Equipment information

Anritsu Site Master S114C Analyzer
Manufacturer:
Model:
Site Master S114C
Date:
2002
Category:
Group:
Description:
Antenna, Cable and Spectrum Analyzer

Information

The Site Master is a hand held SWR/RL (standing wave ratio/return loss), and Distance-To-Fault (DTF) measurement instrument that includes a built-in synthesized signal source. All models include a keypad to enter data and a liquid crystal display (LCD) to provide graphic indications of SWR or RL over the selected frequency range and selected distance. The Site Master is capable of up to 2.5 hours of continuous operation from a fully charged field-replaceable battery and can be operated from a 12.5 dc source. Built-in energy conservation features can be used to extend battery life over an eight-hour work day. The Site Master is designed for measuring SWR, return loss, or cable insertion loss and locating faulty RF components in antenna systems. Power monitoring is available as an op- tion. Site Master models S114C and S332C include spectrum analysis capability. The displayed trace can be scaled or enhanced with frequency markers or limit lines. A menu option provides for an audible “beep” when the limit value is exceeded. To permit use in low-light environments, the LCD can be back lit using a front panel key.

show more

User Manual
Manual Type:
User Manual
Pages:
120
Size:
1.03 Mbytes (1082215 Bytes)
Language:
english
Revision:
F
Manual-ID:
10580-00060
Date:
01 June 2002
Quality:
Electronic document, no scan, very well readable.
Upload date:
15 October 2017
MD5:
a475eb99e0c1b4ef47d09d17b7ed6e87
Downloads:
969

