Equipment information

Systron Donner 6016 Frequency counter
Manufacturer:
Systron Donner
Model: 6016
Date: 1972
Category: Measurement instruments
Group: Frequency counter
Description: Microwave Frequency Counter
Information:

The Systron-Donner Model 6016 Frequency Counter automatically measures continuous-wave (CW) and amplitude-modulated (AM) frequencies from 20 Hz to 18 GHz. The ACTO* (Automatic Computing Transfer Oscillator) technique is used in this Counter which eliminates any calculations or adjustments by the operator when measuring microwave inputs. A single BNC input connector accepts frequencies from 20 Hz to 200 MHz with 10 mV rms sensitivity and 1 Mft input impedance. Frequencies from 200 MHz to 18 GHz are applied to the type "N" connector; and, one of two ranges, 200 MHz to 3 GHz or 3 GHz to 18 GHz, can be selected from the front panel or via remote input. A wide choice of high-stability oscillators, complete remote programming, and BCD output are a few of the standard options available.

These manuals are available for the above equipment:

Manual Type: Service and User Manual SystronDonner-12196-Manual-Page-1-Picture
Pages: 156
Size: 4.78 Mbytes (5013484 Bytes)
Language: english
Revision:
Manual-ID/Number:
Date: 01 January 1972
Quality: Scanned document, reading partly badly, partly not readable.
Upload date:
MD5: 0bdc160507991f812df729023294cd4d
Downloads: 10 since 05 October 2019
Information:

