Equipment information
Power Designs Inc. 2005A Power supply
Manufacturer:
Image 1 of 1
If you have any other photos or manuals for the
Power Designs Inc. 2005A you can upload the files here .
Model:
2005A
Date:
1969
Category:
Group:
Description:
CALIBRATED PRECISION POWER SOURCE 0-20 VDC 0-500
Information
The Model 2005A is a calibrated precision power source
designed to supply extremely stable DC out- put with low
noise content. It represents a second generation version of
the Model 2005, and is the product of six years of field
experience with over 10,000 instruments. Performance and
reliability have been significantly improved without any
cost increase.
Two dual, concentric decade switches provide digital readout
of a selected output voltage to within 0.1 % of the chosen
value. A single-turn potentiometer with a resolution of 10
microvolts permits interpolation of the last place. A toggle
switch provides an additional digit in the 10to 20 volt range.
The output voltage of the supply may be remotely programmed
with an external resistance without loss of accuracy.
Provisions are included for remote sensing of the output
voltage at the load.
Compact and light, the Model 2005A is self-contained in a
portable housing designed for bench use, Panel adapters are
available for assembling one or two units in a standard
19-inch rack.
SERIAL NO:.
DESIGN FEATURES
® Decade voltage readout to five significant figures below
10 volts; to six significant figures above 10 volts.
Last-place interpolation by a potentiometer with a 1
millivolt range.
• Current limiting—maximum output may be limited to any
value below 500 mA with a front panel control.
• Limit indicator lamp on the front panel flashes when the
output of the supply is in the current-limited region.
• Self-restoring electronic overload and short-circuit
protection.
• Critical circuits and components maintained at constant
ambient temperature in a temperature-con- trolled. RFI-free
oven.
•Accurate remote programming at 1,000 ohms-per- volt.
® Front and rear access output terminals.
• Separately fused line and load circuits.
• 100-hour pre-aging of Power supply before test and
calibration.
• Individual calibration data furnished with each unit.
Manual Type:
Service and User Manual
Pages:
19
Size:
1.67 Mbytes (1754527 Bytes)
Language:
english
Revision:
Manual-ID:
Date:
Quality:
Scanned document, reading partly badly, partly not readable.
Upload date:
2015 10 02
MD5:
b1282fda70c3ef56744e9def296cf4e3
Downloads:
777