Equipment information

Huntron Instruments 5100DS Test Set
Manufacturer:
Huntron Instruments
Model: 5100DS
Date: 1988
Category: Measurement instruments
Group: Test Set
Description: Tracker
Information:

The Huntron Tracker 5100DS is a computer-controlled troubleshooting tool having the following Features: • Digital storage of analog signatures. • Four impedance ranges (low, medium lt medium 2, high). • Range control: any or all ranges can be enabled during automatic test. • 200 Hz test signal frequency. • Large CRT display with easy-to-operate controls. Easy test connections to devices with up to 64 pins. • Zero Insertion Force (ZIF) socket for testing loose DIP ICs with up lo 40 pins. • GPIB (IEEE-488) Interface for communication with a GPIB-equipped PC/XT/AT or PS/2.

These manuals are available for the above equipment:

Manual Type: User Manual Huntron-5655-Manual-Page-1-Picture
Pages: 204
Size: 6.79 Mbytes (7116256 Bytes)
Language: english
Revision: 3
Manual-ID/Number: 21-1145
Date: April 1991
Quality: Scanned document, reading partly badly, partly not readable.
Upload date:
MD5: c627cab6006a39e0a6d61b942fdab3f7
Downloads: 751 since 11 March 2014
Information:

Huntron-5655-Manual-Page-1-Picture


Manual Type: Service and User Manual Huntron-5654-Manual-Page-1-Picture
Pages: 138
Size: 1.81 Mbytes (1893155 Bytes)
Language: english
Revision: 1
Manual-ID/Number: 21-1146
Date: May 1991
Quality: Scanned document, all readable.
Upload date:
MD5: c63917d6884c9c9ccd70d004df22bacd
Downloads: 434 since 11 March 2014
Information:

This manual is intended for service technicians who will be calibrating and/or troubleshooting the Tracker 5100DS. This manual assumes the reader is familiar with basic solid-stale electronics and the operation of electronic test Section 1 INTRODUCTION AND SPECIFICATIONS, Introduces the Tracker 5100DS and provides electrical, environmental» and physical specifications. instruments. Section 2 THEORY OF OPERATION, Describes how the Tracker 5100DS works. An operational overview is given followed by descriptions or the major sections of circuitry and their respective functions. Section 3 MAINTENANCE. Provides service information which includes disassembly /reassembly instructions, performance tests, calibration instructions, and troubleshooting information. Section 4 LIST OF REPLACEABLE PARTS. Provides complete parts lists for the Tracker 5100DS. Section 5 SCHEMATIC DIAGRAMS. Provides detailed schematics of the Tracker 5100DS.

Huntron-5654-Manual-Page-1-Picture


Comments (0)

No comments yet. Be the first!

Add Comment

* Required information
1000
Captcha Image