Tektronix SPG300 Generator
Manufacturer:
No picture available!
Maybe you can upload a pic for the
Tektronix SPG300 ?
If you have any other manuals for the
Tektronix SPG300 you can upload the files here .
Model:
SPG300
Date:
2004
Category:
Group:
Description:
Sync Pulse Generator
Information
The
SPG600 and
SPG300 Sync Pulse Generators are designed for high stability
master sync operation. The sync pulse generators provide a wide range of accurate reference signals including analog video, analog black burst, serial digital video, serial digital black, and AES/EBU digital audio.
The sync pulse
Generator features include:
High stability internal reference
Genlocks to the following signals:
NTSC/PAL black burst signal
1, 5, 10 MHz, and NTSC/PAL Fsc CW signals
Serial digital video signal outputs
AES/EBU serial digital audio outputs (XLR and BNC)
Overlay a logo or ID text on the color bars or test signal
Up to 16 channels of embedded audio
48 kHz word clock output
GPI (general purpose interface) for error status report and user preset
Ethernet (100 BASE-T)
Interface remote control
Manual Type:
Service Manual
Pages:
176
Size:
5.26 Mbytes (5516205 Bytes)
Language:
english
Revision:
Manual-ID:
071-1342-03
Date:
2004 08 15
Quality:
Electronic document, no scan, very well readable.
Upload date:
2019 09 28
MD5:
95a979b2e4d0ee871cfa335660b4ce4c
Downloads:
566
Information
1. INTRODUCTION 1
2. SERVICE
NOTES ...
... 1
3. TEST EQUIPMENT REQUIRED FOR
SERVICING ... 2
4. AM ALIGNMENT PROCEDURE
... 2
5. FM ALIGNMENT PROCEDURE ...
...
... 3
6. POWER
TV Multimedia">Amplifier ADJUSTMENT
... 3
7. POWER SUPPLY
ADJUSTMENT ... 3
8. VOLTAGE CONVERSION FOR EUROPEAN
MODEL ... 4
9. FTZ REGULATION FOR EUROPE
... 4
10. MAJOR COMPONENT LOCATIONS
...
5
10.1 Front Panel Adjustment and Component Locations
...
5
10.2 Main Chassis Component Locations (Top View)
...
5
10.3 Rear Panel Adjustment and Component
Locations ... 6
10.4 Main Chassis Component Locations (Bottom View)
... 6
11. DIAGRAM AND COMPONENT LOCATIONS ...
... ... 7
11.1 FM & AM
TV Multimedia">Tuner Assembly (P200) Schematic Diagram and
Component Locations ... 7
11.2 Dial Lamp Assembly (PZ01) Schematic Diagram and
Component Locations ... 9
11.3 DLB-1 Socket Assembly (PK01) Schematic Diagram and
Component Locations ... 9^
11.4 Main Amp. & Power Supply Assembly (P700) Schematic
Diagram and Component Locations ... 10
11.5 Tone Amp. Assembly (PE01) Schematic Diagram and
Component Locations ... 13
11.6 FM Front End Assembly (PI00) Schematic Diagram and
Component Locations ... 14
11.7 EQ Amp. Assembly (P400) Schematic Diagram and Component
Locations ... 15
12. BLOCK
DIAGRAM ...
16
13. CONNECTION
DIAGRAMS ... ...
... 17
13.1 For U.S.A. & Canadian
Models ...
17
13.2 For European Model
...
19
14. SCHEMATIC DIAGRAMS
...
... ... 21
14.1 For U.S.A. & Canadian Models
...
21
14.2 For European Model
...
23
15. EXPLODED MECHANICAL DIAGRAMS ... ...
... ... 25
15.1 Cabinet
... 25
15.2 Chassis
... - ... 27
15.3 Rear Panel for U.S.A. & Canadian
Models ... 29
15.4. Rear Panel for European Model
... 29
16. PACKING MATERIAL EXPLODED VIEW
... ...
... 30
17. PARTS LIST
... 31
18. TECHNICAL SPECIFICATIONS ... ...
... 40
This service manual was prepared for use by Authorized
Warranty Stations and contains service information for
Marantz Model
2238B Stereophonic
TV Multimedia">Receiver.
Servicing information and voltage data included in this
manual are intended for use by the knowledgeable and
experienced technician only. All instructions should be read
carefully. No attempt should be made to proceed without a
good understanding of the operations in the
TV Multimedia">Receiver.
The parts list furnishes information by which replacement
parts may be ordered from the
Marantz Company. A simple
description is included for parts which can usually be
obtained through local suppliers.
Comments