Instruction Manual CHAPTER 1 - GENERAL INFORMATION 1.1 Introduction ... 1-1 1.2 Specifications ... 1-1 CHAPTER 2 - INSTALLATION 2.1 Introduction ... 2-1 2.2 Receiving Inspection ... 2-1 2.3 Installation ... 2-1 2.3.1 Power ... 2-1 2.3.2 Cooling ... 2-2 2.4 Reshipment ... 2-2 CHAPTER 3 - OPERATION 3.1 Introduction ... 3-1 3.2 Controls, Connectors, and Indicators . . 3-1 3.2.1 Front Panel ... 3-1 3.2.2 Rear Panel ... 3-3 3.3 Initial Turn-On and Operational Check . 3-3 3.4 Operating Procedures . ... 3-5 3.4.1 20 Hz to 200 MHz Range ... 3-5 3.4.2 200 MHz to 3 GHz Range CW Measurement . 3-6 3.4.3 3 GHz to 18 GHz Range CW Measurement . . 3-6 CHAPTER 4 - MAINTENANCE 4.1 Introduction ... 4-1 4.2 Test Equipment ... 4-1 4.3 Performance Verification ... 4-2 4.3.1 Test ... 4-2 4.3.2 200 MHz Range Frequency Measurements . . 4-3 4.3.3 3 GHz Range Frequency Measurements . . . 4-3 4.3.4 18 GHz Range Frequency Measurements . . 4-4 4.3.5 Recycle Rate and Reset ... 4-4 4.4 Calibration ... 4-5 4.4.1 Power Supply, A6 ... 4-5 4.4.2 200 MHz Amplifier and Decade, Al . . . . 4-5 4.4.3 ACTO Oscillator Board, A2 ... 4-6 4.4.4 ACTO Frequency Shifter, A3 ... 4-6 4.4.5 ACTO Video Amplifier, A4 ... 4-7 4.4.6 ACTO N Channel IF Amplifier, A5 ... 4-7 4.4.7 Sensitivity Adjustment, ACTO Mode . . . 4-8 4.4.8 1 MHz Oscillator, U4 ... 4-9 4.5 Routine Maintenance ... 4-9 4.6 Printed-Circuit Board Repair ... 4-10 CHAPTER 5 - PRINCIPLES OF OPERATION CHAPTER 5 - PRINCIPLES OF OPERATION (Cont'd) 5.2 Functional Description ... . . . 5-1 5.2.1 Direct Counting Mode ... 5-1 5.2.2 Automatic Computing Transfer Oscillator, ACTO* . ... 5-1 CHAPTER 6 - CIRCUIT DESCRIPTIONS,, DRAWINGS, AND PARTS LISTS 6.1 Introduction ... 6-1 6.2 Descriptions, and Drawings ... 6-1 33845 Model 6016 Final Cabinet Assembly . . . 6-2 Final Cabinet Assembly Parts List . . . 6-3 45150 Universal Chassis Assembly ... 6-4 45382 Test Assembly ... 6-5 45380 Front Panel Assembly ... 6-6 33909 Rear Panel Assembly ... 6-7 39240 Capacitor Chassis Assembly ... 6-8 33967 Mother Board P.C. Assembly ... 6-9 Final Assembly Parts List ... 6-10 45376 Model 6016 Block Diagram ... 6-15 33918 A1, 200 MHz Amplifier and Decade Circuit Description ... Al-1 Assembly ... Al-3 Schematic ... Al-4 Parts List ... Al-5 39220 A2, Oscillator Board Circuit Description A2-1 Assembly ... A2-3 Schematic ... A2-4 Parts List ... A2-5 33980 A3, Frequency Shifter Circuit Description ... A3-1 Assembly ... A3-2 Schematic ... A3-3 Parts List ... A3-4 33973 A4, Video Amplifier Circuit Description. A4-1 Assembly ... A4-3 Schematic ... A4-4 Parts List ... A4-5 33959 A5, N Channel IF Amplifier Circuit Description ... A5-1 Assembly ... A5-2 Schematic ... A5-3 CHAPTER 6 - CIRCUIT DESCRIPTIONS, DRAWINGS, AND PARTS LISTS (Cont'd) 45374 A6, Power supply Circuit Description . . A6-1 Assembly ... A6-2 Schematic ... A6-3 Parts List ... A6-4 33941 A7, N Computer and Time Base Circuit Description ... A7-1 Assembly ... A7-2 Schematic ... A7-3 Parts List ... A7-4 339 37 A8, Programming Board (Standard) Circuit Description ... A8-1 Assembly ... A8-2 Schematic ... A8-3 Parts List ... A8-4 45371 A9, Readout Board Circuit Description . A9-1 Assembly ... A9-2 Schematic ... A9-3 Parts List ... A9-4 45374 All, Diode Board Circuit Description . . All-1 Assembly ... All-2 Parts List ... All-3 39035 Ul, Power Divider Circuit Description. . Ul-1 39796 U2,U3 Mixer Circuit Description ... U2,3-l Assembly ... U2,3-2 Schematic ... U2,3-3 Parts List ... U2,3-4 CHAPTER 7 - OPTIONS AND MODIFICATIONS 7.1 Introduction ... 7-1 45301 Option 11,12,13, 3 MHz Oscillator Circuit Description ... OPT 11,12,13-1 Final Assembly ... OPT 11,12,13-2 Assembly ... OPT 11,12,13-3 Schematic ... OPT 11,12,13-4 Option 11 Parts List . ... OPT 11,12,13-5 Option 12 Parts List ... OPT 11,12,13-6CHAPTER 7 - OPTIONS AND MODIFICATIONS (Cont'd) 45499 Option 17, BCD Output Circuit Description ... OPT 17-1 Final Assembly ... OPT 17-3 Assembly ... OPT 17-4 Schematic ... OPT 17-5 Parts List ... OPT 17-6 45512 Option 20, Programming Board (Binary Remote) Circuit Description OPT 20-1 Final Assembly ... OPT 20-2 Assembly ... OPT 20-3 Schematic ... OPT 20-4 Parts List ... OPT 20-5 45514 Option 21, Programming Board (Single Line* Remote) Circuit Description ... OPT 21-1 Final Assembly ... OPT 21-2 Assembly ... OPT 21-3 Schematic ... OPT 21-4 Parts List ... OPT 21-5 Option 13 Parts List ... OPT 11,12,13-7 3 MHz Oscillator Parts List . . . OPT 11,12,13-8 Parts List ... A5-4 5.1 Introduction ... 5-1

SystronDonner-12196-Manual-Page-1-Picture


Comments (0)

No comments yet. Be the first!

Add Comment

* Required information
1000
Captcha Image