Geräte Informationen

Hewlett Packard 8012B Generator
Hersteller:
Hewlett Packard
Modell: 8012B
Datum: 1977
Kategorie: Messgeräte
Gruppe: Generator
Beschreibung: Pulse Generator
Informationen:

The 8012B is an extremely versatile, easy- to-operate pulse Generator with a wide range of applications. It has a complete set of variable pulse parameters with a repetition rate of 0—50 MHz and transition times as low as 5ns. This makes it ideal for testing digital logic: RTL, DTL, TTL, some ECL and some MOS can be dynamically tested and noise patterns can be simulated. Any triangular or trapezoidal waveforms can be generated (up to a maximum ratio of 1:100 or 100:1 between leading and trailing edge transitions) over the entire frequency range. The pulse polarity can be set to positive or negative and the pulse output format to symmetrical, normal or complement using front panel switches, without affecting pulse amplitude or offset. The complement format can be used to obtain duty cycles of 100% and symmetrical format provides a means of checking device threshold, driving operational amplifiers and simulating Amplifier outputs. The 8012B has a selectable source impedance which makes impedance matching to the circuit under test very simple. It also has a square wave facility that is independent of width and delay settings and a double pulse facility that is useful for testing device recovery times and making noise immunity measure

Folgende Handbücher sind hierfür verfügbar:

Dokumenttyp: Service- und Bedienungsanleitung HewlettPackard-4943-Manual-Page-1-Picture
Seitenanzahl: 117
Dateigröße: 46.41 Mbytes (48659490 Bytes)
Sprache: Englisch
Revision:
Dokument-ID/Nummer: 08012-90505
Datum: Oktober 1977
Qualität: Gescanntes Dokument, alles ist lesbar.
Upload Datum:
MD5: b787be697bd92739367b70ccc9cdf500
Downloads: 222 seit dem 30 November 2013
Informationen:

This manual applies directly to instruments with serial number 1633 G 00491 and higher. Any changes made in instruments having serial numbers higher than the above number will be found in a "Manual Changes” supplement supplied with this manual. Be sure to examine this supplement for any changes which apply to your instrument and record these changes in the manual.

HewlettPackard-4943-Manual-Page-1-Picture


Comments (0)

No comments yet. Be the first!

Add Comment

* Required information
1000
Captcha Image
Powered by Commentics