Equipment information

Cornell Dubilier Electronics CDE CD-44 Antenna
Manufacturer:
Model:
CDE CD-44
Date:
Category:
Group:
Description:
Rotor System

Information

CD-44 rotor system is designed to accommodate light amateur and C.B. antennas with a maximum of 25 square feet of wind area. The CD-44 provides a full 360° range of rotation and a meter scale read out for accurate position indication, The CD-44 is built along the general lines of the original CDE type rotator. The weight of the upper mast and the Antenna is corned directly in line with the lower supporting mast. The motor, radial and thrust bearings, armature/disc brake., gear train, and indicating sensor are built into the elongated bell shaped cast aluminium housing. The CD-44 brake is a disc type built into the bottom portion of the motor armature. With the motor at rest, no power applied, the disc brake is engaged by virtue of the weight of the motor armature. When power is applied to the motor, the armature lifts approximately .80 mm (,031") and releases the disc brake. Terminal 2 on the control unit is not required when used with the CD-44 rotator. This terminal is for the brake solenoid when the control is used with a Ham-11 rotator However, we suggest attaching the #2 control wire to this terminal in order not to leave a loose wire which could short to another terminal.

show more

User Manual
Manual type:
User Manual
Pages:
8
Size:
1.43 Mbytes (1495066 Bytes)
Language:
english
Revision:
Manual-ID:
Date:
Quality:
Scanned document, reading partly badly, partly not readable.
Upload date:
01 August 2017
MD5:
db6767efea443104cfabe738fce3d397
Downloads:
517

Add Comment

* Required information
1000
Captcha Image

Comments

No comments yet. Be the first!