Equipment information

Fluke 726 Calibrator
Manufacturer:
Fluke
Model: 726
Date: 1998
Category: Measurement instruments
Group: Calibrator
Description: Multifunction Process Calibrator
Information:

Your Fluke 725 Multifunction Process Calibrator (referred to as “the calibrator”) is a handheld, battery-operated instrument that measures and sources electrical and physical parameters. See Table 1. In addition to the functions in Table 1, the Calibrator has the following features and functions: • A split-screen display. The upper display allows you to measure volts, current, and pressure only. The lower display allows you to measure and source volts, current, pressure, resistance temperature detectors, thermocouples, frequency, and ohms. • Calibrates a transmitter using the split-screen. • A thermocouple (TC) input/output terminal and internal isothermal block with automatic referencejunction temperature compensation. • Stores and recalls setups. • Manual stepping and automatic stepping and ramping. • Controls the Calibrator remotely from a PC running a terminal Emulator program.

These manuals are available for the above equipment:

Manual Type: Service Manual Fluke-6492-Manual-Page-1-Picture
Pages: 79
Size: 1.89 Mbytes (1978303 Bytes)
Language: english
Revision: 2
Manual-ID/Number: PN 667581
Date: February 2006
Quality: Electronic document, no scan, very well readable.
Upload date:
MD5: 5abf0bd5f323599cad06510518e760ae
Downloads: 605 since 29 November 2014
Information:

Calibration Manual Introduction ... 1 Contacting Fluke ... 1 Read First – Safety Information ... 2 International Symbols ... 3 Specifications ... 4 DC Voltage Measurement (724 and 725) ... 4 DC Voltage Measurement and Source (726) ... 4 DC Voltage Source (724 and 725) ... 4 DC mA Measurement and Source (724 and 725) (Measurement only for 724) ... 4 DC mA Measurement and Source (726) ... 5 Ohms Measurement (724 and 725) ... 5 Ohms Measurement (726) ... 5 Ohms Source (724 and 725) ... 5 Ohms Source (726) ... 6 Frequency Measurement (725) ... 6 Frequency Measurement (726) ... 6 Frequency Source (725) ... 6 Frequency Source (726) ... 7 Millivolt Measurement and Source (724 and 725) ... 7 Temperature, Thermocouples (724 and 725) ... 7 Temperature, Thermocouples (726) ... 8 Temperature, RTD Ranges, and Accuracies (724 and 725) ... 9 RTD Accuracy (Read and Source) (ITS-90) (726) ... 10 Loop Power supply ... 11 Pressure Measurement (725 and 726) ... 11 Pulse Read and Pulse Source (726) ... 11 Pressure Units Availability (725) ... 11 General Specifications ... 12 Cleaning the Calibrator ... 12 Replacing the Batteries ... 12 Fuses ... 13 Remote Control Interface (725 and 726) ... 14 Serial Command List (726) ... 17 Required Equipment ... 22 Performance Tests ... 24 Preparing for the Performance Tests ... 24 Upper Display Voltage Measurement Tests ... 25 Lower Display mV/TC Measurement Tests ... 26 Lower Display Voltage Measurement Tests ... 27 Upper Display mA Measurement Tests ... 28 Lower Display mA Measurement Tests (725 and 726) ... 29 Lower Display Frequency Measurement Test (725 and 726) ... 30 Lower Display Frequency Source Test (725 and 726) ... 31 Lower Display 4-Wire Resistance Measurement Tests ... 32 Lower Display 3-Wire RTD Measurement ... 33 Lower Display Thermocouple Measurement Tests ... 34 Lower Display Thermocouple Source Test ... 35 Lower Display mA Source Tests (725 and 726) ... 36 Lower Display mV Source Tests ... 37 Lower Display Voltage Source Tests ... 37 Lower Display Ohms Source Tests ... 38 Pressure Module Input (725/726) ... 39 Calibration Adjustment ... 39 Setup ... 39 Initiating Communication (724 and 725) ... 40 Calibration Adjustment Procedures (724 and 725) ... 41 Cal Volts Input ... 41 Cal Volts Output ... 42 Cal mA Input (Fluke 725 Only) ... 43 Cal mA Output (725 Only) ... 44 Cal mV Input ... 45 Cal mV Output ... 46 Cal Thermocouples ... 47 Cal Ohms Hi Source ... 48 Cal Ohms Low Source ... 49 Cal RTD Low Range ... 50 Cal RTD Hi Range ... 51 Cal ISO Volts ... 52 Cal ISO mA ... 53 Calibration Adjustment Procedures (726) ... 54 Initiating Communication ... 54 Calibrating Isolated mA Input ... 55 Calibrating Isolated Voltage Input ... 56 Calibrating mA Input ... 57 Calibrating mA Output ... 58 Calibrating Voltage Input ... 59 Calibrating Voltage Output ... 60 Calibrating Low Ohms Source ... 61 Calibrating High Ohms Source ... 62 Calibrating Ohms Measure ... 63 Calibrating Thermocouple mV Output ... 64 Calibrating Thermocouple mV Input ... 65 Calibrating Thermocouple CJC: ... 66 Replaceable Parts ...

Fluke-6492-Manual-Page-1-Picture


Comments (0)

No comments yet. Be the first!

Add Comment

* Required information
1000
Captcha Image
Powered by Commentics