 4-50 Check Input Impedance ... 4-54 Time Base System Checks ... 4-56 Check Long-Term Sample Rate and Delay Time Accuracy and Reference ... 4-56 Check Delta Time Measurement Accuracy ... 4-60 Trigger System Checks ... 4-63 Check Time Accuracy for Pulse, Glitch, Timeout, and Width Triggering ... 4-63 Check Sensitivity, Edge Trigger, DC Coupled ... 4-66 Output Signal Checks ... 4-72 Check Outputs — CH 3 Signal Out and Aux Trigger Out ... 4-72 Check Probe Compensation Output ... 4-75 Serial Trigger Checks (Option ST Only) ... 4-79 Check Serial Trigger Baud Rate Limits and Word Recognizer Position Accuracy ... 4-79 Check Serial Trigger Clock Recovery Range ... 4-86 Sine Wave Generator Leveling Procedure ... 4-90 Adjustment Procedure Adjustment Procedures ... 5-1 Adjustment Interval ... 5-1 Adjustment After Repair ... 5-1 Maintenance Preventing ESD ... 6-1 Inspection and Cleaning ... 6-2 General Care ... 6-2 Interior Cleaning ... 6-2 Exterior Cleaning ... 6-2 Removal and Installation Procedures ... 6-7 Preparation ... 6-7 Procedures for External Modules ... 6-9 Procedures for Modules ... 6-21 Troubleshooting ... 6-53 Service Level ... 6-53 Check for Common Problems ... 6-53 Equipment Required ... 6-55 Fault Isolation Procedure ... 6-55 PPC and NLX PC Diagnostics ... 6-60 Software Updates ... 6-63 After Repair ... 6-63 BIOS Error Messages (Bali NLX) ... 6-64 BIOS Error Messages (Radisys NLX) ... 6-65 BIOS Beep Codes (Bali NLX) ... 6-68 BIOS Beep Codes (Radisys NLX) ... 6-69 Dip Switch Controls ... 6-69 Diagnostic LED ... 6-70 Troubleshooting Using Reset Circuits ... 6-72 Installing the Processor Board Serial Number ... 6-74 Update/Restore the NLX Board CMOS ... 6-75 Installing an Authorization Key ... 6-75 Hard Disk Drive Maintenance ... 6-75 Repackaging Instructions ... 6-77 Packaging ... 6-77 Shipping to the Service Center ... 6-77 Options Accessories ... 7-1 Options ... 7-3 Electrical Parts List Diagrams Symbols ... 9-1 Mechanical Parts List Parts Ordering Information ... 10-1 Module Servicing ... 10-1 Using the Replaceable Parts List ... 10-2 Abbreviations ... 10-2 Mfr. Code to Manufacturer Cross Index ... 10-2
|Start Free Download|
This policy contains information about your privacy. By posting, you are declaring that you understand this policy:
- Your name, rating, website address, town, country, state and comment will be publicly displayed if entered.
- Aside from the data entered into these form fields, other stored data about your comment will include:
- Your IP address (not displayed)
- The time/date of your submission (displayed)
- Your email address will not be shared. It is collected for only two reasons:
- Administrative purposes, should a need to contact you arise.
- To inform you of new comments, should you subscribe to receive notifications.
- A cookie may be set on your computer. This is used to remember your inputs. It will expire by itself.
This policy is subject to change at any time and without notice.
These terms and conditions contain rules about posting comments. By submitting a comment, you are declaring that you agree with these rules:
- Although the administrator will attempt to moderate comments, it is impossible for every comment to have been moderated at any given time.
- You acknowledge that all comments express the views and opinions of the original author and not those of the administrator.
- You agree not to post any material which is knowingly false, obscene, hateful, threatening, harassing or invasive of a person's privacy.
- The administrator has the right to edit, move or remove any comment for any reason and without notice.
Failure to comply with these rules may result in being banned from further commenting.
These terms and conditions are subject to change at any time and without notice.