Equipment information

Mindray VS-800 Monitoring System
Model: VS-800
Date: 2007
Category: Medical and Biomedical Equipment
Group: Monitoring System
Description: Vital Signs Monitor

This monitor is composed of a main unit, NIBP cuff, SpO2 sensor and TEMP probe. Note that some of the mentioned parts are optional and may not be found on your monitor. Functions This monitor has the following functions and features: SpO2 measurement: pulse oxygen saturation (SpO2), pulse rate (PR), and SpO 2 plethysmogram. NIBP measurement: systolic pressure (S), diastolic pressure (D), mean pressure (M), and pulse rate (PR). TEMP measurement: temperature (TEMP). Alarm: support visual/audible alarm and prompt message. Record: support the function of recording NIBP trend data and PLETH waveforms. Nurse call. Storage of trend data: support the function of storing up to 1200 groups of measured results. Powerful system menu. Large LED digit display. AdjustableLCD brightness and contrast. Network communication: support the function of being connected to the CMS or PC for data output or online upgrade. Rechargeable lead-acid battery or lithium battery.

These manuals are available for the above equipment:

Manual Type: User Manual Mindray-10242-Manual-Page-1-Picture
Pages: 166
Size: 1.78 Mbytes (1869862 Bytes)
Language: french
Date: 01 January 2007
Quality: Electronic document, no scan, very well readable.
Upload date:
MD5: 06cefcb79e19fb3cadb1099c732ca956
Downloads: 273 since 05 February 2018

Le présent manuel fournit les instructions nécessaires à l'utilisation du moniteur de signes vitaux VS-800 (ci-après appelé moniteur) conformément à ses fonctions et ses indications d'utilisation. Le respect des instructions fournies dans ce manuel est indispensable pour une application et une utilisation correctes de l'appareil, garantissant ainsi la sécurité des patients et des opérateurs. Ce manuel a été rédigé sur la base de la configuration la plus complète. Certaines parties de ce manuel peuvent par conséquent ne pas être applicables à votre moniteur. Pour toute question concernant votre configuration ou le moniteur, veuillez contacter notre service clientèle. Le présent manuel fait partie intégrante du moniteur et doit être conservé à proximité immédiate de ce dernier, de façon à toujours être facilement accessible en cas de besoin.


Manual Type: User Manual Mindray-10243-Manual-Page-1-Picture
Pages: 162
Size: 2.35 Mbytes (2460452 Bytes)
Language: english
Revision: 2.4
Manual-ID/Number: 6006-20-39437
Date: 01 January 2007
Quality: Electronic document, no scan, very well readable.
Upload date:
MD5: 2b2716dfd93bf7929bf55f1a9fe31661
Downloads: 1042 since 05 February 2018

This manual provides the instructions necessary to operate the VS-800 Vital Signs Monitor (hereinafter called as this monitor) in accordance with its function and intended use. Observance of this manual is a prerequisite for proper performance and correct operation, and ensures patient and operator safety. This manual is written based on the maximum configuration. Part of this manual may not apply to your monitor. If you have any question about the configuration of your monitor, please contact our Customer Service. This manual is an integral part of and should always be kept close to the monitor, so that it can be obtained conveniently when necessary.


Manual Type: Service Manual Mindray-10244-Manual-Page-1-Picture
Pages: 74
Size: 1.33 Mbytes (1396554 Bytes)
Language: english
Revision: 2.0
Manual-ID/Number: 6006-20-39439
Quality: Electronic document, no scan, very well readable.
Upload date:
MD5: defc1470042dee700934476756d17d72
Downloads: 256 since 05 February 2018

Chapter 1 Monitor Description ... 1-1 1.1 Intended Use ... 1-1 1.2 Environmental Specifications ... 1-1 Chapter 2 Principles of Operation ... 2-1 2.1 General ... 2-1 2.2 Hardware Description ... 2-2 2.3 Software Description ... 2-13 2.4 System parameters ... 2-17 Chapter 3 Chapter Specifications ... 3-1 3.1 Type of Monitor ... 3-1 3.2 Specifications of Monitor ... 3-1 Chapter 4 Machine Disassembly/assembly and troubleshooting ... 4-1 4.1 Disassembly/assembly Figure ... 4-1 4.2 Inter-board Connections ... 4-12 4.2 Troubleshooting ... 4-16 Chapter 5 Machine Test and Material List ... 5-1 5.1Test Procedure ... 5-1 5.2 Material List ... 5-3 5.3 NIBP Calibration Method ... 5-7 Chapter 6 Maintenance and Cleaning ... 6-1 6.1 Inspection ... 6-1 6.2 General Cleaning ... 6-2 6.3 Cleaning Solution ... 6-2 6.4 Disinfection ... 6-3 6.5 Contact Information for Maintenance and Technical Support ... 6-3


Comments (0)

No comments yet. Be the first!

Add Comment

* Required information
Captcha Image