Equipment information

Fluke 8502AT Digital multimeter
Manufacturer:
Model:
8502AT
Date:
1981
Category:
Group:
Description:

Information

The 8502AT is an 8502A that has been altered to operate at 400 Hz ±5% and has a Thermal True RMS Converter module installed. In addition the -02 Ohms Converter, -04 Calibration Memory, -05 IEEE Interface, and -08 A Isolator Options are included as standard. The Thermal True RMS Converter module allows the operator to measure the true rms value of an ac signal at accuracies of 50 ppm with a maximum response time of 6 seconds. This response time compares favorably with that of existing thermal transfer standards which can take up to 5 minutes to complete a measurement. Multimeter operation at 400 Hz results in readings that are 5% slower than the standard 60 Hz unit. The 5% slower readings are based on timing of 57 Hz which occurs when the input line frequencies are at 400 Hz ±5%.

show more

Service and User Manual Supplement
Manual Type:
Service and User Manual Supplement
Pages:
64
Size:
5.41 Mbytes (5673655 Bytes)
Language:
english
Revision:
Manual-ID:
577049
Date:
1981 07 01
Quality:
Scanned document, all readable.
Upload date:
2018 01 14
MD5:
04b4a2ab0b6b8fba26b8d422f514c75d
Downloads:
1005

Information

This addendum modifies the standard 8502A Instruction Manual to cover operations and servicing of the 8502A/AT Digital Multimeter. If no reference is made to a numbered paragraph, figure, or table, that item in the 8502A manual remains correct, except for the change in nomenclature.

show more