Tektronix TDS 694C Oscilloscope
Manufacturer:
No picture available!
Maybe you can upload a pic for the
Tektronix TDS 694C ?
If you have any other manuals for the
Tektronix TDS 694C you can upload the files here .
Model:
TDS 694C
Date:
1999
Category:
Group:
Description:
Information
Whether you are working on next generation
microprocessor designs, high-speed data
communications equipment or in high-energy
physics research, the TDS694C captures
your fastest signals with the best fidelity and
resolution available. Its 3 GHz bandwidth
preserves your waveform’s fast rising edges
and accurately shows signal details. With
10 GS/s digitizing rate simultaneously on all
four channels and a high-stability timebase,
the TDS694C makes your critical timing
measurements with the highest resolution
and accuracy – even channel-to-channel
measurements made in a single acquisition.
The TDS600C oscilloscopes incorporate all
the advanced trigger features you expect in
a high performance oscilloscope: triggering
on Glitches, Slew Rate violations, Setup-and-
hold Time violations, Timeouts, Logic Patterns
and States on four channels. For applications
where sophisticated multi-channel debugging
is required, the TDS694C can be configured
for cross triggering with a
Tektronix TLA700
Logic
Analyzer.
The TDS600C oscilloscopes give you the total
solution to your digital design characterization
and debugging needs. Now you have the tool
you need to verify design margins, characterize
setup-and-hold times and measure clock-
to-data skew on the fastest digital designs.
The TDS694C’s companion probe, the P6249,
offers small size to reliably contact your high-
density boards with their fine-pitch, hard to
reach components. The P6249 has short
ground connection to give the maximum
system bandwidth and preserve the details
of your signals.
The TDS600C offers 29 automatic measurements, with
measurement statistics, to make
your design verification and characterization
job much faster and easier. Available Java-
based application packages for jitter analysis,
disk drive measurements and processor
specification measurements provide customized measurements
and analysis capability.
The TDS600C gives you the performance and
features you need to get your job done faster
and more thoroughly.
Manual Type:
Service Manual
Pages:
330
Size:
4.28 Mbytes (4491816 Bytes)
Language:
english
Revision:
Manual-ID:
071-0627-02
Date:
Quality:
Electronic document, no scan, very well readable.
Upload date:
2017 12 25
MD5:
800d42e6f00f29ebddae10b84749d59c
Downloads:
6738
Information
This manual is divided into sections, such as Specifications
and Theory of
Operation. Further, it is divided into subsections, such as
Product Description
and Removal and Installation Procedures.
Sections containing procedures also contain introductions to
those procedures. Be
sure to read these introductions because they provide
information needed to do
the service correctly and efficiently. The following is a
brief description of each
manual section.
H
Specifications contains a product description of the TDS
500D,
TDS 600C,
TDS 700D and
TDS 714L Oscilloscopes and tables of the
characteristics and
descriptions that apply to it.
H
Operating Information includes general information and
operating instruc-
tions at the level needed to safely power on and service
this
Oscilloscope. A
statement of the service strategy that this manual supports,
and instructions
for shipment of the oscilloscopes are found in this section.
H
Theory of Operation contains circuit descriptions that
support general service
and fault isolation.
H
Performance Verification contains a collection of
procedures for confirming
that these oscilloscopes function properly and meet
warranted limits.
H
Adjustment Procedures contains a collection of procedures
for adjusting
these oscilloscopes to meet warranted limits.
Maintenance contains information and procedures for doing
preventive and
corrective maintenance of these oscilloscopes. Instructions
for cleaning, for
module removal and installation, and for fault isolation to
a module are
found here.
Options contains information on servicing any of the
factory-installed
options that may be present in your
Oscilloscope.
Electrical Parts List contains a statement referring you to
Mechanical
Replaceable Parts, where both electrical and mechanical
modules are listed.
Diagrams contains a block diagram and an interconnection
diagram useful
for isolating failed modules.
Mechanical Parts List includes a table of all replaceable
modules, their
descriptions, and their
Tektronix part numbers.
Manual Type:
Datasheet
Pages:
4
Size:
825.54 Kbytes (845349 Bytes)
Language:
english
Revision:
Manual-ID:
55W-10066-7
Date:
Quality:
Electronic document, no scan, very well readable.
Upload date:
2014 11 23
MD5:
befa4fc33c0faaded30ea05b9bd2cec5
Downloads:
2109
Manual Type:
User Manual
Pages:
301
Size:
2.17 Mbytes (2280421 Bytes)
Language:
english
Revision:
Manual-ID:
071-0473-00
Date:
Quality:
Electronic document, no scan, very well readable.
Upload date:
2019 09 22
MD5:
ed7457bfed92cfb702d8609ce065ce38
Downloads:
351
Information
Metravo 4D Operating instructions
1. Description
... 5
1.1 General
...
5
1.2 Theory of operation
... 6
2. Specifications
... 8
3. Overload protection
... 13
3.1 Internal r e s is ta n c e
... 13
3.2 Melting fuse and protective diodes ... 13
3.3 Overvoltage arrester
... 14
4. Operation
...
14
4.1 Start-up
...
14
4.2 Information on using the instrument ... 15
4.3 Voltage measurement
... 17
4.3.1 DC and AC voltages up to 650 V
... 17
4.3.2 DC voltages up to 30 kV
... 17
4.4 Current measurement
... 18
4.4.1 DC and AC currents up to 2 A
... 19
4.4.2 DC and AC currents up to 10 A ... 19
4.4.3 DC and AC currents above 10 A ... 19
4.4.4 AC currents with (split-core) current
transformers
... 20
4.5 Measurement of composite voltages and
composite currents
... 21
4.5.1 Measurement of DC voltage and DC current
with superimposed AC c o m p o n e n t ... 21
4.5.2 Measurement of AC voltage with
superimposed DC voltage ... 22
4.5.3 Measurement of AC current with
superimposed DC current ... 22
4.6 Resistance m e a s u rem e n t
... 22
5. Maintenance
... 23
5.1 Batteries
...
24
5.2 Melting fuse .
... 24
5.3 Case
...
25
6. Repair and replacement part service ... 25
Comments