Equipment information

Advance Instruments J1/NA Generator
Manufacturer:
Advance Instruments
Model: J1/NA
Date:
Category: Measurement instruments
Group: Generator
Description: Low Frequency Signal Generator
Information:

The type J Signal Generators provide 1 watt output into 600 ohms, isolated from earth, over a frequency range of 15 c/s to 50 kc/s. A 5 ohm source is also provided giving a maximum output of not less than J watt. The instrument contains a resistance-capacitance bridge Oscillator feeding via a buffer valve into an output stage. The stabilization of the Oscillator and the feed-back on the output stage provide a constancy of output with varying frequency of ±1 db, with distortion at full power output more than 34 db down on fundamental (less than 2%). On the J1 the output is controlled by a calibrated potentiometer. The output voltage of the J2 is directly monitored by a first grade rectifier voltmeter. The standard models operate from power supplies of 105-125 volts, 210250 volts, A.C. only, 40-100 c/s. The J1/NA and J2/NA operate from power Supplies of 117 volts A.C. only, 25-60 c/s. The J1/E and J2/E operate from power supplies of 110-125 volts, 140-160 volts, and 220 volts A.C. only, 40-100c/s.

These manuals are available for the above equipment:

Manual Type: Service and User Manual Advance-9412-Manual-Page-1-Picture
Pages: 5
Size: 102.12 Kbytes (104574 Bytes)
Language: english
Revision:
Manual-ID/Number:
Date:
Quality: Scanned document, all readable.
Upload date:
MD5: 2c2a471070e6a70f93dfb1fecb10026a
Downloads: 1008 since 26 August 2017
Information:

Advance-9412-Manual-Page-1-Picture


Comments (0)

No comments yet. Be the first!

Add Comment

* Required information
1000
Captcha Image