Information

Chapter 1 - General Information Introduction ... . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Description ... . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Standard Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Options ... . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 Printers ... . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 Performance Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4 Preventive Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6 Calibration ... . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6 InstaCal Module ... . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-7 ESD Precautions ... . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-7 Chapter 2 - Functions and Operations Introduction ... . ... 2-1 Test Connector Panel ... . ... 2-1 12.5-15VDC (1100 mA) ... . ... 2-1 Battery Charging ... . ... 2-1 External Power ... . ... 2-1 Serial Interface ... . ... 2-1 RF Out ... . ... 2-1 RF In ... . ... 2-1 RF Detector ... . ... 2-1 Front Panel Overview ... . ... 2-2 Function Hard Keys ... . ... 2-3 MODE ... . ... 2-3 FREQ/DIST ... . ... 2-3 AMPLITUDE ... . ... 2-3 SWEEP ... . ... 2-3 Keypad Hard Keys ... . ... 2-4 Soft Keys ... . ... 2-6 FREQ/DIST ... . ... 2-10 Frequency Menu ... . ... 2-10 Distance Menu ... . ... 2-10 Distance Sub-Menu ... . ... 2-10 AMPLITUDE ... . ... 2-12 Amplitude Menu ... . ... 2-12 SWEEP ... . ... 2-13 Sweep Menu ... . ... 2-13 MARKER ... . ... 2-15 LIMIT ... . ... 2-16 SYS ... . ... 2-17 Power Monitor Menu ... . ... 2-18 Symbols ... . ... 2-19 Self Test ... . . . . . . . . . . . . . . . 2-19 Error Codes ... . . . . . . . . . . . . . . . 2-19 Self Test Errors ... . . . . . . . . . . . . . . . 2-19 Range Errors ... . . . . . . . . . . . . . . . 2-21 InstaCal Error Messages ... . . . . . . . . . . . . . . . 2-22 Battery Information ... . . . . . . . . . . . . . . . 2-24 Charging a New Battery ... . . . . . . . . . . . . . . . 2-24 Charging the Battery in the Optional Charger. . . . . . . . . . . . . . . 2-24 Determining Remaining Battery Life ... . . . . . . . . . . . . . . . 2-25 Battery Life ... . . . . . . . . . . . . . . . 2-26 Important Battery Information ... . . . . . . . . . . . . . . . 2-27 Chapter 3 - Getting Started Introduction ... . ... 3-1 Power On Procedure ... . ... 3-1 Site Master Mode ... . ... 3-2 Selecting the Frequency or Distance ... . ... 3-2 Calibration ... . ... 3-2 Calibration Verification ... . ... 3-3 Manual Calibration Procedure ... . ... 3-4 InstaCal Module Verification ... . ... 3-5 InstaCal Module Calibration Procedure ... . ... 3-6 Calibration with the Test Port Extension Cable ... . ... 3-6 Setting the Scale ... . ... 3-7 Auto Scale ... . ... 3-7 Amplitude Scale ... . ... 3-7 Set the Distance and Cable Type ... . ... 3-7 Spectrum Analyzer Mode ... . ... 3-9 Selecting Spectrum Analyzer Mode ... . ... 3-9 Making a Measurement ... . ... 3-9 Selecting the Frequency ... . ... 3-9 Selecting the Span ... . ... 3-9 Selecting the Amplitude ... . ... 3-9 Selecting Bandwidth Parameters ... . ... 3-10 Selecting Sweep Parameters ... . ... 3-10 Adjusting Attenuator Settings ... . ... 3-11 Site Master and Spectrum Analyzer Modes ... . ... 3-12 Save and Recall a Setup ... . ... 3-12 Saving a Setup ... . ... 3-12 Recalling a Setup ... . ... 3-12 Save and Recall a Display ... . ... 3-12 Saving a Display ... . ... 3-12 Recalling a Display ... . ... 3-12 Changing the Units ... . ... 3-13 Changing the Display Language ... . ... 3-13 Adjusting Markers ... . ... 3-1 Adjusting Limits ... . ... 3-13 Adjusting the Display Contrast ... . ... 3-15 Setting the System Language ... . ... 3-15 Setting the System Impedance . . . . . . . . . . . . . . . . . . . . . . . . 3-15 Printing ... . . . . . . . . . . . . . . . . . . . . . . . . . 3-16 Printing a Screen ... . . . . . . . . . . . . . . . . . . . . . . . . . 3-16 Printer Switch Settings . . . . . . . . . . . . . . . . . . . . . . . . . . 3-17 Using the Soft Carrying Case. . . . . . . . . . . . . . . . . . . . . . . . . 3-18 Chapter 4 - Cable & Antenna Measurements Introduction ... . ... 4-1 Line Sweep Fundamentals ... . ... 4-1 Information Required for a Line Sweep ... . ... 4-2 Typical Line Sweep Test Procedures ... . ... 4-3 System Return Loss Measurement ... . ... 4-3 Insertion Loss Measurement ... . ... 4-4 Distance-To-Fault (DTF) Transmission Line Test ... . ... 4-8 Resolution ... . ... 4-9 Antenna Subsystem Return Loss Test ... . ... . . . . . . . . . . . . . . . . . . . . 5-1 Site Master Spectrum Analyzer Features . . . . . . . . . . . . . . . . . . . 5-3 AM/FM Modulation ... . . . . . . . . . . . . . . . . . . . . 5-3 Amplitude Modulation ... . . . . . . . . . . . . . . . . . . . . 5-3 Frequency Modulation ... . . . . . . . . . . . . . . . . . . . . 5-4 Field Strength Measurements ... . . . . . . . . . . . . . . . . . . . . 5-6 Creating a Spectral Mask ... . . . . . . . . . . . . . . . . . . . . 5-7 Trace Overlay ... . ... 5-9 Occupied Bandwidth ... . ... 5-10 Percent of Power Method ... . ... 5-10 XdB Down Method ... . ... 5-10 Required Equipment ... . ... 5-10 Procedure ... . ... 5-10 Channel Power Measurement ... . ... 5-12 GSM Channel Power Measurement ... . ... 5-12 Required Equipment ... . ... 5-12 Procedure ... . ... 5-13 Adjacent Channel Power Ratio ... . ... 5-15 GSM Adjacent Channel Power Measurement ... . ... 5-15 Required Equipment ... . ... 5-15 Procedure ... . ... 5-15 Measurement Applications ... . ... 5-17 Resolving Closely Spaced Signals ... . ... 5-17 Measurement of Two Signals Having Equal Amplitudes ... 5-19 Out-of-Band Spurious Emissions ... . ... 5-23 Out-of-Band Spurious Emission Measurement . . . . . . . . . . . . . . . 5-23 Required Equipment ... . . . . . . . . . . . . . . . . 5-23 Procedure ... . . . . . . . . . . . . . . . . 5-25 In-band Spurious Measurement ... . . . . . . . . . . . . . . . . 5-25 Required Equipment ... . . . . . . . . . . . . . . . . 5-25 Procedure ... . . . . . . . . . . . . . . . . 5-25 Field Strength ... . . . . . . . . . . . . . . . . 5-27 Required Equipment ... . . . . . . . . . . . . . . . . 5-27 Procedure ... . . . . . . . . . . . . . . . . 5-27 Antenna Calculations ... . . . . . . . . . . . . . . . . 5-28 Chapter 6 - Power Measurement Introduction ... . ... 6-1 Power Measurement ... . ... 6-1 Chapter 7 - Software Tools Introduction ... . . . . . . . . . . . . . . . . . . . . . . . . . 7-1 Features ... . . . . . . . . . . . . . . . . . . . . . . . . . 7-1 System Requirements ... . . . . . . . . . . . . . . . . . . . . . . . . . 7-1 Installation ... . . . . . . . . . . . . . . . . . . . . . . . . . 7-2 Communication Port Setting . . . . . . . . . . . . . . . . . . . . . . . . 7-2 Interface Cable Installation . . . . . . . . . . . . . . . . . . . . . . . . . 7-3 Using Software Tools ... . . . . . . . . . . . . . . . . . . . . . . . . . 7-3 Downloading Traces ... . . . . . . . . . . . . . . . . . . . . . . . . . 7-3 Plot Capture to the PC ... . . . . . . . . . . . . . . . . 7-4 Plot Upload to the Instrument ... . . . . . . . . . . . . . . . . 7-4 Plot Properties ... . . . . . . . . . . . . . . . . 7-4 Trace Overlay or Plot Overlay ... . . . . . . . . . . . . . . . . 7-5 Saving Traces ... . . . . . . . . . . . . . . . . 7-6 Creating a Database ... . . . . . . . . . . . . . . . . 7-7 Printing Formats ... . . . . . . . . . . . . . . . . 7-7 Entering Antenna Factors in Software Tools . . . . . . . . . . . . . . . . 7-7 Uploading Antenna Factors ... . . . . . . . . . . . . . . . . 7-8 Downloading Antennas ... . . . . . . . . . . . . . . . . 7-9 Appendix A - Reference Data Coaxial Cable Technical Data ... . ... A-1 Appendix B - Windowing Introduction ... . ... B-1 Examples ... . ... B-1

show more

Add Comment

* Required information
1000
Captcha Image

Comments

No comments yet. Be the first!